* adding network config for olpc
[openwrt/svn-archive/archive.git] / package / libertas / src / rx.c
diff --git a/package/libertas/src/rx.c b/package/libertas/src/rx.c
new file mode 100644 (file)
index 0000000..6332fd4
--- /dev/null
@@ -0,0 +1,400 @@
+/**
+  * This file contains the handling of RX in wlan driver.
+  */
+#include <linux/etherdevice.h>
+#include <linux/types.h>
+
+#include "hostcmd.h"
+#include "radiotap.h"
+#include "decl.h"
+#include "dev.h"
+#include "wext.h"
+
+struct eth803hdr {
+       u8 dest_addr[6];
+       u8 src_addr[6];
+       u16 h803_len;
+} __attribute__ ((packed));
+
+struct rfc1042hdr {
+       u8 llc_dsap;
+       u8 llc_ssap;
+       u8 llc_ctrl;
+       u8 snap_oui[3];
+       u16 snap_type;
+} __attribute__ ((packed));
+
+struct rxpackethdr {
+       struct rxpd rx_pd;
+       struct eth803hdr eth803_hdr;
+       struct rfc1042hdr rfc1042_hdr;
+} __attribute__ ((packed));
+
+struct rx80211packethdr {
+       struct rxpd rx_pd;
+       void *eth80211_hdr;
+} __attribute__ ((packed));
+
+static int process_rxed_802_11_packet(struct lbs_private *priv,
+       struct sk_buff *skb);
+
+/**
+ *  @brief This function computes the avgSNR .
+ *
+ *  @param priv    A pointer to struct lbs_private structure
+ *  @return       avgSNR
+ */
+static u8 lbs_getavgsnr(struct lbs_private *priv)
+{
+       u8 i;
+       u16 temp = 0;
+       if (priv->numSNRNF == 0)
+               return 0;
+       for (i = 0; i < priv->numSNRNF; i++)
+               temp += priv->rawSNR[i];
+       return (u8) (temp / priv->numSNRNF);
+
+}
+
+/**
+ *  @brief This function computes the AvgNF
+ *
+ *  @param priv    A pointer to struct lbs_private structure
+ *  @return       AvgNF
+ */
+static u8 lbs_getavgnf(struct lbs_private *priv)
+{
+       u8 i;
+       u16 temp = 0;
+       if (priv->numSNRNF == 0)
+               return 0;
+       for (i = 0; i < priv->numSNRNF; i++)
+               temp += priv->rawNF[i];
+       return (u8) (temp / priv->numSNRNF);
+
+}
+
+/**
+ *  @brief This function save the raw SNR/NF to our internel buffer
+ *
+ *  @param priv    A pointer to struct lbs_private structure
+ *  @param prxpd   A pointer to rxpd structure of received packet
+ *  @return       n/a
+ */
+static void lbs_save_rawSNRNF(struct lbs_private *priv, struct rxpd *p_rx_pd)
+{
+       if (priv->numSNRNF < DEFAULT_DATA_AVG_FACTOR)
+               priv->numSNRNF++;
+       priv->rawSNR[priv->nextSNRNF] = p_rx_pd->snr;
+       priv->rawNF[priv->nextSNRNF] = p_rx_pd->nf;
+       priv->nextSNRNF++;
+       if (priv->nextSNRNF >= DEFAULT_DATA_AVG_FACTOR)
+               priv->nextSNRNF = 0;
+       return;
+}
+
+/**
+ *  @brief This function computes the RSSI in received packet.
