+++ /dev/null
-# DO NOT EDIT. This file is generated from Config.src
-#
-# For a description of the syntax of this configuration file,
-# see scripts/kbuild/config-language.txt.
-#
-
-menu "Networking Utilities"
-
-config BUSYBOX_CONFIG_NAMEIF
- bool "nameif"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- select BUSYBOX_CONFIG_FEATURE_SYSLOG
- help
- nameif is used to rename network interface by its MAC address.
- Renamed interfaces MUST be in the down state.
- It is possible to use a file (default: /etc/mactab)
- with list of new interface names and MACs.
- Maximum interface name length: IFNAMSIZ = 16
- File fields are separated by space or tab.
- File format:
- # Comment
- new_interface_name XX:XX:XX:XX:XX:XX
-
-config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED
- bool "Extended nameif"
- default n
- depends on BUSYBOX_CONFIG_NAMEIF
- help
- This extends the nameif syntax to support the bus_info, driver,
- phyaddr selectors. The syntax is compatible to the normal nameif.
- File format:
- new_interface_name driver=asix bus=usb-0000:00:08.2-3
- new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5
- new_interface_name phy_address=2 00:80:C8:38:91:B5
- new_interface_name mac=00:80:C8:38:91:B5
- new_interface_name 00:80:C8:38:91:B5
-config BUSYBOX_CONFIG_NBDCLIENT
- bool "nbd-client"
- default n
- help
- Network block device client
-config BUSYBOX_CONFIG_NC
- bool "nc"
- default y
- help
- A simple Unix utility which reads and writes data across network
- connections.
-
-config BUSYBOX_CONFIG_NC_SERVER
- bool "Netcat server options (-l)"
- default n
- depends on BUSYBOX_CONFIG_NC
- help
- Allow netcat to act as a server.
-
-config BUSYBOX_CONFIG_NC_EXTRA
- bool "Netcat extensions (-eiw and filename)"
- default n
- depends on BUSYBOX_CONFIG_NC
- help
- Add -e (support for executing the rest of the command line after
- making or receiving a successful connection), -i (delay interval for
- lines sent), -w (timeout for initial connection).
-
-config BUSYBOX_CONFIG_NC_110_COMPAT
- bool "Netcat 1.10 compatibility (+2.5k)"
- default n # off specially for Rob
- depends on BUSYBOX_CONFIG_NC
- help
- This option makes nc closely follow original nc-1.10.
- The code is about 2.5k bigger. It enables
- -s ADDR, -n, -u, -v, -o FILE, -z options, but loses
- busybox-specific extensions: -f FILE and -ll.
-config BUSYBOX_CONFIG_PING
- bool "ping"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to
- elicit an ICMP ECHO_RESPONSE from a host or gateway.
-
-config BUSYBOX_CONFIG_PING6
- bool "ping6"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING
- help
- This will give you a ping that can talk IPv6.
-
-config BUSYBOX_CONFIG_FEATURE_FANCY_PING
- bool "Enable fancy ping output"
- default y
- depends on BUSYBOX_CONFIG_PING
- help
- Make the output from the ping applet include statistics, and at the
- same time provide full support for ICMP packets.
-config BUSYBOX_CONFIG_WHOIS
- bool "whois"
- default n
- help
- whois is a client for the whois directory service
-
-config BUSYBOX_CONFIG_FEATURE_IPV6
- bool "Enable IPv6 support"
- default IPV6
- help
- Enable IPv6 support in busybox.
- This adds IPv6 support in the networking applets.
-
-config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL
- bool "Enable Unix domain socket support (usually not needed)"
- default n
- help
- Enable Unix domain socket support in all busybox networking
- applets. Address of the form local:/path/to/unix/socket
- will be recognized.
-
- This extension is almost never used in real world usage.
- You most likely want to say N.
-
-config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS
- bool "Prefer IPv4 addresses from DNS queries"
- default y
- depends on BUSYBOX_CONFIG_FEATURE_IPV6
- help
- Use IPv4 address of network host if it has one.
