+++ /dev/null
-#
-# Copyright (C) 2006-2012 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-BLOCK_MENU:=Block Devices
-
-define KernelPackage/aoe
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=ATA over Ethernet support
- KCONFIG:=CONFIG_ATA_OVER_ETH
- FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
- AUTOLOAD:=$(call AutoLoad,30,aoe)
-endef
-
-define KernelPackage/aoe/description
- Kernel support for ATA over Ethernet
-endef
-
-$(eval $(call KernelPackage,aoe))
-
-
-define KernelPackage/ata-core
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Serial and Parallel ATA support
- DEPENDS:=@PCI_SUPPORT +kmod-scsi-core
- KCONFIG:=CONFIG_ATA
- FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
- AUTOLOAD:=$(call AutoLoad,21,libata,1)
-endef
-
-$(eval $(call KernelPackage,ata-core))
-
-
-define AddDepends/ata
- SUBMENU:=$(BLOCK_MENU)
- DEPENDS+=kmod-ata-core $(1)
-endef
-
-
-define KernelPackage/ata-ahci
- TITLE:=AHCI Serial ATA support
- KCONFIG:=CONFIG_SATA_AHCI
- FILES:= \
- $(LINUX_DIR)/drivers/ata/ahci.ko \
- $(LINUX_DIR)/drivers/ata/libahci.ko
- AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-ahci/description
- Support for AHCI Serial ATA controllers.
-endef
-
-$(eval $(call KernelPackage,ata-ahci))
-
-
-define KernelPackage/ata-artop
- TITLE:=ARTOP 6210/6260 PATA support
- KCONFIG:=CONFIG_PATA_ARTOP
- FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
- AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-artop/description
- PATA support for ARTOP 6210/6260 host controllers.
-endef
-
-$(eval $(call KernelPackage,ata-artop))
-
-
-define KernelPackage/ata-marvell-sata
- TITLE:=Marvell Serial ATA support
- KCONFIG:=CONFIG_SATA_MV
- FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
- AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-marvell-sata/description
- SATA support for marvell chipsets
-endef
-
-$(eval $(call KernelPackage,ata-marvell-sata))
-
-
-define KernelPackage/ata-nvidia-sata
- TITLE:=Nvidia Serial ATA support
- KCONFIG:=CONFIG_SATA_NV
- FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
- AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
- $(call AddDepends/ata)
-endef
-
-$(eval $(call KernelPackage,ata-nvidia-sata))
-
-
-define KernelPackage/ata-pdc202xx-old
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Older Promise PATA controller support
- DEPENDS:=kmod-ata-core
- KCONFIG:= \
- CONFIG_ATA_SFF=y \
- CONFIG_PATA_PDC_OLD
- FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
- AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
-endef
-
-define KernelPackage/ata-pdc202xx-old/description
- This option enables support for the Promise 20246, 20262, 20263,
- 20265 and 20267 adapters.
-endef
-
-$(eval $(call KernelPackage,ata-pdc202xx-old))
-
-
-define KernelPackage/ata-piix
- TITLE:=Intel PIIX PATA/SATA support
- KCONFIG:=CONFIG_ATA_PIIX
- FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
- AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-piix/description
- SATA support for Intel ICH5/6/7/8 series host controllers and
- PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
-endef
-
-$(eval $(call KernelPackage,ata-piix))
-
-
-define KernelPackage/ata-sil
- TITLE:=Silicon Image SATA support
- KCONFIG:=CONFIG_SATA_SIL
- FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
- AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-sil/description
- Support for Silicon Image Serial ATA controllers.
-endef
-
-$(eval $(call KernelPackage,ata-sil))
-
-
-define KernelPackage/ata-sil24
- TITLE:=Silicon Image 3124/3132 SATA support
- KCONFIG:=CONFIG_SATA_SIL24
- FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
- AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-sil24/description
- Support for Silicon Image 3124/3132 Serial ATA controllers.
-endef
-
-$(eval $(call KernelPackage,ata-sil24))
-
-
-define KernelPackage/ata-sis
- TITLE:=SIS SATA support
- KCONFIG:=CONFIG_SATA_SIS
- FILES:=$(LINUX_DIR)/drivers/ata/sata_sis.ko
- AUTOLOAD:=$(call AutoLoad,41,sata_sis,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-sis/description
- Support for SIS Serial ATA controllers.
