brcm2708: remove linux 4.4 support

[openwrt/staging/yousong.git] / target / linux / brcm2708 / patches-4.4 / 0445-BCM270X-Add-the-DSI-and-DSI-panel-nodes-to-the-VC4-o.patch

diff --git a/target/linux/brcm2708/patches-4.4/0445-BCM270X-Add-the-DSI-and-DSI-panel-nodes-to-the-VC4-o.patch b/target/linux/brcm2708/patches-4.4/0445-BCM270X-Add-the-DSI-and-DSI-panel-nodes-to-the-VC4-o.patch
deleted file mode 100644 (file)
index 384ef59..0000000
--- a/target/linux/brcm2708/patches-4.4/0445-BCM270X-Add-the-DSI-and-DSI-panel-nodes-to-the-VC4-o.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 2a089ea1c91d13333302ca181643ead14fbc461b Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Thu, 2 Jun 2016 15:09:35 -0700
-Subject: [PATCH] BCM270X: Add the DSI and DSI panel nodes to the VC4 overlay.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2708_common.dtsi              | 24 ++++++++++++++++++++--
- arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 16 +++++++++++++++
- 2 files changed, 38 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708_common.dtsi
-+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
-@@ -2,6 +2,7 @@
- #include <dt-bindings/clock/bcm2835-aux.h>
- #include "dt-bindings/power/raspberrypi-power.h"
- #include "dt-bindings/gpio/gpio.h"
-+#include "dt-bindings/pinctrl/bcm2835.h"
- #include "skeleton.dtsi"
- 
- / {
-@@ -110,9 +111,10 @@
-                       reg = <0x7e101000 0x2000>;
- 
-                       /* CPRMAN derives everything from the platform's
--                       * oscillator.
-+                       * oscillator except for a few clocks that may
-+                       * derive from something else derived from CPRMAN..
-                        */
--                      clocks = <&clk_osc>;
-+                      clocks = <&clk_osc>, <&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
-                       status = "disabled";
-               };
- 
-@@ -282,6 +284,24 @@
-                       status = "disabled";
-               };
- 
-+              dsi1: dsi@7e700000 {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      #clock-cells = <1>;
-+
-+                      compatible = "brcm,bcm2835-dsi1";
-+                      reg = <0x7e700000 0x8c>;
-+                      interrupts = <2 12>;
-+
-+                      clocks = <&cprman BCM2835_PLLD_DSI1>,
-+                               <&cprman BCM2835_CLOCK_DSI1E>,
-+                               <&cprman BCM2835_CLOCK_DSI1P>;
-+                      clock-names = "phy", "escape", "pixel";
-+                      clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr";
-+                      status = "disabled";
-+                      power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-+              };
-+
-               i2c1: i2c@7e804000 {
-                       compatible = "brcm,bcm2708-i2c";
-                       reg = <0x7e804000 0x1000>;
---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-@@ -126,6 +126,22 @@
-               };
-       };
- 
-+      fragment@16 {
-+              target = <&dsi1>;
-+              __overlay__  {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+                      status = "okay";
-+
-+                      brcm,panel = <&pitouchscreen>;
-+
-+                      pitouchscreen: panel {
-+                              compatible = "raspberrypi,touchscreen";
-+                              reg = <0>;
-+                      };
-+              };
-+      };
-+
-       __overrides__ {
-               cma-256 = <0>,"+0-1-2-3-4";
-               cma-192 = <0>,"-0+1-2-3-4";