-
- If this option is off, the first returned address will be used.
- This may cause problems when your DNS server is IPv6-capable and
- is returning IPv6 host addresses too. If IPv6 address
- precedes IPv4 one in DNS reply, busybox network applets
- (e.g. wget) will use IPv6 address. On an IPv6-incapable host
- or network applets will fail to connect to the host
- using IPv6 address.
-
-config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS
- bool "Verbose resolution errors"
- default y
- help
- Enable if you are not satisfied with simplistic
- "can't resolve 'hostname.com'" and want to know more.
- This may increase size of your executable a bit.
-
-config BUSYBOX_CONFIG_ARP
- bool "arp"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Manipulate the system ARP cache.
-
-config BUSYBOX_CONFIG_ARPING
- bool "arping"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Ping hosts by ARP packets.
-
-config BUSYBOX_CONFIG_BRCTL
- bool "brctl"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Manage ethernet bridges.
- Supports addbr/delbr and addif/delif.
-
-config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
- bool "Fancy options"
- default y
- depends on BUSYBOX_CONFIG_BRCTL
- help
- Add support for extended option like:
- setageing, setfd, sethello, setmaxage,
- setpathcost, setportprio, setbridgeprio,
- stp
- This adds about 600 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW
- bool "Support show"
- default y
- depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY
- help
- Add support for option which prints the current config:
- show
-
-config BUSYBOX_CONFIG_DNSD
- bool "dnsd"
- default n
- help
- Small and static DNS server daemon.
-
-config BUSYBOX_CONFIG_ETHER_WAKE
- bool "ether-wake"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Send a magic packet to wake up sleeping machines.
-
-config BUSYBOX_CONFIG_FAKEIDENTD
- bool "fakeidentd"
- default n
- select BUSYBOX_CONFIG_FEATURE_SYSLOG
- help
- fakeidentd listens on the ident port and returns a predefined
- fake value on any query.
-
-config BUSYBOX_CONFIG_FTPD
- bool "ftpd"
- default n
- help
- simple FTP daemon. You have to run it via inetd.
-
-config BUSYBOX_CONFIG_FEATURE_FTP_WRITE
- bool "Enable upload commands"
- default n
- depends on BUSYBOX_CONFIG_FTPD
- help
- Enable all kinds of FTP upload commands (-w option)
-
-config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST
- bool "Enable workaround for RFC-violating clients"
- default n
- depends on BUSYBOX_CONFIG_FTPD
- help
- Some ftp clients (among them KDE's Konqueror) issue illegal
- "LIST -l" requests. This option works around such problems.
- It might prevent you from listing files starting with "-" and
- it increases the code size by ~40 bytes.
- Most other ftp servers seem to behave similar to this.
-
-config BUSYBOX_CONFIG_FTPGET
- bool "ftpget"
- default n
- help
- Retrieve a remote file via FTP.
-
-config BUSYBOX_CONFIG_FTPPUT
- bool "ftpput"
- default n
- help
- Store a remote file via FTP.
-
-config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS
- bool "Enable long options in ftpget/ftpput"
- default n
- depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT)
- help
- Support long options for the ftpget/ftpput applet.
-
-config BUSYBOX_CONFIG_HOSTNAME
- bool "hostname"
- default n
- help
- Show or set the system's host name.
-
-config BUSYBOX_CONFIG_HTTPD
- bool "httpd"
- default n
- help
- Serve web pages via an HTTP server.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
- bool "Support 'Ranges:' header"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- Makes httpd emit "Accept-Ranges: bytes" header and understand
- "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted
- downloads, seeking in multimedia players etc.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE
- bool "Use sendfile system call"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- When enabled, httpd will use the kernel sendfile() function
- instead of read/write loop.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID
- bool "Enable -u <user> option"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows the server to run as a specific user
- rather than defaulting to the user that starts the server.
