+++ /dev/null
-# Makefile for to build the base openwrt
-#
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-######################################################################
-#
-# WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING!
-#
-# Currently the dependencies are not all handled. But that's true of
-# our buildroot in general, since it wasn't really set up for end users.
-
-OPENWRT_TARGETS:= $(STAGING_DIR)/bin/sstrip gcc3_3 openwrt-linux openwrt-kmodules.tar.bz2 \
- openwrt-shared openwrt-mtd openwrt-nvram openwrt-wlconf \
- bridge dnsmasq1 iptables wtools busybox \
- openwrt-rootprep
-
-.PHONY: $(OPENWRT_TARGETS) openwrt-code.bin
-
-openwrt-base: $(OPENWRT_TARGETS)
-
-######################################################################
-
-WRT54G_SOURCE=wrt54gs.2.07.1.tgz
-WRT54G_SITE=http://www.linksys.com/support/opensourcecode/wrt54gs/2.07.1
-WRT54G_DIR=$(BUILD_DIR)/WRT54GS
-
-LINUX_DIR=$(WRT54G_DIR)/release/src/linux/linux
-LINUX_FORMAT=zImage
-LINUX_BINLOC=arch/mips/brcm-boards/bcm947xx/compressed/vmlinuz
-
-TARGET_MODULES_DIR:=$(TARGET_DIR)/lib/modules/2.4.20
-
-$(LINUX_DIR)/.unpacked: $(WRT54G_DIR)/.prepared
- -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
- touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_DIR)/.patched: $(WRT54G_DIR)/.prepared
- $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR)/openwrt/kernel/patches
- # use replacement diag module code
- cp -f $(SOURCE_DIR)/openwrt/kernel/diag.c $(LINUX_DIR)/drivers/net/diag/diag_led.c
- cp -f $(SOURCE_DIR)/openwrt/kernel/linux.config $(LINUX_DIR)/.config
- -(cd $(BUILD_DIR); ln -sf $(LINUX_DIR) linux)
- -(cd $(LINUX_DIR)/arch/mips/brcm-boards/bcm947xx/; \
- rm -rf compressed; \
- tar jxvf $(SOURCE_DIR)/openwrt/kernel/compressed-20040531.tar.bz2; \
- )
- touch $(LINUX_DIR)/.patched
-
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.nf-patched $(LINUX_DIR)/.patched $(LINUX_DIR)/.bbc-patched
- $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/Makefile
- $(SED) "s,^CROSS_COMPILE.*,CROSS_COMPILE=$(KERNEL_CROSS),g;" $(LINUX_DIR)/arch/mips/Makefile
- $(SED) "s,\-mcpu=,\-mtune=,g;" $(LINUX_DIR)/arch/mips/Makefile
- make -C $(LINUX_DIR) oldconfig include/linux/version.h
- touch $(LINUX_DIR)/.configured
-
-$(LINUX_DIR)/.depend_done: $(LINUX_DIR)/.configured $(GCC_BUILD_DIR2)/.installed
- $(MAKE) -C $(LINUX_DIR) dep
- touch $(LINUX_DIR)/.depend_done
-
-$(LINUX_DIR)/$(LINUX_BINLOC): $(LINUX_DIR)/.depend_done
- $(MAKE) -C $(LINUX_DIR) $(LINUX_FORMAT)
-
-openwrt-kmodules.tar.bz2: $(LINUX_DIR)/$(LINUX_BINLOC)
- $(MAKE) -C $(LINUX_DIR) modules
- $(MAKE) -C $(LINUX_DIR) DEPMOD=true \
- INSTALL_MOD_PATH=$(LINUX_DIR)/modules modules_install
- tar -C $(LINUX_DIR)/modules/lib -cjf openwrt-kmodules.tar.bz2 modules
-
-openwrt-linux: $(LINUX_DIR)/$(LINUX_BINLOC)
-
-$(DL_DIR)/$(WRT54G_SOURCE):
- $(WGET) -P $(DL_DIR) $(WRT54G_SITE)/$(WRT54G_SOURCE)
-
-$(WRT54G_DIR)/.source: $(DL_DIR)/$(WRT54G_SOURCE)
- zcat $(DL_DIR)/$(WRT54G_SOURCE) | tar -C $(BUILD_DIR) -xvf - WRT54GS/README.TXT WRT54GS/release
- touch $(WRT54G_DIR)/.source
-
-$(WRT54G_DIR)/.prepared: $(WRT54G_DIR)/.source
- $(SOURCE_DIR)/patch-kernel.sh $(WRT54G_DIR) $(SOURCE_DIR)/openwrt/patches
- touch $(WRT54G_DIR)/.prepared
-
-######################################################################
-
-OPENWRT_ROOT_SKEL:=root.tar.gz
-OPENWRT_SITE=http://openwrt.ksilebo.net/cgi-bin/viewcvs.cgi/root
-
-$(DL_DIR)/$(OPENWRT_ROOT_SKEL):
- $(WGET) -P $(DL_DIR) $(OPENWRT_SITE)/$(OPENWRT_ROOT_SKEL)
-
-######################################################################
-
-OPENWRT_SRCBASE:=$(WRT54G_DIR)/release/src
-OPENWRT_SHARED_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/shared
-OPENWRT_SHARED_TARGET_BINARY:=usr/lib/libshared.so
-
-$(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY): $(WRT54G_DIR)/.source
- $(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) -f Makefile-openwrt \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \
- install
-
-openwrt-shared: $(TARGET_DIR)/$(OPENWRT_SHARED_TARGET_BINARY)
-
-openwrt-shared-clean:
- -$(MAKE) -C $(OPENWRT_SHARED_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_NVRAM_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/nvram
