#!/bin/sh /etc/rc.common # Copyright (C) 2006 OpenWrt.org START=05 start() { [ -e /etc/config/network ] && { local batch config_cb() { case "$1" in switch) option_cb() { case "$1" in vlan[0-9]|vlan1[0-5]) local id="${1#vlan}" append batch "delete network.eth0.${1}${N}" append batch "set network.eth0_${id}=switch_vlan${N}" append batch "set network.eth0_${id}.device=eth0${N}" append batch "set network.eth0_${id}.vlan=${id}${N}" append batch "set network.eth0_${id}.ports='${2}'${N}" ;; esac } ;; switch_vlan) option_cb() { :; } batch="" ;; esac } config_load network [ -n "$batch" ] && { logger -t netconfig "migrating switch config to new format ..." echo "$batch${N}commit network" | uci batch } exit 0 } mkdir -p /etc/config ( if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then # WGT634u echo boardtype=wgt634u else strings "$(find_mtd_part nvram)" fi ) | awk ' function p(cfgname, name) { if (c[name] != "") print " option " cfgname " \"" c[name] "\"" } function vlan(id, name) { if (c[name] != "") { print "config switch_vlan eth0_" id print " option device \"eth0\"" print " option vlan " id print " option ports \"" c[name] "\"" print "" } } function macinc(mac, maca, i, result) { split(mac, maca, ":") for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i] if (++maca[6] > 0xff) { maca[5]++ maca[6] = 0 } for (i = 1; i <= 6; i++) { if (i != 1) result = result ":" result = result sprintf("%02x", maca[i]) } return result } BEGIN { FS="=" c["lan_ifname"]="eth0.0" c["wan_ifname"]="eth0.1" c["vlan0ports"]="1 2 3 4 5*" c["vlan1ports"]="0 5" getline < "/proc/diag/model" model=$0 for (i = 0; i < 6; i++) { if (mac_check != "") mac_check = mac_check ":" mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]" } } ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) { nvram[$1] = $2 } END { if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) { c["wan_ifname"] = "" c["lan_ifname"] = "eth1" } if (model == "ASUS WL-330gE") { c["wan_ifname"] = "" c["lan_ifname"] = "eth0" c["vlan0ports"] = "" c["vlan1ports"] = "" } if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) { c["wan_ifname"] = "eth1" c["lan_ifname"] = "eth0" } if (model == "ASUS WL-500g Premium V2") { c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" } if (model == "Dell TrueMobile 2300") { c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" c["vlan0ports"] = "0 1 2 3 4 5u" c["vlan1ports"] = "" } if (model == "Dell TrueMobile 2300 v2") { c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" } if (nvram["boardtype"] == "bcm94710r4") { # Toshiba WRC-1000 c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" } if (nvram["boardtype"] == "wgt634u") { c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" } if (nvram["boardtype"] == "0x0467") { c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" } if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) { if (nvram["boardnum"] == "45") { # WL-500gP c["vlan0ports"] = "1 2 3 4 5*" c["vlan1ports"] = "0 5" } else { # Generic BCM94704 c["vlan0ports"] = "0 1 2 3 4 5u" c["vlan1ports"] = "" c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" # MAC addresses on 4704 tend to be screwed up. Add a workaround here if (nvram["et0macaddr"] ~ mac_check) { c["lan_macaddr"] = nvram["et0macaddr"] c["wan_macaddr"] = macinc(c["lan_macaddr"]) } } } # Buffalo WBR-B11 and Buffalo WBR-G54 if (nvram["boardtype"] == "bcm94710ap") { c["vlan0ports"] = "0 1 2 3 4 5u" c["vlan1ports"] = "" c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" } # generic broadcom 4705/4785 processor with 5397 switch? # EXCEPT Linksys WRT300N V1.1 if ((nvram["boardtype"] == "0x478") && \ (model != "Linksys WRT300N V1.1")) { c["vlan0ports"] = "1 2 3 4 8*" c["vlan1ports"] = "0 8" } # WAP54G if ((nvram["boardnum"] == "2") || \ (nvram["boardnum"] == "1024")) { c["lan_ifname"]="eth0" c["wan_ifname"]="" } # Sitecom WL-105b if ((nvram["boardum"] == "2") && \ (nvram["GemtekPmonVer"] == "1")) { c["lan_ifname"]="eth0" c["wan_ifname"]="" } # ASUS WL-700gE # These are actually same as defaults above. For some reason this script applies # Generic BCM94704 settings instead so we revert to proper settings here. # Hopefully someone will fix this properly soon. if (model == "ASUS WL-700gE") { c["lan_ifname"]="eth0.0" c["wan_ifname"]="eth0.1" c["vlan0ports"]="1 2 3 4 5*" c["vlan1ports"]="0 5" } if (model == "Motorola WR850G V2/V3") { c["vlan0ports"]="0 1 2 3 5*" c["vlan1ports"]="4 5" } if (model == "ASUS WL-500W") { c["lan_ifname"] = "eth0" c["wan_ifname"] = "eth1" c["vlan0ports"] = "0 1 2 3 4 5u" c["vlan1ports"] = "" } if (model == "OvisLink WL-1600GL") { c["lan_ifname"] = "eth0.0" c["wan_ifname"] = "eth0.1" c["vlan0ports"] = "0 1 2 3 5*" c["vlan1ports"] = "4 5" } if (c["vlan0ports"] || c["vlan1ports"]) { print "#### VLAN configuration " print "config switch eth0" print " option enable 1" print "" vlan(0, "vlan0ports") vlan(1, "vlan1ports") } print "#### Loopback configuration" print "config interface loopback" print " option ifname \"lo\"" print " option proto static" print " option ipaddr 127.0.0.1" print " option netmask 255.0.0.0" print "" print "" print "#### LAN configuration" print "config interface lan" print " option type bridge" p("ifname", "lan_ifname") p("macaddr", "lan_macaddr") print " option proto static" print " option ipaddr 192.168.1.1" print " option netmask 255.255.255.0" print "" print "" if (c["wan_ifname"]) { print "#### WAN configuration" print "config interface wan" p("ifname", "wan_ifname") p("macaddr", "wan_macaddr") print " option proto dhcp" } else { print "#### WAN configuration (disabled)" print "#config interface wan" print "# option proto dhcp" } }' > /etc/config/network }