brcm2708: remove linux 4.4 support

[openwrt/staging/yousong.git] / target / linux / brcm2708 / patches-4.4 / 0122-bcm270x_dt-Add-dwc2-and-dwc-otg-overlays.patch

diff --git a/target/linux/brcm2708/patches-4.4/0122-bcm270x_dt-Add-dwc2-and-dwc-otg-overlays.patch b/target/linux/brcm2708/patches-4.4/0122-bcm270x_dt-Add-dwc2-and-dwc-otg-overlays.patch
deleted file mode 100644 (file)
index 2924275..0000000
--- a/target/linux/brcm2708/patches-4.4/0122-bcm270x_dt-Add-dwc2-and-dwc-otg-overlays.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From eb92559814cd3054166d9e53765d7c193f0b2f41 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
-Date: Thu, 31 Dec 2015 16:44:58 +0100
-Subject: [PATCH] bcm270x_dt: Add dwc2 and dwc-otg overlays
-
----
- arch/arm/boot/dts/overlays/Makefile            |  2 ++
- arch/arm/boot/dts/overlays/README              | 21 +++++++++++++++++++
- arch/arm/boot/dts/overlays/dwc-otg-overlay.dts | 20 ++++++++++++++++++
- arch/arm/boot/dts/overlays/dwc2-overlay.dts    | 29 ++++++++++++++++++++++++++
- 4 files changed, 72 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/dwc-otg-overlay.dts
- create mode 100644 arch/arm/boot/dts/overlays/dwc2-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -15,6 +15,8 @@ endif
- dtb-$(RPI_DT_OVERLAYS) += ads7846-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += at86rf233-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += bmp085_i2c-sensor-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += dwc2-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += dwc-otg-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += dht11-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += enc28j60-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += gpio-ir-overlay.dtb
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -198,6 +198,27 @@ Params: gpiopin                  GPIO co
-                                  (default 4)
- 
- 
-+Name:   dwc-otg
-+Info:   Selects the dwc_otg USB controller driver which has fiq support. This
-+        is the default on all except the Pi Zero which defaults to dwc2.
-+Load:   dtoverlay=dwc-otg
-+Params: <None>
-+
-+
-+Name:   dwc2
-+Info:   Selects the dwc2 USB controller driver
-+Load:   dtoverlay=dwc2,<param>=<val>
-+Params: dr_mode                  Dual role mode: "host", "peripheral" or "otg"
-+
-+        g-rx-fifo-size           Size of rx fifo size in gadget mode
-+
-+        g-np-tx-fifo-size        Size of non-periodic tx fifo size in gadget
-+                                 mode
-+
-+        g-tx-fifo-size           Size of periodic tx fifo per endpoint
-+                                 (except ep0) in gadget mode
-+
-+
- [ The ds1307-rtc overlay has been deleted. See i2c-rtc. ]
- 
- 
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/dwc-otg-overlay.dts
-@@ -0,0 +1,20 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+      compatible = "brcm,bcm2708";
-+
-+      fragment@0 {
-+              target = <&usb>;
-+              #address-cells = <1>;
-+              #size-cells = <1>;
-+              __overlay__ {
-+                      compatible = "brcm,bcm2708-usb";
-+                      reg = <0x7e980000 0x10000>,
-+                            <0x7e006000 0x1000>;
-+                      interrupts = <2 0>,
-+                                   <1 9>;
-+                      status = "okay";
-+              };
-+      };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts
-@@ -0,0 +1,29 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+      compatible = "brcm,bcm2708";
-+
-+      fragment@0 {
-+              target = <&usb>;
-+              #address-cells = <1>;
-+              #size-cells = <1>;
-+              __overlay__ {
-+                      compatible = "brcm,bcm2835-usb";
-+                      reg = <0x7e980000 0x10000>;
-+                      interrupts = <1 9>;
-+                      dr_mode = "otg";
-+                      g-np-tx-fifo-size = <32>;
-+                      g-rx-fifo-size = <256>;
-+                      g-tx-fifo-size = <256 128 128 64 64 64 32>;
-+                      status = "okay";
-+              };
-+      };
-+
-+      __overrides__ {
-+              dr_mode = <&usb>, "dr_mode";
-+              g-np-tx-fifo-size = <&usb>,"g-np-tx-fifo-size:0";
-+              g-rx-fifo-size = <&usb>,"g-rx-fifo-size:0";
-+              g-tx-fifo-size = <&usb>,"g-tx-fifo-size:0";
-+      };
-+};