- Use of this option requires special privileges to change to a
- different user.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- bool "Enable Basic http Authentication"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- Utilizes password settings from /etc/httpd.conf for basic
- authentication on a per url basis.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5
- bool "Support MD5 crypted passwords for http Authentication"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH
- help
- Enables basic per URL authentication from /etc/httpd.conf
- using md5 passwords.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- bool "Support Common Gateway Interface (CGI)"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows scripts and executables to be invoked
- when specific URLs are requested.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR
- bool "Support for running scripts through an interpreter"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- help
- This option enables support for running scripts through an
- interpreter. Turn this on if you want PHP scripts to work
- properly. You need to supply an additional line in your httpd
- config file:
- *.php:/path/to/your/php
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV
- bool "Set REMOTE_PORT environment variable for CGI"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI
- help
- Use of this option can assist scripts in generating
- references that contain a unique port number.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR
- bool "Enable -e option (useful for CGIs written as shell scripts)"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows html encoding of arbitrary strings for display
- by the browser. Output goes to stdout.
- For example, httpd -e "<Hello World>" produces
- "<Hello World>".
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES
- bool "Support for custom error pages"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows you to define custom error pages in
- the configuration file instead of the default HTTP status
- error pages. For instance, if you add the line:
- E404:/path/e404.html
- in the config file, the server will respond the specified
- '/path/e404.html' file instead of the terse '404 NOT FOUND'
- message.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY
- bool "Support for reverse proxy"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- This option allows you to define URLs that will be forwarded
- to another HTTP server. To setup add the following line to the
- configuration file
- P:/url/:http://hostname[:port]/new/path/
- Then a request to /url/myfile will be forwarded to
- http://hostname[:port]/new/path/myfile.
-
-config BUSYBOX_CONFIG_FEATURE_HTTPD_GZIP
- bool "Support for GZIP content encoding"
- default n
- depends on BUSYBOX_CONFIG_HTTPD
- help
- Makes httpd send files using GZIP content encoding if the
- client supports it and a pre-compressed <file>.gz exists.
-
-config BUSYBOX_CONFIG_IFCONFIG
- bool "ifconfig"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Ifconfig is used to configure the kernel-resident network interfaces.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS
- bool "Enable status reporting output (+7k)"
- default y
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- If ifconfig is called with no arguments it will display the status
- of the currently active interfaces.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP
- bool "Enable slip-specific options \"keepalive\" and \"outfill\""
- default n
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Allow "keepalive" and "outfill" support for SLIP. If you're not
- planning on using serial lines, leave this unchecked.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ
- bool "Enable options \"mem_start\", \"io_addr\", and \"irq\""
- default n
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Allow the start address for shared memory, start address for I/O,
- and/or the interrupt line used by the specified device.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW
- bool "Enable option \"hw\" (ether only)"
- default y
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Set the hardware address of this interface, if the device driver
- supports this operation. Currently, we only support the 'ether'
- class.
-
-config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS
- bool "Set the broadcast automatically"
- default y
- depends on BUSYBOX_CONFIG_IFCONFIG
- help
- Setting this will make ifconfig attempt to find the broadcast
- automatically if the value '+' is used.
-
-config BUSYBOX_CONFIG_IFENSLAVE
- bool "ifenslave"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Userspace application to bind several interfaces
- to a logical interface (use with kernel bonding driver).
-
-config BUSYBOX_CONFIG_IFPLUGD
- bool "ifplugd"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Network interface plug detection daemon.
-
-config BUSYBOX_CONFIG_IFUPDOWN
- bool "ifupdown"
- default n
- help
- Activate or deactivate the specified interfaces. This applet makes
- use of either "ifconfig" and "route" or the "ip" command to actually
- configure network interfaces. Therefore, you will probably also want
- to enable either IFCONFIG and ROUTE, or enable
- FEATURE_IFUPDOWN_IP and the various IP options. Of
- course you could use non-busybox versions of these programs, so
- against my better judgement (since this will surely result in plenty
- of support questions on the mailing list), I do not force you to
- enable these additional options. It is up to you to supply either
- "ifconfig", "route" and "run-parts" or the "ip" command, either
- via busybox or via standalone utilities.