-endef
-
-$(eval $(call KernelPackage,ata-sis))
-
-
-define KernelPackage/ata-via-sata
- TITLE:=VIA SATA support
- KCONFIG:=CONFIG_SATA_VIA
- FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
- AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
- $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-via-sata/description
- This option enables support for VIA Serial ATA.
-endef
-
-$(eval $(call KernelPackage,ata-via-sata))
-
-
-define KernelPackage/block2mtd
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Block device MTD emulation
- KCONFIG:=CONFIG_MTD_BLOCK2MTD
- FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
-endef
-
-$(eval $(call KernelPackage,block2mtd))
-
-
-define KernelPackage/dm
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Device Mapper
- # All the "=n" are unnecessary, they're only there
- # to stop the config from asking the question.
- # MIRROR is M because I've needed it for pvmove.
- KCONFIG:= \
- CONFIG_BLK_DEV_MD=n \
- CONFIG_DM_DEBUG=n \
- CONFIG_DM_UEVENT=n \
- CONFIG_DM_DELAY=n \
- CONFIG_DM_MULTIPATH=n \
- CONFIG_DM_ZERO=n \
- CONFIG_DM_SNAPSHOT=n \
- CONFIG_DM_LOG_USERSPACE=n \
- CONFIG_MD=y \
- CONFIG_BLK_DEV_DM \
- CONFIG_DM_CRYPT \
- CONFIG_DM_MIRROR
- FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
- AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
-endef
-
-define KernelPackage/dm/description
- Kernel module necessary for LVM2 support
-endef
-
-$(eval $(call KernelPackage,dm))
-
-
-define KernelPackage/md-mod
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=MD RAID
- KCONFIG:= \
- CONFIG_MD=y \
- CONFIG_BLK_DEV_MD=m \
- CONFIG_MD_AUTODETECT=y \
- CONFIG_MD_FAULTY=n
- FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
- AUTOLOAD:=$(call AutoLoad,27,md-mod)
-endef
-
-define KernelPackage/md-mod/description
- Kernel RAID md module (md-mod.ko).
- You will need to select at least one RAID level module below.
-endef
-
-$(eval $(call KernelPackage,md-mod))
-
-
-define KernelPackage/md/Depends
- SUBMENU:=$(BLOCK_MENU)
- DEPENDS:=kmod-md-mod $(1)
-endef
-
-
-define KernelPackage/md-linear
-$(call KernelPackage/md/Depends,)
- TITLE:=RAID Linear Module
- KCONFIG:=CONFIG_MD_LINEAR
- FILES:=$(LINUX_DIR)/drivers/md/linear.ko
- AUTOLOAD:=$(call AutoLoad,28,linear)
-endef
-
-define KernelPackage/md-linear/description
- RAID "Linear" or "Append" driver module (linear.ko)
-endef
-
-$(eval $(call KernelPackage,md-linear))
-
-
-define KernelPackage/md-raid0
-$(call KernelPackage/md/Depends,)
- TITLE:=RAID0 Module
- KCONFIG:=CONFIG_MD_RAID0
- FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
- AUTOLOAD:=$(call AutoLoad,28,raid0)
-endef
-
-define KernelPackage/md-raid0/description
- RAID Level 0 (Striping) driver module (raid0.ko)
-endef
-
-$(eval $(call KernelPackage,md-raid0))
-
-
-define KernelPackage/md-raid1
-$(call KernelPackage/md/Depends,)
- TITLE:=RAID1 Module
- KCONFIG:=CONFIG_MD_RAID1
- FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
- AUTOLOAD:=$(call AutoLoad,28,raid1)
-endef
-
-define KernelPackage/md-raid1/description
- RAID Level 1 (Mirroring) driver (raid1.ko)
-endef
-
-$(eval $(call KernelPackage,md-raid1))
-
-
-define KernelPackage/md-raid10
-$(call KernelPackage/md/Depends,)
- TITLE:=RAID10 Module
- KCONFIG:=CONFIG_MD_RAID10
- FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
- AUTOLOAD:=$(call AutoLoad,28,raid10)
-endef
-
-define KernelPackage/md-raid10/description
- RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
-endef
-
-$(eval $(call KernelPackage,md-raid10))
-
-
-define KernelPackage/md-raid456
-$(call KernelPackage/md/Depends,)
- TITLE:=RAID Level 456 Driver
- KCONFIG:= \
- CONFIG_XOR_BLOCKS \
- CONFIG_ASYNC_CORE \
- CONFIG_ASYNC_MEMCPY \
- CONFIG_ASYNC_XOR \
