+++ /dev/null
---- a/net80211/ieee80211_input.c
-+++ b/net80211/ieee80211_input.c
-@@ -294,10 +294,10 @@ ieee80211_input(struct ieee80211vap * va
- break;
- case IEEE80211_M_IBSS:
- case IEEE80211_M_AHDEMO:
-- if (!IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_bssid) ||
-+ if ((!IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_bssid) ||
- (!IEEE80211_ADDR_EQ(wh->i_addr1, vap->iv_myaddr) &&
-- !IEEE80211_IS_MULTICAST(wh->i_addr1) &&
-- (subtype != IEEE80211_FC0_SUBTYPE_BEACON))) {
-+ !IEEE80211_IS_MULTICAST(wh->i_addr1))) &&
-+ (type == IEEE80211_FC0_TYPE_DATA)) {
- if (!(vap->iv_dev->flags & IFF_PROMISC)) {
- IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT,
- bssid, NULL, "%s", "not to bss");
-@@ -322,22 +322,15 @@ ieee80211_input(struct ieee80211vap * va
- }
- /* Do not try to find a node reference if the packet really did come from the BSS */
- if (type == IEEE80211_FC0_TYPE_DATA && ni == vap->iv_bss &&
-- !IEEE80211_ADDR_EQ(vap->iv_bss->ni_macaddr, wh->i_addr2) &&
- IEEE80211_ADDR_EQ(vap->iv_bssid, wh->i_addr3)) {
- /* Try to find sender in local node table. */
-- ni = ieee80211_find_node(&ic->ic_sta, wh->i_addr2);
-+ if (!ni_or_null) {
-+ ieee80211_unref_node(&ni);
-+ ni = ieee80211_find_txnode(vap, wh->i_addr2);
-+ }
- if (ni == NULL) {
-- /*
-- * Fake up a node for this newly discovered
-- * member of the IBSS. This should probably
-- * done after an ACL check.
-- */
-- ni = ieee80211_fakeup_adhoc_node(vap,
-- wh->i_addr2);
-- if (ni == NULL) {
-- /* NB: stat kept for alloc failure */
-- goto err;
-- }
-+ /* NB: stat kept for alloc failure */
-+ goto discard;
- }
- }
- iwspy_event(vap, ni, rssi);
-@@ -3553,8 +3546,8 @@ ieee80211_recv_mgmt(struct ieee80211vap
- (((vap->iv_opmode == IEEE80211_M_HOSTAP) ||
- (vap->iv_opmode == IEEE80211_M_WDS)) &&
- (scan.capinfo & IEEE80211_CAPINFO_ESS))) {
-+ struct ieee80211_node *tni = NULL;
- struct ieee80211vap *avp = NULL;
-- int do_unref = 0;
- int found = 0;
-
- IEEE80211_LOCK_IRQ(vap->iv_ic);
-@@ -3570,14 +3563,12 @@ ieee80211_recv_mgmt(struct ieee80211vap
- }
- }
- if (found)
-- ni = ni_or_null = avp->iv_wdsnode;
-+ tni = ieee80211_ref_node(avp->iv_wdsnode);
- } else if ((vap->iv_opmode == IEEE80211_M_WDS) && vap->iv_wdsnode) {
- found = 1;
-- ni = ni_or_null = vap->iv_wdsnode;
-- } else if (vap->iv_opmode == IEEE80211_M_IBSS) {
-- ni_or_null = ieee80211_find_node(&ic->ic_sta, wh->i_addr2);
-- if (ni_or_null)
-- ni = ni_or_null;
-+ tni = ieee80211_ref_node(vap->iv_wdsnode);
-+ } else if ((vap->iv_opmode == IEEE80211_M_IBSS) && (vap->iv_state == IEEE80211_S_RUN)) {
-+ tni = ieee80211_find_node(&ic->ic_sta, wh->i_addr2);
- found = 1;
- }
- IEEE80211_UNLOCK_IRQ(vap->iv_ic);
-@@ -3585,20 +3576,21 @@ ieee80211_recv_mgmt(struct ieee80211vap
- if (!found)
- break;
-
-- if (ni_or_null == NULL) {
-+ memcpy(&SKB_CB(skb)->beacon_tsf, scan.tstamp, sizeof(u_int64_t));
-+
-+ if (tni == NULL) {
- if (avp) {
- IEEE80211_LOCK_IRQ(ic);
-- ni = ieee80211_add_neighbor(avp, wh, &scan);
-+ tni = ieee80211_add_neighbor(avp, wh, &scan);
- /* force assoc */
-- ni->ni_associd |= 0xc000;
-- avp->iv_wdsnode = ieee80211_ref_node(ni);
-+ tni->ni_associd |= 0xc000;
-+ avp->iv_wdsnode = ieee80211_ref_node(tni);
- IEEE80211_UNLOCK_IRQ(ic);
- } else if ((vap->iv_opmode == IEEE80211_M_IBSS) &&
- IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_bssid)) {
- /* Create a new entry in the neighbor table. */
-- ni = ieee80211_add_neighbor(vap, wh, &scan);
-+ tni = ieee80211_add_neighbor(vap, wh, &scan);
- }
-- do_unref = 1;
- } else {
- /*
- * Copy data from beacon to neighbor table.
