move more extra packages from ./trunk to ./packages

[openwrt/svn-archive/archive.git] / package / openswan / files / ipsec.init

diff --git a/package/openswan/files/ipsec.init b/package/openswan/files/ipsec.init
deleted file mode 100755 (executable)
index 33c4163..0000000
--- a/package/openswan/files/ipsec.init
+++ /dev/null
@@ -1,158 +0,0 @@
-#!/bin/sh /etc/rc.common
-# IPsec startup and shutdown script
-# Copyright (C) 1998, 1999, 2001  Henry Spencer.
-# Copyright (C) 2002              Michael Richardson <mcr@freeswan.org>
-# Copyright (C) 2006              OpenWrt.org
-# 
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or (at your
-# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
-# 
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# RCSID $Id: setup.in,v 1.122.6.1 2005/07/25 19:17:03 ken Exp $
-#
-# ipsec         init.d script for starting and stopping
-#               the IPsec security subsystem (KLIPS and Pluto).
-#
-# This script becomes /etc/rc.d/init.d/ipsec (or possibly /etc/init.d/ipsec)
-# and is also accessible as "ipsec setup" (the preferred route for human
-# invocation).
-#
-# The startup and shutdown times are a difficult compromise (in particular,
-# it is almost impossible to reconcile them with the insanely early/late
-# times of NFS filesystem startup/shutdown).  Startup is after startup of
-# syslog and pcmcia support; shutdown is just before shutdown of syslog.
-#
-# chkconfig: 2345 47 76
-# description: IPsec provides encrypted and authenticated communications; \
-# KLIPS is the kernel half of it, Pluto is the user-level management daemon.
-
-START=60
-script_init() {
-       me='ipsec setup'                # for messages
-
-       # where the private directory and the config files are
-       IPSEC_EXECDIR="${IPSEC_EXECDIR-/usr/libexec/ipsec}"
-       IPSEC_LIBDIR="${IPSEC_LIBDIR-/usr/lib/ipsec}"
-       IPSEC_SBINDIR="${IPSEC_SBINDIR-/usr/sbin}"
-       IPSEC_CONFS="${IPSEC_CONFS-/etc}"
-
-       if test " $IPSEC_DIR" = " "     # if we were not called by the ipsec command
-       then
-           # we must establish a suitable PATH ourselves
-           PATH="${IPSEC_SBINDIR}":/sbin:/usr/sbin:/usr/local/bin:/bin:/usr/bin
-           export PATH
-
-           IPSEC_DIR="$IPSEC_LIBDIR"
-           export IPSEC_DIR IPSEC_CONFS IPSEC_LIBDIR IPSEC_EXECDIR
-       fi
-
-       # Check that the ipsec command is available.
-       found=
-       for dir in `echo $PATH | tr ':' ' '`
-       do
-               if test -f $dir/ipsec -a -x $dir/ipsec
-               then
-                       found=yes
-                       break                   # NOTE BREAK OUT
-               fi
-       done
-       if ! test "$found"
-       then
-               echo "cannot find ipsec command -- \`$1' aborted" |
-                       logger -s -p daemon.error -t ipsec_setup
-               exit 1
-       fi
-
-       # Pick up IPsec configuration (until we have done this, successfully, we
-       # do not know where errors should go, hence the explicit "daemon.error"s.)
-       # Note the "--export", which exports the variables created.
-       eval `ipsec _confread $config --optional --varprefix IPSEC --export --type config setup`
-
-       if test " $IPSEC_confreadstatus" != " "
-       then
-           case $1 in 
-           stop|--stop|_autostop) 
-               echo "$IPSEC_confreadstatus -- \`$1' may not work" |
-                       logger -s -p daemon.error -t ipsec_setup;;
-
-           *) echo "$IPSEC_confreadstatus -- \`$1' aborted" |
-                   logger -s -p daemon.error -t ipsec_setup;
-               exit 1;;
-           esac
-       fi
-
-       IPSEC_confreadsection=${IPSEC_confreadsection:-setup}
-       export IPSEC_confreadsection
-
-       IPSECsyslog=${IPSECsyslog-daemon.error}
-       export IPSECsyslog
-
-       # misc setup
-       umask 022
-
-       mkdir -p /var/run/pluto
-}
-
-script_command() {
-       if [ "${USER}" != "root" ]
-       then
-               echo "permission denied (must be superuser)" |
-                       logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
-               exit 1
-       fi
-       # make sure all required directories exist
-       if [ ! -d /var/run/pluto ]
-       then
-               mkdir -p /var/run/pluto
-       fi
-       if [ ! -d /var/lock/subsys ]
-       then
-               mkdir -p /var/lock/subsys
-       fi
-       tmp=/var/run/pluto/ipsec_setup.st
-       outtmp=/var/run/pluto/ipsec_setup.out
-       (
-               ipsec _realsetup $1
-               echo "$?" >$tmp
-       ) > ${outtmp} 2>&1
-       st=$?
-       if test -f $tmp
-       then
-               st=`cat $tmp`
-               rm -f $tmp
-       fi
-       if [ -f ${outtmp} ]; then
-               cat ${outtmp} | logger -s -p $IPSECsyslog -t ipsec_setup 2>&1
-               rm -f ${outtmp}
-       fi
-}
-
-
-start() {
-       script_init start "$@"
-       script_command start "$@"
-}
-
-stop() {
-       script_init stop "$@"
-       script_command stop "$@"
-}
-
-restart() {
-       script_init stop "$@"
-       script_command stop "$@"
-       script_command start "$@"
-}
-
-status() {
-       script_init status "$@"
-       ipsec _realsetup status
-}
-EXTRA_COMMANDS=status
-EXTRA_HELP="   status  Show the status of the service"