- CONFIG_ASYNC_PQ \
- CONFIG_ASYNC_RAID6_RECOV \
- CONFIG_ASYNC_RAID6_TEST=n \
- CONFIG_MD_RAID6_PQ \
- CONFIG_MD_RAID456 \
- CONFIG_MULTICORE_RAID456=n
- FILES:= \
- $(LINUX_DIR)/crypto/xor.ko \
- $(LINUX_DIR)/crypto/async_tx/async_tx.ko \
- $(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
- $(LINUX_DIR)/crypto/async_tx/async_xor.ko \
- $(LINUX_DIR)/crypto/async_tx/async_pq.ko \
- $(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
- $(LINUX_DIR)/drivers/md/raid456.ko \
- $(LINUX_DIR)/lib/raid6/raid6_pq.ko
- AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
-endef
-
-define KernelPackage/md-raid456/description
- RAID Level 4,5,6 kernel module (raid456.ko)
-
- Includes the following modules required by
- raid456.ko:
- xor.ko
- async_tx.ko
- async_xor.ko
- async_memcpy.ko
- async_pq.ko
- async_raid5_recov.ko
- raid6_pq.ko
-endef
-
-$(eval $(call KernelPackage,md-raid456))
-
-
-define KernelPackage/md-multipath
-$(call KernelPackage/md/Depends,)
- TITLE:=MD Multipath Module
- KCONFIG:=CONFIG_MD_MULTIPATH
- FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
- AUTOLOAD:=$(call AutoLoad,29,multipath)
-endef
-
-define KernelPackage/md-multipath/description
- Multipath driver module (multipath.ko)
-endef
-
-$(eval $(call KernelPackage,md-multipath))
-
-
-define KernelPackage/ide-core
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=IDE (ATA/ATAPI) device support
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:= \
- CONFIG_IDE \
- CONFIG_BLK_DEV_IDE \
- CONFIG_BLK_DEV_IDEDISK \
- CONFIG_IDE_GD \
- CONFIG_IDE_GD_ATA=y \
- CONFIG_IDE_GD_ATAPI=n \
- CONFIG_IDEPCI_PCIBUS_ORDER=y \
- CONFIG_BLK_DEV_IDEDMA_PCI=y \
- CONFIG_BLK_DEV_IDEPCI=y
- FILES:= \
- $(LINUX_DIR)/drivers/ide/ide-core.ko \
- $(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
- AUTOLOAD:= \
- $(call AutoLoad,20,ide-core,1) \
- $(call AutoLoad,40,ide-gd_mod,1)
-endef
-
-define KernelPackage/ide-core/description
- Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
- Includes:
- - ide-core
- - ide-gd_mod
-endef
-
-$(eval $(call KernelPackage,ide-core))
-
-
-define AddDepends/ide
- SUBMENU:=$(BLOCK_MENU)
- DEPENDS+=kmod-ide-core $(1)
-endef
-
-
-define KernelPackage/ide-generic
- SUBMENU:=$(BLOCK_MENU)
- DEPENDS:=@PCI_SUPPORT
- TITLE:=Kernel support for generic PCI IDE chipsets
- KCONFIG:=CONFIG_BLK_DEV_GENERIC
- FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
- AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
- $(call AddDepends/ide)
-endef
-
-$(eval $(call KernelPackage,ide-generic))
-
-
-define KernelPackage/ide-generic-old
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Kernel support for generic (legacy) IDE chipsets
- KCONFIG:=CONFIG_IDE_GENERIC
- FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
- AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
- $(call AddDepends/ide)
-endef
-
-$(eval $(call KernelPackage,ide-generic-old))
-
-
-define KernelPackage/ide-aec62xx
- TITLE:=Acard AEC62xx IDE driver
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:=CONFIG_BLK_DEV_AEC62XX
- FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
- AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
- $(call AddDepends/ide)
-endef
-
-define KernelPackage/ide-aec62xx/description
- Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
-endef
-
-$(eval $(call KernelPackage,ide-aec62xx,1))
-
-
-define KernelPackage/ide-pdc202xx
- TITLE:=Promise PDC202xx IDE driver
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
- FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
- AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
- $(call AddDepends/ide)
-endef
-
-define KernelPackage/ide-pdc202xx/description
- Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
- controllers.
