removed the old directories, too.. cleanup is ready, yay

[openwrt/svn-archive/archive.git] / obsolete-buildroot / sources / openwrt / kernel / diag.c

diff --git a/obsolete-buildroot/sources/openwrt/kernel/diag.c b/obsolete-buildroot/sources/openwrt/kernel/diag.c
deleted file mode 100644 (file)
index 41cb17b..0000000
--- a/obsolete-buildroot/sources/openwrt/kernel/diag.c
+++ /dev/null
@@ -1,210 +0,0 @@
-// replacement diag module
-// (c) 2004 openwrt 
-// mbm at alt dot org
-//
-// initial release 2004/03/28
-//
-// 2004/08/26 asus & buffalo support added
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <asm/io.h>
-#include <typedefs.h>
-#include <bcm4710.h>
-#include <sbutils.h>
-
-extern char * nvram_get(const char *name);
-static void *sbh;
-
-// v2.x - - - - -
-#define DIAG_GPIO (1<<1)
-#define DMZ_GPIO  (1<<7)
-
-static void set_gpio(uint32 mask, uint32 value) {
-       sb_gpiocontrol(sbh,mask,0);
-       sb_gpioouten(sbh,mask,mask);
-       sb_gpioout(sbh,mask,value);
-}
-
-static void v2_set_diag(u8 state) {
-       set_gpio(DIAG_GPIO,state);
-}
-static void v2_set_dmz(u8 state) {
-       set_gpio(DMZ_GPIO,state);
-}
-
-// v1.x - - - - -
-#define LED_DIAG   0x13
-#define LED_DMZ    0x12
-
-static void v1_set_diag(u8 state) {
-       if (!state) {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
-       } else {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
-       }
-}
-static void v1_set_dmz(u8 state) {
-       if (!state) {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
-       } else {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
-       }
-}
-
-// - - - - -
-static void ignore(u8 ignored) {};
-
-// - - - - -
-#define BIT_DMZ         0x01
-#define BIT_DIAG        0x04
-
-void (*set_diag)(u8 state);
-void (*set_dmz)(u8 state);
-
-static unsigned int diag = 0;
-
-static void diag_change()
-{
-       //printk(KERN_INFO "led -> %02x\n",diag);
-
-       set_diag(0xFF); // off
-       set_dmz(0xFF); // off
-
-       if(diag & BIT_DIAG)
-               set_diag(0x00); // on
-       if(diag & BIT_DMZ)
-               set_dmz(0x00); // on
-}
-
-static int proc_diag(ctl_table *table, int write, struct file *filp,
-               void *buffer, size_t *lenp)
-{
-       int r;
-       r = proc_dointvec(table, write, filp, buffer, lenp);
-       if (write && !r) {
-               diag_change();
-       }
-       return r;
-}
-
-// - - - - -
-static unsigned char reset_gpio = 0;
-static unsigned char reset_polarity = 0;
-static unsigned int reset = 0;
-
-static int proc_reset(ctl_table *table, int write, struct file *filp,
-               void *buffer, size_t *lenp)
-{
-
-       if (reset_gpio) {
-               sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-               sb_gpioouten(sbh,reset_gpio,0);
-               reset=!(sb_gpioin(sbh)&reset_gpio);
-
-               if (reset_polarity) reset=!reset;
-       } else {
-               reset=0;
-       }
-
-       return proc_dointvec(table, write, filp, buffer, lenp);
-}
-
-// - - - - -
-static struct ctl_table_header *diag_sysctl_header;
-
-static ctl_table sys_diag[] = {
-         { 
-          ctl_name: 2000,
-          procname: "diag", 
-          data: &diag,
-          maxlen: sizeof(diag), 
-          mode: 0644,
-          proc_handler: proc_diag
-        },
-        {
-          ctl_name: 2001,
-          procname: "reset",
-          data: &reset,
-          maxlen: sizeof(reset),
-          mode: 0444,
-          proc_handler: proc_reset 
-        },
-         { 0 }
-};
-
-static int __init diag_init()
-{
-       char *buf;
-       u32 board_type;
-       sbh = sb_kattach();
-       sb_gpiosetcore(sbh);
-
-       board_type = sb_boardtype(sbh);
-       printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-
-       set_diag=ignore;
-       set_dmz=ignore;
-       
-       if ((board_type & 0xf00) == 0x400) {
-               board_type=1;
-               buf=nvram_get("boardtype")?:"";
-               if (!strcmp(buf,"bcm94710dev")) {
-                       buf=nvram_get("boardnum")?:"";
-                       if (!strcmp(buf,"42")) {
-                               // wrt54g v1.x
-                               set_diag=v1_set_diag;
-                               set_dmz=v1_set_dmz;
-                               reset_gpio=(1<<6);
-                               reset_polarity=0;
-                       } else if (!strcmp(buf,"asusX")) {
-                               //asus wl-500g
-                               //no leds
-                               reset_gpio=(1<<6);
-                               reset_polarity=1;
-                       }
-               } else if (!strcmp(buf,"bcm94710ap")) {
-                       buf=nvram_get("boardnum")?:"";
-                       if (!strcmp(buf,"42")) {
-                               // buffalo
-                               set_dmz=v2_set_dmz;
-                               reset_gpio=(1<<4);
-                               reset_polarity=1;
-                       } else if (!strcmp(buf,"44")) {
-                               //dell truemobile
-                               set_dmz=v2_set_dmz;
-                               reset_gpio=(1<<0);
-                               reset_polarity=0;
-                       }
-               }
-       } else {
-               board_type=2;
-               set_diag=v2_set_diag;
-               set_dmz=v2_set_dmz;
-               reset_gpio=(1<<6);
-               reset_polarity=0;
-               buf=nvram_get("boardnum")?:"";
-               if (!strcmp(buf,"44")) {
-                       set_diag=ignore;
-                       set_dmz=ignore;
-                       reset_gpio=(1<<5);
-                       reset_polarity=0;
-               }
-       }
-       printk(KERN_INFO "using v%d hardware\n",board_type);
-
-       diag_sysctl_header = register_sysctl_table(sys_diag, 0);
-       diag_change();
-
-       return 0;
-}
-
-static void __exit diag_exit()
-{
-       unregister_sysctl_table(diag_sysctl_header);
-}
-
-module_init(diag_init);
-module_exit(diag_exit);