-
-config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH
- string "Absolute path to ifstate file"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- ifupdown keeps state information in a file called ifstate.
- Typically it is located in /var/run/ifstate, however
- some distributions tend to put it in other places
- (debian, for example, uses /etc/network/run/ifstate).
- This config option defines location of ifstate.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
- bool "Use ip applet"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- Use the iproute "ip" command to implement "ifup" and "ifdown", rather
- than the default of using the older 'ifconfig' and 'route' utilities.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN
- bool "Use busybox ip applet"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- select BUSYBOX_CONFIG_IP
- select BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- select BUSYBOX_CONFIG_FEATURE_IP_LINK
- select BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- help
- Use the busybox iproute "ip" applet to implement "ifupdown".
-
- If left disabled, you must install the full-blown iproute2
- utility or the "ifup" and "ifdown" applets will not work.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN
- bool "Use busybox ifconfig and route applets"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP
- select BUSYBOX_CONFIG_IFCONFIG
- select BUSYBOX_CONFIG_ROUTE
- help
- Use the busybox iproute "ifconfig" and "route" applets to
- implement the "ifup" and "ifdown" utilities.
-
- If left disabled, you must install the full-blown ifconfig
- and route utilities, or the "ifup" and "ifdown" applets will not
- work.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4
- bool "Support for IPv4"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- If you want ifup/ifdown to talk IPv4, leave this on.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6
- bool "Support for IPv6"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6
- help
- If you need support for IPv6, turn this option on.
-
-### UNUSED
-###config FEATURE_IFUPDOWN_IPX
-### bool "Support for IPX"
-### default y
-### depends on IFUPDOWN
-### help
-### If this option is selected you can use busybox to work with IPX
-### networks.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING
- bool "Enable mapping support"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- This enables support for the "mapping" stanza, unless you have
- a weird network setup you don't need it.
-
-config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP
- bool "Support for external dhcp clients"
- default n
- depends on BUSYBOX_CONFIG_IFUPDOWN
- help
- This enables support for the external dhcp clients. Clients are
- tried in the following order: dhcpcd, dhclient, pump and udhcpc.
- Otherwise, if udhcpc applet is enabled, it is used.
- Otherwise, ifup/ifdown will have no support for DHCP.
-
-config BUSYBOX_CONFIG_INETD
- bool "inetd"
- default n
- select BUSYBOX_CONFIG_FEATURE_SYSLOG
- help
- Internet superserver daemon
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO
- bool "Support echo service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Echo received data internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD
- bool "Support discard service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Internet /dev/null internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME
- bool "Support time service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Return 32 bit time since 1900 internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME
- bool "Support daytime service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Return human-readable time internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN
- bool "Support chargen service"
- default n
- depends on BUSYBOX_CONFIG_INETD
- help
- Familiar character generator internal inetd service
-
-config BUSYBOX_CONFIG_FEATURE_INETD_RPC
- bool "Support RPC services"
- default n
- depends on BUSYBOX_CONFIG_INETD
- select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
- help
- Support Sun-RPC based services
-
-config BUSYBOX_CONFIG_IP
- bool "ip"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The "ip" applet is a TCP/IP interface configuration and routing
- utility. You generally don't need "ip" to use busybox with
- TCP/IP.
-
-config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
- bool "ip address"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Address manipulation support for the "ip" applet.
-
-config BUSYBOX_CONFIG_FEATURE_IP_LINK
- bool "ip link"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Configure network devices with "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_ROUTE
- bool "ip route"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for routing table management to "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
- bool "ip tunnel"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for tunneling commands to "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_RULE
- bool "ip rule"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Add support for rule commands to "ip".
-
-config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS
- bool "Support short forms of ip commands"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- Also support short-form of ip <OBJECT> commands:
- ip addr -> ipaddr
- ip link -> iplink
- ip route -> iproute
- ip tunnel -> iptunnel
- ip rule -> iprule
-
- Say N unless you desparately need the short form of the ip
- object commands.