-@@ -3606,39 +3598,38 @@ ieee80211_recv_mgmt(struct ieee80211vap
- * ieee80211_add_neighbor(), so we just copy
- * everything over to be safe.
- */
-- ni->ni_esslen = scan.ssid[1];
-- memcpy(ni->ni_essid, scan.ssid + 2, scan.ssid[1]);
-- IEEE80211_ADDR_COPY(ni->ni_bssid, wh->i_addr3);
-- memcpy(ni->ni_tstamp.data, scan.tstamp,
-- sizeof(ni->ni_tstamp));
-- ni->ni_inact = ni->ni_inact_reload;
-- ni->ni_intval =
-+ tni->ni_esslen = scan.ssid[1];
-+ memcpy(tni->ni_essid, scan.ssid + 2, scan.ssid[1]);
-+ IEEE80211_ADDR_COPY(tni->ni_bssid, wh->i_addr3);
-+ memcpy(tni->ni_tstamp.data, scan.tstamp,
-+ sizeof(tni->ni_tstamp));
-+ tni->ni_inact = tni->ni_inact_reload;
-+ tni->ni_intval =
- IEEE80211_BINTVAL_SANITISE(scan.bintval);
-- ni->ni_capinfo = scan.capinfo;
-- ni->ni_chan = ic->ic_curchan;
-- ni->ni_fhdwell = scan.fhdwell;
-- ni->ni_fhindex = scan.fhindex;
-- ni->ni_erp = scan.erp;
-- ni->ni_timoff = scan.timoff;
-+ tni->ni_capinfo = scan.capinfo;
-+ tni->ni_chan = ic->ic_curchan;
-+ tni->ni_fhdwell = scan.fhdwell;
-+ tni->ni_fhindex = scan.fhindex;
-+ tni->ni_erp = scan.erp;
-+ tni->ni_timoff = scan.timoff;
- if (scan.wme != NULL)
-- ieee80211_saveie(&ni->ni_wme_ie, scan.wme);
-+ ieee80211_saveie(&tni->ni_wme_ie, scan.wme);
- if (scan.wpa != NULL)
-- ieee80211_saveie(&ni->ni_wpa_ie, scan.wpa);
-+ ieee80211_saveie(&tni->ni_wpa_ie, scan.wpa);
- if (scan.rsn != NULL)
-- ieee80211_saveie(&ni->ni_rsn_ie, scan.rsn);
-+ ieee80211_saveie(&tni->ni_rsn_ie, scan.rsn);
- if (scan.ath != NULL)
-- ieee80211_saveath(ni, scan.ath);
-+ ieee80211_saveath(tni, scan.ath);
-
- /* NB: must be after ni_chan is setup */
-- ieee80211_setup_rates(ni, scan.rates,
-+ ieee80211_setup_rates(tni, scan.rates,
- scan.xrates, IEEE80211_F_DOSORT);
- }
-- if (ni != NULL) {
-- ni->ni_rssi = rssi;
-- ni->ni_rtsf = rtsf;
-- ni->ni_last_rx = jiffies;
-- if (do_unref)
-- ieee80211_unref_node(&ni);
-+ if (tni != NULL) {
-+ tni->ni_rssi = rssi;
-+ tni->ni_rtsf = rtsf;
-+ tni->ni_last_rx = jiffies;
-+ ieee80211_unref_node(&tni);
- }
- }
- break;
---- a/net80211/ieee80211_node.c
-+++ b/net80211/ieee80211_node.c
-@@ -53,6 +53,7 @@
-
- #include <net80211/ieee80211_var.h>
- #include <net80211/if_athproto.h>
-+#include <net80211/ieee80211_node.h>
-
- /*
- * Association IDs are managed with a bit vector.