+ *
+ *  @param priv    A pointer to struct lbs_private structure
+ *  @param prxpd   A pointer to rxpd structure of received packet
+ *  @return       n/a
+ */
+static void lbs_compute_rssi(struct lbs_private *priv, struct rxpd *p_rx_pd)
+{
+
+       lbs_deb_enter(LBS_DEB_RX);
+
+       lbs_deb_rx("rxpd: SNR %d, NF %d\n", p_rx_pd->snr, p_rx_pd->nf);
+       lbs_deb_rx("before computing SNR: SNR-avg = %d, NF-avg = %d\n",
+              priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE,
+              priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE);
+
+       priv->SNR[TYPE_RXPD][TYPE_NOAVG] = p_rx_pd->snr;
+       priv->NF[TYPE_RXPD][TYPE_NOAVG] = p_rx_pd->nf;
+       lbs_save_rawSNRNF(priv, p_rx_pd);
+
+       priv->SNR[TYPE_RXPD][TYPE_AVG] = lbs_getavgsnr(priv) * AVG_SCALE;
+       priv->NF[TYPE_RXPD][TYPE_AVG] = lbs_getavgnf(priv) * AVG_SCALE;
+       lbs_deb_rx("after computing SNR: SNR-avg = %d, NF-avg = %d\n",
+              priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE,
+              priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE);
+
+       priv->RSSI[TYPE_RXPD][TYPE_NOAVG] =
+           CAL_RSSI(priv->SNR[TYPE_RXPD][TYPE_NOAVG],
+                    priv->NF[TYPE_RXPD][TYPE_NOAVG]);
+
+       priv->RSSI[TYPE_RXPD][TYPE_AVG] =
+           CAL_RSSI(priv->SNR[TYPE_RXPD][TYPE_AVG] / AVG_SCALE,
+                    priv->NF[TYPE_RXPD][TYPE_AVG] / AVG_SCALE);
+
+       lbs_deb_leave(LBS_DEB_RX);
+}
+
+/**
+ *  @brief This function processes received packet and forwards it
+ *  to kernel/upper layer
+ *
+ *  @param priv    A pointer to struct lbs_private
+ *  @param skb     A pointer to skb which includes the received packet
+ *  @return       0 or -1
+ */
+int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
+{
+       int ret = 0;
+       struct net_device *dev = priv->dev;
+       struct rxpackethdr *p_rx_pkt;
+       struct rxpd *p_rx_pd;
+
+       int hdrchop;
+       struct ethhdr *p_ethhdr;
+
+       const u8 rfc1042_eth_hdr[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+
+       lbs_deb_enter(LBS_DEB_RX);
+
+       skb->ip_summed = CHECKSUM_NONE;
+
+       if (priv->monitormode != LBS_MONITOR_OFF)
+               return process_rxed_802_11_packet(priv, skb);
+
+       p_rx_pkt = (struct rxpackethdr *) skb->data;
+       p_rx_pd = &p_rx_pkt->rx_pd;
+       if (priv->mesh_dev && (p_rx_pd->rx_control & RxPD_MESH_FRAME))
+               dev = priv->mesh_dev;
+
+       lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data,
+                min_t(unsigned int, skb->len, 100));
+
+       if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) {
+               lbs_deb_rx("rx err: frame received with bad length\n");
+               priv->stats.rx_length_errors++;
+               ret = 0;
+               goto done;
+       }
+
+       /*
+        * Check rxpd status and update 802.3 stat,
+        */
+       if (!(p_rx_pd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
+               lbs_deb_rx("rx err: frame received with bad status\n");
+               lbs_pr_alert("rxpd not ok\n");
+               priv->stats.rx_errors++;
+               ret = 0;
+               goto done;
+       }
+
+       lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
+              skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
+
+       lbs_deb_hex(LBS_DEB_RX, "RX Data: Dest", p_rx_pkt->eth803_hdr.dest_addr,
+               sizeof(p_rx_pkt->eth803_hdr.dest_addr));
+       lbs_deb_hex(LBS_DEB_RX, "RX Data: Src", p_rx_pkt->eth803_hdr.src_addr,
+               sizeof(p_rx_pkt->eth803_hdr.src_addr));
+
+       if (memcmp(&p_rx_pkt->rfc1042_hdr,
+                  rfc1042_eth_hdr, sizeof(rfc1042_eth_hdr)) == 0) {
+               /*
+                *  Replace the 803 header and rfc1042 header (llc/snap) with an
+                *    EthernetII header, keep the src/dst and snap_type (ethertype)
+                *
+                *  The firmware only passes up SNAP frames converting
+                *    all RX Data from 802.11 to 802.2/LLC/SNAP frames.
+                *
+                *  To create the Ethernet II, just move the src, dst address right
+                *    before the snap_type.
