move a few unmaintained packages from trunk to /packages

[openwrt/svn-archive/archive.git] / package / madwifi / patches / 383-ibss_hostap.patch

diff --git a/package/madwifi/patches/383-ibss_hostap.patch b/package/madwifi/patches/383-ibss_hostap.patch
deleted file mode 100644 (file)
index d449c30..0000000
--- a/package/madwifi/patches/383-ibss_hostap.patch
+++ /dev/null
@@ -1,105 +0,0 @@
---- a/ath/if_ath.c
-+++ b/ath/if_ath.c
-@@ -1452,6 +1452,23 @@ ath_vap_create(struct ieee80211com *ic,
-               sc->sc_nstavaps++;
-       else if (opmode == IEEE80211_M_MONITOR)
-               sc->sc_nmonvaps++;
-+
-+
-+      /* Driving the HAL in IBSS sometimes adapts the TSF and other timing registers
-+       * from received beacons/probes. If that happens, expected TX interrupts may
-+       * not occur until next reset. Which triggers the "lost beacon" tasklet.
-+       * Resulting effectively in not sending packets for minutes. Because that only
-+       * happens in large mesh networks, this mode needs to be activated by a kernel
-+       * module parameter: hostap_for_ibss=1. Note that using this mode has side
-+       * effects. Such as not supressing beacons/probe answers randomly when
-+       * receiving other node beacons. It's recommended to lower the beacon interval
-+       * then. When using an IBSS-VAP together with an HOSTAP-VAP, you may also need
-+       * to re-trigger IBSS beacon generation after creating the HOSTAP-VAP by
-+       * issueing "iwpriv athX bintval 1000".
-+       */
-+      if ((flags & IEEE80211_NO_STABEACONS) && (ic->ic_opmode == IEEE80211_M_IBSS))
-+              sc->sc_opmode = HAL_M_HOSTAP;
-+      else
-       /*
-        * Adhoc demo mode is a pseudo mode; to the HAL it's
-        * just IBSS mode and the driver doesn't use management
-@@ -4279,7 +4296,8 @@ ath_calcrxfilter(struct ath_softc *sc)
-       if (ic->ic_opmode != IEEE80211_M_HOSTAP && (dev->flags & IFF_PROMISC))
-               rfilt |= HAL_RX_FILTER_PROM;
-       if (ic->ic_opmode == IEEE80211_M_STA ||
--          sc->sc_opmode == HAL_M_IBSS ||      /* NB: AHDEMO too */
-+          ic->ic_opmode == IEEE80211_M_IBSS ||
-+          ic->ic_opmode == IEEE80211_M_AHDEMO ||
-           (sc->sc_nostabeacons) || sc->sc_scanning ||
-               (ic->ic_opmode == IEEE80211_M_HOSTAP))
-               rfilt |= HAL_RX_FILTER_BEACON;
-@@ -6435,6 +6453,33 @@ ath_capture(struct net_device *dev, cons
- }
- 
- /*
-+ * Advances (forwards/adds) a microsecond value to current chip's TSF registers
-+ */
-+
-+/* from ath_info.c */
-+#define AR5K_TSF_L32_5210             0x806c  /* TSF (lower 32 bits) */
-+#define AR5K_TSF_L32_5211             0x804c
-+#define AR5K_TSF_L32                  (ar_device(ah->ah_sc->devid) == 5210 ? \
-+                                      AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
-+
-+#define AR5K_TSF_U32_5210             0x8070
-+#define AR5K_TSF_U32_5211             0x8050
-+#define AR5K_TSF_U32                  (ar_device(ah->ah_sc->devid) == 5210 ? \
-+                                      AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
-+
-+static inline void ath_hal_settsf64(struct ath_hal *ah, u_int64_t tsf_adv)
-+{
-+      ATH_HAL_LOCK_IRQ(ah->ah_sc);
-+      ath_hal_set_function(__func__);
-+      tsf_adv += ah->ah_getTsf64(ah);
-+      OS_REG_WRITE(ah, AR5K_TSF_L32, 0ll);
-+      OS_REG_WRITE(ah, AR5K_TSF_U32, (tsf_adv >> 32) & 0xffffffffll);
-+      OS_REG_WRITE(ah, AR5K_TSF_L32, (tsf_adv >> 00) & 0xffffffffll);
-+      ath_hal_set_function(NULL);
-+      ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
-+}
-+
-+/*
-  * Intercept management frames to collect beacon RSSI data and to do
-  * ibss merges. This function is called for all management frames,
-  * including those belonging to other BSS.
-@@ -6487,10 +6532,19 @@ ath_recv_mgmt(struct ieee80211vap * vap,
-                       DPRINTF(sc, ATH_DEBUG_BEACON, 
-                               "Updated beacon timers\n");
-               }
--              if ((sc->sc_opmode == HAL_M_IBSS) &&
--                              IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) &&
--                              ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval)) {
--                      DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
-+              if ((vap->iv_opmode == IEEE80211_M_IBSS) &&
-+                              (sc->sc_opmode == HAL_M_HOSTAP) &&
-+                              IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
-+                      /* In this mode, we drive the HAL in HOSTAP mode. Hence
-+                       * we do the IBSS merging in software. Also do not merge
-+                       * if the difference it too small. Otherwise we are playing
-+                       * tsf-pingpong with other vendors drivers */
-+                      beacon_tsf = le64_to_cpu(ni->ni_tstamp.tsf);
-+                      if (beacon_tsf > rtsf + 0xffff) {
-+                              ath_hal_settsf64(sc->sc_ah, beacon_tsf - rtsf);
-+                              ieee80211_ibss_merge(ni);
-+                      }
-+                      break;
-               }
-               /* NB: Fall Through */
-       case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
-@@ -6563,6 +6617,10 @@ ath_recv_mgmt(struct ieee80211vap * vap,
- #endif
-                       if (do_merge)
-                               ieee80211_ibss_merge(ni);
-+
-+                      if ((sc->sc_opmode == HAL_M_IBSS) &&
-+                                      ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval))
-+                              DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
-               }
-               break;
-       }