comgt: remove old network scripts

[openwrt/svn-archive/archive.git] / package / comgt / files-old / 3g.sh

diff --git a/package/comgt/files-old/3g.sh b/package/comgt/files-old/3g.sh
deleted file mode 100644 (file)
index 616beec..0000000
--- a/package/comgt/files-old/3g.sh
+++ /dev/null
@@ -1,119 +0,0 @@
-set_3g_led() {
-       # set on WRT54G3G only
-       [ -f /proc/diag/model ] || return 0
-       grep -q "WRT54G3G" /proc/diag/model >/dev/null || return 0
-       echo "$1" > /proc/diag/led/3g_green
-       echo "$2" > /proc/diag/led/3g_blue
-       grep -q "WRT54G3G$" /proc/diag/model >/dev/null || return 0
-       echo "$3" > /proc/diag/led/3g_blink
-}
-
-scan_3g() {
-       local device
-       config_get device "$1" device
-
-       # try to figure out the device if it's invalid
-       [ -n "$device" -a -e "$device" ] || {
-               for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
-                       [ -e "$device" ] && {
-                               config_set "$1" device "$device"
-                               break
-                       }
-               done
-       }
-
-       # enable 3G with the 3G button by default
-       local button
-       config_get button "$1" button
-       [ -z "$button" ] && {
-               config_set "$1" button 1
-       }
-}
-
-stop_interface_3g() {
-       stop_interface_ppp "$1"
-       set_3g_led 0 0 0
-       killall gcom >/dev/null 2>/dev/null
-}
-
-setup_interface_3g() {
-       local iface="$1"
-       local config="$2"
-       local chat="/etc/chatscripts/3g.chat"
-
-       local device
-       config_get device "$config" device
-
-       local maxwait
-       config_get maxwait "$config" maxwait
-       maxwait=${maxwait:-20}
-       while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
-               maxwait=$(($maxwait - 1))
-               sleep 1
-       done
-
-       for module in slhc ppp_generic ppp_async; do
-               /sbin/insmod $module 2>&- >&-
-       done
-
-       local apn
-       config_get apn "$config" apn
-
-       local service
-       config_get service "$config" service
-
-       local pincode
-       config_get pincode "$config" pincode
-
-       local mtu
-       config_get mtu "$config" mtu
-
-       set_3g_led 1 0 1
-
-       # figure out hardware specific commands for the card
-       case "$service" in
-               cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
-       *)
-               cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
-               if echo "$cardinfo" | grep Novatel; then
-                       case "$service" in
-                               umts_only) CODE=2;;
-                               gprs_only) CODE=1;;
-                               *) CODE=0;;
-                       esac
-                       mode="AT\$NWRAT=${CODE},2"
-               elif echo "$cardinfo" | grep Option; then
-                       case "$service" in
-                               umts_only) CODE=1;;
-                               gprs_only) CODE=0;;
-                               *) CODE=3;;
-                       esac
-                       mode="AT_OPSYS=${CODE}"
-               fi
-               # Don't assume Option to be default as it breaks with Huawei Cards/Sticks
-
-               test -z "$pincode" || {
-                       PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-                               echo "$config(3g): Failed to set the PIN code."
-                               set_3g_led 0 0 0
-                               return 1
-                       }
-               }
-               test -z "$mode" || {
-                       MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
-               }
-       esac
-       set_3g_led 1 0 0
-
-       config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
-       start_pppd "$config" \
-               noaccomp \
-               nopcomp \
-               novj \
-               nobsdcomp \
-               noauth \
-               lock \
-               crtscts \
-               ${mtu:+mtu $mtu mru $mtu} \
-               115200 "$device"
-}