+                */
+               p_ethhdr = (struct ethhdr *)
+                   ((u8 *) & p_rx_pkt->eth803_hdr
+                    + sizeof(p_rx_pkt->eth803_hdr) + sizeof(p_rx_pkt->rfc1042_hdr)
+                    - sizeof(p_rx_pkt->eth803_hdr.dest_addr)
+                    - sizeof(p_rx_pkt->eth803_hdr.src_addr)
+                    - sizeof(p_rx_pkt->rfc1042_hdr.snap_type));
+
+               memcpy(p_ethhdr->h_source, p_rx_pkt->eth803_hdr.src_addr,
+                      sizeof(p_ethhdr->h_source));
+               memcpy(p_ethhdr->h_dest, p_rx_pkt->eth803_hdr.dest_addr,
+                      sizeof(p_ethhdr->h_dest));
+
+               /* Chop off the rxpd + the excess memory from the 802.2/llc/snap header
+                *   that was removed
+                */
+               hdrchop = (u8 *) p_ethhdr - (u8 *) p_rx_pkt;
+       } else {
+               lbs_deb_hex(LBS_DEB_RX, "RX Data: LLC/SNAP",
+                       (u8 *) & p_rx_pkt->rfc1042_hdr,
+                       sizeof(p_rx_pkt->rfc1042_hdr));
+
+               /* Chop off the rxpd */
+               hdrchop = (u8 *) & p_rx_pkt->eth803_hdr - (u8 *) p_rx_pkt;
+       }
+
+       /* Chop off the leading header bytes so the skb points to the start of
+        *   either the reconstructed EthII frame or the 802.2/llc/snap frame
+        */
+       skb_pull(skb, hdrchop);
+
+       /* Take the data rate from the rxpd structure
+        * only if the rate is auto
+        */
+       if (priv->auto_rate)
+               priv->cur_rate = lbs_fw_index_to_data_rate(p_rx_pd->rx_rate);
+
+       lbs_compute_rssi(priv, p_rx_pd);
+
+       lbs_deb_rx("rx data: size of actual packet %d\n", skb->len);
+       priv->stats.rx_bytes += skb->len;
+       priv->stats.rx_packets++;
+
+       skb->protocol = eth_type_trans(skb, dev);
+       netif_rx(skb);
+
+       ret = 0;
+done:
+       lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret);
+       return ret;
+}
+EXPORT_SYMBOL_GPL(lbs_process_rxed_packet);
+
+/**
+ *  @brief This function converts Tx/Rx rates from the Marvell WLAN format
+ *  (see Table 2 in Section 3.1) to IEEE80211_RADIOTAP_RATE units (500 Kb/s)
+ *
+ *  @param rate    Input rate
+ *  @return       Output Rate (0 if invalid)
+ */
+static u8 convert_mv_rate_to_radiotap(u8 rate)
+{
+       switch (rate) {
+       case 0:         /*   1 Mbps */
+               return 2;
+       case 1:         /*   2 Mbps */
+               return 4;
+       case 2:         /* 5.5 Mbps */
+               return 11;
+       case 3:         /*  11 Mbps */
+               return 22;
+       /* case 4: reserved */
+       case 5:         /*   6 Mbps */
+               return 12;
+       case 6:         /*   9 Mbps */
+               return 18;
+       case 7:         /*  12 Mbps */
+               return 24;
+       case 8:         /*  18 Mbps */
+               return 36;
+       case 9:         /*  24 Mbps */
+               return 48;
+       case 10:                /*  36 Mbps */
+               return 72;
+       case 11:                /*  48 Mbps */
+               return 96;
+       case 12:                /*  54 Mbps */
+               return 108;
+       }
+       lbs_pr_alert("Invalid Marvell WLAN rate %i\n", rate);
+       return 0;
+}
+
+/**
+ *  @brief This function processes a received 802.11 packet and forwards it
+ *  to kernel/upper layer
+ *
+ *  @param priv    A pointer to struct lbs_private