-
-config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS
- bool "Support displaying rarely used link types"
- default n
- depends on BUSYBOX_CONFIG_IP
- help
- If you are not going to use links of type "frad", "econet",
- "bif" etc, you probably don't need to enable this.
- Ethernet, wireless, infrared, ppp/slip, ip tunnelling
- link types are supported without this option selected.
-
-config BUSYBOX_CONFIG_IPADDR
- bool
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS
-
-config BUSYBOX_CONFIG_IPLINK
- bool
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK
-
-config BUSYBOX_CONFIG_IPROUTE
- bool
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE
-
-config BUSYBOX_CONFIG_IPTUNNEL
- bool
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL
-
-config BUSYBOX_CONFIG_IPRULE
- bool
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE
-
-config BUSYBOX_CONFIG_IPCALC
- bool "ipcalc"
- default n
- help
- ipcalc takes an IP address and netmask and calculates the
- resulting broadcast, network, and host range.
-
-config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY
- bool "Fancy IPCALC, more options, adds 1 kbyte"
- default n
- depends on BUSYBOX_CONFIG_IPCALC
- help
- Adds the options hostname, prefix and silent to the output of
- "ipcalc".
-
-config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS
- bool "Enable long options"
- default n
- depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS
- help
- Support long options for the ipcalc applet.
-
-config BUSYBOX_CONFIG_NETMSG
- bool "netmsg"
- default y
- help
- simple program for sending udp broadcast messages
-
-config BUSYBOX_CONFIG_NETSTAT
- bool "netstat"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- netstat prints information about the Linux networking subsystem.
-
-config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE
- bool "Enable wide netstat output"
- default y
- depends on BUSYBOX_CONFIG_NETSTAT
- help
- Add support for wide columns. Useful when displaying IPv6 addresses
- (-W option).
-
-config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG
- bool "Enable PID/Program name output"
- default y
- depends on BUSYBOX_CONFIG_NETSTAT
- help
- Add support for -p flag to print out PID and program name.
- +700 bytes of code.
-
-config BUSYBOX_CONFIG_NSLOOKUP
- bool "nslookup"
- default y
- help
- nslookup is a tool to query Internet name servers.
-
-config BUSYBOX_CONFIG_NTPD
- bool "ntpd"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- The NTP client/server daemon.
-
-config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER
- bool "Make ntpd usable as a NTP server"
- default y
- depends on BUSYBOX_CONFIG_NTPD
- help
- Make ntpd usable as a NTP server. If you disable this option
- ntpd will be usable only as a NTP client.
-
-config BUSYBOX_CONFIG_PSCAN
- bool "pscan"
- default n
- help
- Simple network port scanner.
-
-config BUSYBOX_CONFIG_ROUTE
- bool "route"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Route displays or manipulates the kernel's IP routing tables.
-
-config BUSYBOX_CONFIG_SLATTACH
- bool "slattach"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- slattach is a small utility to attach network interfaces to serial
- lines.
-
-#config TC
-# bool "tc"
-# default y
-# help
-# show / manipulate traffic control settings
-#
-#config FEATURE_TC_INGRESS
-# def_bool n
-# depends on TC
-
-config BUSYBOX_CONFIG_TCPSVD
- bool "tcpsvd"
- default n
- help
- tcpsvd listens on a TCP port and runs a program for each new
- connection.
-
-config BUSYBOX_CONFIG_TELNET
- bool "telnet"
- default y
- help
- Telnet is an interface to the TELNET protocol, but is also commonly
- used to test other simple protocols.
-
-config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE
- bool "Pass TERM type to remote host"
- default y
- depends on BUSYBOX_CONFIG_TELNET
- help
- Setting this option will forward the TERM environment variable to the
- remote host you are connecting to. This is useful to make sure that
- things like ANSI colors and other control sequences behave.
-
-config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN
- bool "Pass USER type to remote host"
- default n
- depends on BUSYBOX_CONFIG_TELNET
- help
- Setting this option will forward the USER environment variable to the
- remote host you are connecting to. This is useful when you need to
- log into a machine without telling the username (autologin). This
- option enables `-a' and `-l USER' arguments.