-@@ -317,16 +318,11 @@ ieee80211_create_ibss(struct ieee80211va
- /* Check to see if we already have a node for this mac
- * NB: we gain a node reference here
- */
-- ni = ieee80211_find_txnode(vap, vap->iv_myaddr);
-+ ieee80211_node_table_reset(&ic->ic_sta, vap);
-+ ni = ieee80211_alloc_node_table(vap, vap->iv_myaddr);
- if (ni == NULL) {
-- ni = ieee80211_alloc_node_table(vap, vap->iv_myaddr);
-- IEEE80211_DPRINTF(vap, IEEE80211_MSG_ASSOC,
-- "%s: ni:%p allocated for " MAC_FMT "\n",
-- __func__, ni, MAC_ADDR(vap->iv_myaddr));
-- if (ni == NULL) {
-- /* XXX recovery? */
-- return;
-- }
-+ /* XXX recovery? */
-+ return;
- }
-
- IEEE80211_ADDR_COPY(ni->ni_bssid, vap->iv_myaddr);
-@@ -647,7 +643,7 @@ ieee80211_sta_join1(struct ieee80211_nod
- (vap->iv_state == IEEE80211_S_RUN) && bssid_equal(obss, selbs)); */
- vap->iv_bss = selbs;
- IEEE80211_ADDR_COPY(vap->iv_bssid, selbs->ni_bssid);
-- if (obss != NULL) {
-+ if ((obss != NULL) && (obss != selbs)) {
- if (obss->ni_table)
- ieee80211_node_leave(obss);
- ieee80211_unref_node(&obss);
---- a/ath/if_ath.c
-+++ b/ath/if_ath.c
-@@ -6625,14 +6625,6 @@ ath_recv_mgmt(struct ieee80211vap * vap,
-
- sc->sc_recv_mgmt(vap, ni_or_null, skb, subtype, rssi, rtsf);
-
-- /* Lookup the new node if any (this grabs a reference to it) */
-- ni = ieee80211_find_rxnode(vap->iv_ic, vap,
-- (const struct ieee80211_frame_min *)skb->data);
-- if (ni == NULL) {
-- DPRINTF(sc, ATH_DEBUG_BEACON, "Dropping; node unknown.\n");
-- return;
-- }
--
- switch (subtype) {
- case IEEE80211_FC0_SUBTYPE_BEACON:
- /* update RSSI statistics for use by the HAL */
-@@ -6654,11 +6646,9 @@ ath_recv_mgmt(struct ieee80211vap * vap,
- * we do the IBSS merging in software. Also do not merge
- * if the difference it too small. Otherwise we are playing
- * tsf-pingpong with other vendors drivers */
-- beacon_tsf = le64_to_cpu(ni->ni_tstamp.tsf);
-- if (beacon_tsf > rtsf + 0xffff) {
-+ beacon_tsf = le64_to_cpu(SKB_CB(skb)->beacon_tsf);
-+ if (beacon_tsf > rtsf + 0xffff)
- ath_hal_settsf64(sc->sc_ah, beacon_tsf - rtsf);
-- ieee80211_ibss_merge(ni);
-- }
- break;
- }
- /* NB: Fall Through */
-@@ -6680,13 +6670,21 @@ ath_recv_mgmt(struct ieee80211vap * vap,
- hw_tsf = ath_hal_gettsf64(sc->sc_ah);
- hw_tu = hw_tsf >> 10;
-
-- beacon_tsf = le64_to_cpu(ni->ni_tstamp.tsf);
-+ beacon_tsf = le64_to_cpu(SKB_CB(skb)->beacon_tsf);
- beacon_tu = beacon_tsf >> 10;
-
-+ if (!beacon_tsf)
-+ break;
-+
-+ if (IEEE80211_ADDR_EQ(wh->i_addr3, vap->iv_bssid))
-+ break;
-+
- DPRINTF(sc, ATH_DEBUG_BEACON,
-- "Beacon transmitted at %10llx, "