+ *  @param skb     A pointer to skb which includes the received packet
+ *  @return       0 or -1
+ */
+static int process_rxed_802_11_packet(struct lbs_private *priv,
+       struct sk_buff *skb)
+{
+       int ret = 0;
+
+       struct rx80211packethdr *p_rx_pkt;
+       struct rxpd *prxpd;
+       struct rx_radiotap_hdr radiotap_hdr;
+       struct rx_radiotap_hdr *pradiotap_hdr;
+
+       lbs_deb_enter(LBS_DEB_RX);
+
+       p_rx_pkt = (struct rx80211packethdr *) skb->data;
+       prxpd = &p_rx_pkt->rx_pd;
+
+       // lbs_deb_hex(LBS_DEB_RX, "RX Data: Before chop rxpd", skb->data, min(skb->len, 100));
+
+       if (skb->len < (ETH_HLEN + 8 + sizeof(struct rxpd))) {
+               lbs_deb_rx("rx err: frame received with bad length\n");
+               priv->stats.rx_length_errors++;
+               ret = -EINVAL;
+               kfree(skb);
+               goto done;
+       }
+
+       /*
+        * Check rxpd status and update 802.3 stat,
+        */
+       if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK))) {
+               //lbs_deb_rx("rx err: frame received with bad status\n");
+               priv->stats.rx_errors++;
+       }
+
+       lbs_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n",
+              skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd));
+
+       /* create the exported radio header */
+
+       /* radiotap header */
+       radiotap_hdr.hdr.it_version = 0;
+       /* XXX must check this value for pad */
+       radiotap_hdr.hdr.it_pad = 0;
+       radiotap_hdr.hdr.it_len = cpu_to_le16 (sizeof(struct rx_radiotap_hdr));
+       radiotap_hdr.hdr.it_present = cpu_to_le32 (RX_RADIOTAP_PRESENT);
+       /* unknown values */
+       radiotap_hdr.flags = 0;
+       radiotap_hdr.chan_freq = 0;
+       radiotap_hdr.chan_flags = 0;
+       radiotap_hdr.antenna = 0;
+       /* known values */
+       radiotap_hdr.rate = convert_mv_rate_to_radiotap(prxpd->rx_rate);
+       /* XXX must check no carryout */
+       radiotap_hdr.antsignal = prxpd->snr + prxpd->nf;
+       radiotap_hdr.rx_flags = 0;
+       if (!(prxpd->status & cpu_to_le16(MRVDRV_RXPD_STATUS_OK)))
+               radiotap_hdr.rx_flags |= IEEE80211_RADIOTAP_F_RX_BADFCS;
+       //memset(radiotap_hdr.pad, 0x11, IEEE80211_RADIOTAP_HDRLEN - 18);
+
+       /* chop the rxpd */
+       skb_pull(skb, sizeof(struct rxpd));
+
+       /* add space for the new radio header */
+       if ((skb_headroom(skb) < sizeof(struct rx_radiotap_hdr)) &&
+           pskb_expand_head(skb, sizeof(struct rx_radiotap_hdr), 0, GFP_ATOMIC)) {
+               lbs_pr_alert("%s: couldn't pskb_expand_head\n", __func__);
+               ret = -ENOMEM;
+               kfree_skb(skb);
+               goto done;
+       }
+
+       pradiotap_hdr = (void *)skb_push(skb, sizeof(struct rx_radiotap_hdr));
+       memcpy(pradiotap_hdr, &radiotap_hdr, sizeof(struct rx_radiotap_hdr));
+
+       /* Take the data rate from the rxpd structure
+        * only if the rate is auto
+        */
+       if (priv->auto_rate)
+               priv->cur_rate = lbs_fw_index_to_data_rate(prxpd->rx_rate);
+
+       lbs_compute_rssi(priv, prxpd);
+
+       lbs_deb_rx("rx data: size of actual packet %d\n", skb->len);
+       priv->stats.rx_bytes += skb->len;
+       priv->stats.rx_packets++;
+
+       skb->protocol = eth_type_trans(skb, priv->rtap_net_dev);
+       netif_rx(skb);
+
+       ret = 0;
+
+done:
+       lbs_deb_leave_args(LBS_DEB_RX, "ret %d", ret);
+       return ret;
+}