move old kamikaze out of trunk - will put buildroot-ng in there as soon as all the...

[openwrt/svn-archive/archive.git] / openwrt / docs / hardware / buffalo / wla2-g54l / dmesg-2_4_29.txt

diff --git a/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt b/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt
deleted file mode 100644 (file)
index a0c93c2..0000000
--- a/openwrt/docs/hardware/buffalo/wla2-g54l/dmesg-2_4_29.txt
+++ /dev/null
@@ -1,85 +0,0 @@
-CPU revision is: 00029007
-Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
-Primary data cache 4kB, 2-way, linesize 16 bytes.
-Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005
-Determined physical RAM map:
- memory: 01000000 @ 00000000 (usable)
-On node 0 totalpages: 4096
-zone(0): 4096 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
-CPU: BCM4712 rev 1 at 200 MHz
-Using 100.000 MHz high precision timer.
-Calibrating delay loop... 199.47 BogoMIPS
-Memory: 14096k/16384k available (1463k kernel code, 2288k reserved, 104k data, 88k init, 0k highmem)
-Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
-Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
-Mount cache hash table entries: 512 (order: 0, 4096 bytes)
-Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
-Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
-Checking for 'wait' instruction...  unavailable.
-POSIX conformance testing by UNIFIX
-PCI: Disabled
-PCI: Fixing up bus 0
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
-devfs: boot_options: 0x1
-JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
-Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
-pty: 256 Unix98 ptys configured
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-ttyS00 at 0xb8000300 (irq = 3) is a 16550A
-ttyS01 at 0xb8000400 (irq = 0) is a 16550A
-Software Watchdog Timer: 0.05, timer margin: 60 sec
-loop: loaded (max 8 devices)
-Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
-Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
-Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
-Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
-Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
-Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
-Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
- Amd/Fujitsu Extended Query Table v1.0 at 0x0040
-number of CFI chips: 1
-cfi_cmdset_0002: Disabling fast programming due to code brokenness.
-Flash device: 0x400000 at 0x1c000000
-Creating 4 MTD partitions on "Physically mapped flash":
-0x00000000-0x00040000 : "pmon"
-0x00040000-0x003f0000 : "linux"
-0x000f0000-0x003f0000 : "rootfs"
-0x003f0000-0x00400000 : "nvram"
-sflash: found no supported devices
-Initializing Cryptographic API
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 512 buckets, 4Kbytes
-TCP: Hash tables configured (established 1024 bind 2048)
-ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
-ip_tables: (C) 2000-2002 Netfilter core team
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-NET4: Ethernet Bridge 008 for NET4.0
-Bridge firewalling registered
-802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
-All bugs added by David S. Miller <davem@redhat.com>
-VFS: Mounted root (jffs2 filesystem) readonly.
-Mounted devfs on /dev
-Freeing unused kernel memory: 88k freed
-Algorithmics/MIPS FPU Emulator v1.5
-diag boardtype: 00000101
-using v2 hardware
-jffs2.bbc: SIZE compression mode activated.
-PCI: Setting latency timer of device 00:02.0 to 64
-5325E   phy=FFFFFFFF
-5325E   VLAN programming for BCM5325E-MDIO I/F switch
-eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
-PCI: Setting latency timer of device 00:01.0 to 64
-eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
-device eth0 entered promiscuous mode
-vlan0: add 01:00:5e:00:00:01 mcast address to master interface
-br0: port 1(vlan0) entering learning state
-br0: port 1(vlan0) entering forwarding state
-br0: topology change detected, propagating