-
-config BUSYBOX_CONFIG_TELNETD
- bool "telnetd"
- default y
- select BUSYBOX_CONFIG_FEATURE_SYSLOG
- help
- A daemon for the TELNET protocol, allowing you to log onto the host
- running the daemon. Please keep in mind that the TELNET protocol
- sends passwords in plain text. If you can't afford the space for an
- SSH daemon and you trust your network, you may say 'y' here. As a
- more secure alternative, you should seriously consider installing the
- very small Dropbear SSH daemon instead:
- http://matt.ucc.asn.au/dropbear/dropbear.html
-
- Note that for busybox telnetd to work you need several things:
- First of all, your kernel needs:
- UNIX98_PTYS=y
- DEVPTS_FS=y
-
- Next, you need a /dev/pts directory on your root filesystem:
-
- $ ls -ld /dev/pts
- drwxr-xr-x 2 root root 0 Sep 23 13:21 /dev/pts/
-
- Next you need the pseudo terminal master multiplexer /dev/ptmx:
-
- $ ls -la /dev/ptmx
- crw-rw-rw- 1 root tty 5, 2 Sep 23 13:55 /dev/ptmx
-
- Any /dev/ttyp[0-9]* files you may have can be removed.
- Next, you need to mount the devpts filesystem on /dev/pts using:
-
- mount -t devpts devpts /dev/pts
-
- You need to be sure that busybox has LOGIN and
- FEATURE_SUID enabled. And finally, you should make
- certain that Busybox has been installed setuid root:
-
- chown root.root /bin/busybox
- chmod 4755 /bin/busybox
-
- with all that done, telnetd _should_ work....
-
-
-config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
- bool "Support standalone telnetd (not inetd only)"
- default y
- depends on BUSYBOX_CONFIG_TELNETD
- help
- Selecting this will make telnetd able to run standalone.
-
-config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
- bool "Support -w SEC option (inetd wait mode)"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
- help
- This option allows you to run telnetd in "inet wait" mode.
- Example inetd.conf line (note "wait", not usual "nowait"):
-
- telnet stream tcp wait root /bin/telnetd telnetd -w10
-
- In this example, inetd passes _listening_ socket_ as fd 0
- to telnetd when connection appears.
- telnetd will wait for connections until all existing
- connections are closed, and no new connections
- appear during 10 seconds. Then it exits, and inetd continues
- to listen for new connections.
-
- This option is rarely used. "tcp nowait" is much more usual
- way of running tcp services, including telnetd.
- You most probably want to say N here.
-
-config BUSYBOX_CONFIG_TFTP
- bool "tftp"
- default n
- help
- This enables the Trivial File Transfer Protocol client program. TFTP
- is usually used for simple, small transfers such as a root image
- for a network-enabled bootloader.
-
-config BUSYBOX_CONFIG_TFTPD
- bool "tftpd"
- default n
- help
- This enables the Trivial File Transfer Protocol server program.
- It expects that stdin is a datagram socket and a packet
- is already pending on it. It will exit after one transfer.
- In other words: it should be run from inetd in nowait mode,
- or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR"
-
-comment "Common options for tftp/tftpd"
- depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_GET
- bool "Enable 'tftp get' and/or tftpd upload code"
- default n
- depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
- help
- Add support for the GET command within the TFTP client. This allows
- a client to retrieve a file from a TFTP server.
- Also enable upload support in tftpd, if tftpd is selected.
-
- Note: this option does _not_ make tftpd capable of download
- (the usual operation people need from it)!
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_PUT
- bool "Enable 'tftp put' and/or tftpd download code"
- default n
- depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
- help
- Add support for the PUT command within the TFTP client. This allows
- a client to transfer a file to a TFTP server.
- Also enable download support in tftpd, if tftpd is selected.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
- bool "Enable 'blksize' and 'tsize' protocol options"
- default n
- depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
- help
- Allow tftp to specify block size, and tftpd to understand
- "blksize" and "tsize" options.