-endef
-
-$(eval $(call KernelPackage,ide-pdc202xx))
-
-
-define KernelPackage/ide-it821x
- TITLE:=ITE IT821x IDE driver
- DEPENDS:=@PCI_SUPPORT
- KCONFIG:=CONFIG_BLK_DEV_IT821X
- FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
- AUTOLOAD:=$(call AutoLoad,30,it821x,1)
- $(call AddDepends/ide)
-endef
-
-define KernelPackage/ide-it821x/description
- Kernel module for the ITE IDE821x IDE controllers.
-endef
-
-$(eval $(call KernelPackage,ide-it821x))
-
-
-define KernelPackage/libsas
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=SAS Domain Transport Attributes
- KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
- CONFIG_SCSI_SAS_ATTRS \
- CONFIG_SCSI_SAS_ATA=y \
- CONFIG_SCSI_SAS_HOST_SMP=y \
- CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
- FILES:= \
- $(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
- $(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
- AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
-endef
-
-define KernelPackage/libsas/description
- SAS Domain Transport Attributes support.
-endef
-
-$(eval $(call KernelPackage,libsas,1))
-
-
-define KernelPackage/loop
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Loopback device support
- KCONFIG:= \
- CONFIG_BLK_DEV_LOOP \
- CONFIG_BLK_DEV_CRYPTOLOOP=n
- FILES:=$(LINUX_DIR)/drivers/block/loop.ko
- AUTOLOAD:=$(call AutoLoad,30,loop)
-endef
-
-define KernelPackage/loop/description
- Kernel module for loopback device support
-endef
-
-$(eval $(call KernelPackage,loop))
-
-
-define KernelPackage/mvsas
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Marvell 88SE6440 SAS/SATA driver
- DEPENDS:=@TARGET_x86 +kmod-libsas
- KCONFIG:= \
- CONFIG_SCSI_MVSAS \
- CONFIG_SCSI_MVSAS_TASKLET=n
- FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
- AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
-endef
-
-define KernelPackage/mvsas/description
- Kernel support for the Marvell SAS SCSI adapters
-endef
-
-$(eval $(call KernelPackage,mvsas))
-
-
-define KernelPackage/nbd
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Network block device support
- KCONFIG:=CONFIG_BLK_DEV_NBD
- FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
- AUTOLOAD:=$(call AutoLoad,30,nbd)
-endef
-
-define KernelPackage/nbd/description
- Kernel module for network block device support
-endef
-
-$(eval $(call KernelPackage,nbd))
-
-
-define KernelPackage/scsi-core
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=SCSI device support
- KCONFIG:= \
- CONFIG_SCSI \
- CONFIG_BLK_DEV_SD
- FILES:= \
- $(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
- $(LINUX_DIR)/drivers/scsi/sd_mod.ko
- AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
-endef
-
-$(eval $(call KernelPackage,scsi-core))
-
-
-define KernelPackage/scsi-generic
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Kernel support for SCSI generic
- DEPENDS:=+kmod-scsi-core
- KCONFIG:= \
- CONFIG_CHR_DEV_SG
- FILES:= \
- $(LINUX_DIR)/drivers/scsi/sg.ko
- AUTOLOAD:=$(call AutoLoad,65,sg)
-endef
-
-$(eval $(call KernelPackage,scsi-generic))
-
-
-define KernelPackage/scsi-cdrom
- SUBMENU:=$(BLOCK_MENU)
- TITLE:=Kernel support for CD / DVD drives
- DEPENDS:=+kmod-scsi-core
- KCONFIG:= \
- CONFIG_BLK_DEV_SR \
- CONFIG_BLK_DEV_SR_VENDOR=n
- FILES:= \
- $(LINUX_DIR)/drivers/cdrom/cdrom.ko \
- $(LINUX_DIR)/drivers/scsi/sr_mod.ko
- AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
-endef
-
-$(eval $(call KernelPackage,scsi-cdrom))
-
projects / openwrt / staging / yousong.git / blobdiff