-+ "Beacon transmitted from "MAC_FMT" ("MAC_FMT") at %10llx, "
- "received at %10llx(%lld), hw TSF "
- "%10llx(%lld)\n",
-+ MAC_ADDR(wh->i_addr3),
-+ MAC_ADDR(vap->iv_bssid),
- beacon_tsf,
- rtsf, rtsf - beacon_tsf,
- hw_tsf, hw_tsf - beacon_tsf);
-@@ -6699,39 +6697,13 @@ ath_recv_mgmt(struct ieee80211vap * vap,
- do_merge = 1;
- }
-
-- /* Check sc_nexttbtt */
-- if (sc->sc_nexttbtt < hw_tu) {
-- DPRINTF(sc, ATH_DEBUG_BEACON,
-- "sc_nexttbtt (%8x TU) is in the past "
-- "(tsf %8x TU), updating timers\n",
-- sc->sc_nexttbtt, hw_tu);
-- do_merge = 1;
-- }
--
-- intval = ni->ni_intval & HAL_BEACON_PERIOD;
--#if 0
-- /* This code is disabled since it would produce
-- * unwanted merge. For instance, in a two nodes network
-- * A & B, A can merge to B and at the same time, B will
-- * merge to A, still having a split */
-- if (intval != 0) {
-- if ((sc->sc_nexttbtt % intval) !=
-- (beacon_tu % intval)) {
-- DPRINTF(sc, ATH_DEBUG_BEACON,
-- "ibss merge: "
-- "sc_nexttbtt %10x TU "
-- "(%3d) beacon %10x TU "
-- "(%3d)\n",
-- sc->sc_nexttbtt,
-- sc->sc_nexttbtt % intval,
-- beacon_tu,
-- beacon_tu % intval);
-- do_merge = 1;
-- }
-- }
--#endif
-- if (do_merge)
-+ if (do_merge) {
-+ /* Lookup the new node if any (this grabs a reference to it) */
-+ ni = ieee80211_find_txnode(vap, wh->i_addr2);
-+ memcpy(ni->ni_bssid, wh->i_addr3, IEEE80211_ADDR_LEN);
- ieee80211_ibss_merge(ni);
-+ ieee80211_unref_node(&ni);
-+ }
-
- if ((sc->sc_opmode == HAL_M_IBSS) &&
- ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval))
-@@ -6739,8 +6711,6 @@ ath_recv_mgmt(struct ieee80211vap * vap,
- }
- break;
- }
--
-- ieee80211_unref_node(&ni);
- }
-
- static void
---- a/net80211/ieee80211_linux.h
-+++ b/net80211/ieee80211_linux.h
-@@ -411,7 +411,7 @@ typedef spinlock_t acl_lock_t;
- * 8 bytes so we reserve/avoid it.
- */
- struct ieee80211_cb {
-- u_int8_t vlan[8]; /* reserve for vlan tag info */
-+ u_int64_t beacon_tsf;
- struct ieee80211_node *ni;
- u_int32_t flags;
- #define M_LINK0 0x01 /* frame needs WEP encryption */
---- a/net80211/ieee80211_scan_sta.c
-+++ b/net80211/ieee80211_scan_sta.c
-@@ -1125,11 +1125,8 @@ adhoc_default_action(struct ieee80211vap
- u_int8_t zeroMacAddr[IEEE80211_ADDR_LEN];
-
- memset(&zeroMacAddr, 0, IEEE80211_ADDR_LEN);
-- if (IEEE80211_ADDR_EQ(se->se_bssid, &zeroMacAddr[0])) {
-- ieee80211_create_ibss(vap, se->se_chan);
-- return 1;
-- } else
-- return ieee80211_sta_join(vap, se);
-+ ieee80211_create_ibss(vap, se->se_chan);
-+ return 1;
- }
-
- static const struct ieee80211_scanner adhoc_default = {
projects / openwrt / svn-archive / archive.git / blobdiff