-OPENWRT_NVRAM_TARGET_BINARY:=usr/sbin/nvram
-
-$(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY): $(WRT54G_DIR)/.source
- $(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/include -Wall -DOPENWRT_NVRAM" \
- install
-
-
-openwrt-nvram: $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY)
-
-openwrt-nvram-clean:
- -$(MAKE) -C $(OPENWRT_NVRAM_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_MTD_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/rc
-OPENWRT_MTD_TARGET_BINARY:=sbin/mtd
-
-$(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY): $(WRT54G_DIR)/.source $(TARGET_DIR)/$(OPENWRT_NVRAM_TARGET_BINARY) # need libnvram
- $(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) -f Makefile-openwrt \
- TOP=$(OPENWRT_SRCBASE)/router \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall -I$(OPENWRT_SRCBASE)/" \
- install
-
-openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
-
-openwrt-mtd-clean:
- -$(MAKE) -C $(OPENWRT_MTD_BUILD_DIR) clean
-
-######################################################################
-
-OPENWRT_WLCONF_BUILD_DIR:=$(OPENWRT_SRCBASE)/router/wlconf
-OPENWRT_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
-
-$(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY): $(WRT54G_DIR)/.source
- $(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) \
- TOP=$(OPENWRT_SRCBASE)/router \
- SRCBASE=$(OPENWRT_SRCBASE) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(OPENWRT_SRCBASE)/router/shared -I$(OPENWRT_SRCBASE)/include -Wall" \
- install
-
-
-openwrt-wlconf: $(TARGET_DIR)/$(OPENWRT_WLCONF_TARGET_BINARY)
-
-openwrt-wlconf-clean:
- -$(MAKE) -C $(OPENWRT_WLCONF_BUILD_DIR) clean
-
-######################################################################
-
-openwrt-rootprep:
- # tmp
- mkdir -p $(TARGET_DIR)/tmp
- chmod a+rwxt $(TARGET_DIR)/tmp
- ln -sf /tmp $(TARGET_DIR)/var
- rm -f $(TARGET_DIR)/usr/tmp
- ln -sf ../tmp $(TARGET_DIR)/usr/tmp
- # dev
- mkdir -p $(TARGET_DIR)/dev
- # etc
- mkdir -p $(TARGET_DIR)/etc
- ln -sf /tmp/resolv.conf $(TARGET_DIR)/etc/resolv.conf
- # miscellaneous
- mkdir -p $(TARGET_DIR)/mnt
- mkdir -p $(TARGET_DIR)/proc
- mkdir -p $(TARGET_DIR)/jffs
- mkdir -p $(TARGET_DIR)/rom
- # modules
- mkdir -p $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/wl/wl.o $(TARGET_MODULES_DIR)
- #cp $(LINUX_DIR)/drivers/net/et.4702/et.4702.o $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/et/et.o $(TARGET_MODULES_DIR)
- cp $(LINUX_DIR)/drivers/net/diag/diag.o $(TARGET_MODULES_DIR)
-
-######################################################################
-
-openwrt-prune: openwrt-base
- # remove unneeded uClibc libs
- rm -rf $(TARGET_DIR)/lib/libthread_db*
- rm -rf $(TARGET_DIR)/lib/libpthread*
- # remove unneeded uClibc utils
- rm -f $(TARGET_DIR)/sbin/ldconfig
- rm -f $(TARGET_DIR)/usr/bin/ldd
- # remove other unneeded files
- rm -f $(TARGET_DIR)/usr/sbin/iptables-save
- rm -f $(TARGET_DIR)/usr/sbin/iptables-restore
- rm -f $(TARGET_DIR)/usr/sbin/ip6tables
- rm -f $(TARGET_DIR)/usr/lib/iptables/libip6*
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STAGING_DIR)/bin/sstrip 2>/dev/null || true;
-
-######################################################################
-
-$(STAGING_DIR)/bin/sstrip:
- $(CC) -o $(STAGING_DIR)/bin/sstrip $(SOURCE_DIR)/openwrt/tools/sstrip.c
-
-wrt-tools:
- $(CC) -o $(WRT54G_DIR)/release/tools/trx $(SOURCE_DIR)/openwrt/tools/trx.c
- $(CC) -o $(WRT54G_DIR)/release/tools/addpattern $(SOURCE_DIR)/openwrt/tools/addpattern.c
-
-openwrt-linux.trx: openwrt-prune squashfsroot wrt-tools
- $(WRT54G_DIR)/release/tools/trx -o openwrt-linux.trx \
- $(LINUX_DIR)/$(LINUX_BINLOC) $(IMAGE)
-
-openwrt-gs-code.bin: openwrt-linux.trx
- $(WRT54G_DIR)/release/tools/addpattern -i openwrt-linux.trx \
- -o openwrt-gs-code.bin -g
-
-openwrt-g-code.bin: openwrt-gs-code.bin
- sed -e "1s,^W54S,W54G," < openwrt-gs-code.bin > openwrt-g-code.bin
-
-openwrt-code.bin: openwrt-gs-code.bin openwrt-g-code.bin
-
-######################################################################
projects / openwrt / svn-archive / archive.git / blobdiff