-
-config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR
- bool "Enable tftp progress meter"
- default n
- depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE
- help
- Show progress bar.
-
-config BUSYBOX_CONFIG_TFTP_DEBUG
- bool "Enable debug"
- default n
- depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD
- help
- Make tftp[d] print debugging messages on stderr.
- This is useful if you are diagnosing a bug in tftp[d].
-
-config BUSYBOX_CONFIG_TRACEROUTE
- bool "traceroute"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Utility to trace the route of IP packets.
-
-config BUSYBOX_CONFIG_TRACEROUTE6
- bool "traceroute6"
- default n
- depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE
- help
- Utility to trace the route of IPv6 packets.
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE
- bool "Enable verbose output"
- default y
- depends on BUSYBOX_CONFIG_TRACEROUTE
- help
- Add some verbosity to traceroute. This includes among other things
- hostnames and ICMP response types.
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE
- bool "Enable loose source route"
- default n
- depends on BUSYBOX_CONFIG_TRACEROUTE
- help
- Add option to specify a loose source route gateway
- (8 maximum).
-
-config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP
- bool "Use ICMP instead of UDP"
- default n
- depends on BUSYBOX_CONFIG_TRACEROUTE
- help
- Add option -I to use ICMP ECHO instead of UDP datagrams.
-
-config BUSYBOX_CONFIG_TUNCTL
- bool "tunctl"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- tunctl creates or deletes tun devices.
-
-config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG
- bool "Support owner:group assignment"
- default n
- depends on BUSYBOX_CONFIG_TUNCTL
- help
- Allow to specify owner and group of newly created interface.
- 340 bytes of pure bloat. Say no here.
-
-source package/busybox/config/networking/udhcp/Config.in
-
-config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS
- string "ifup udhcpc command line options"
- default "-R -n"
- depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC
- help
- Command line options to pass to udhcpc from ifup.
- Intended to alter options not available in /etc/network/interfaces.
- (IE: --syslog --background etc...)
-
-config BUSYBOX_CONFIG_UDPSVD
- bool "udpsvd"
- default n
- help
- udpsvd listens on an UDP port and runs a program for each new
- connection.
-
-config BUSYBOX_CONFIG_VCONFIG
- bool "vconfig"
- default y
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- help
- Creates, removes, and configures VLAN interfaces
-
-config BUSYBOX_CONFIG_WGET
- bool "wget"
- default y
- help
- wget is a utility for non-interactive download of files from HTTP,
- HTTPS, and FTP servers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR
- bool "Enable a nifty process meter (+2k)"
- default y
- depends on BUSYBOX_CONFIG_WGET
- help
- Enable the transfer progress bar for wget transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION
- bool "Enable HTTP authentication"
- default y
- depends on BUSYBOX_CONFIG_WGET
- help
- Support authenticated HTTP transfers.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS
- bool "Enable long options"
- default y
- depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS
- help
- Support long options for the wget applet.
-
-config BUSYBOX_CONFIG_FEATURE_WGET_TIMEOUT
- bool "Enable read timeout option -T SEC"
- default n
- depends on BUSYBOX_CONFIG_WGET
- help
- Supports network read timeout for wget, so that wget will give
- up and timeout when reading network data, through the -T command
- line option. Currently only network data read timeout is
- supported (i.e., timeout is not applied to the DNS nor TCP
- connection initialization). When FEATURE_WGET_LONG_OPTIONS is
- also enabled, the --timeout option will work in addition to -T.
-
-config BUSYBOX_CONFIG_ZCIP
- bool "zcip"
- default n
- select BUSYBOX_CONFIG_PLATFORM_LINUX
- select BUSYBOX_CONFIG_FEATURE_SYSLOG
- help
- ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927.
- It's a daemon that allocates and defends a dynamically assigned
- address on the 169.254/16 network, requiring no system administrator.
-
- See http://www.zeroconf.org for further details, and "zcip.script"
- in the busybox examples.
-
-endmenu
projects / openwrt / svn-archive / archive.git / blobdiff