move ifxmips uboot to package/

[openwrt/svn-archive/archive.git] / package / uboot-ifxmips / files / cpu / mips / danube / au1x00_serial.c

diff --git a/package/uboot-ifxmips/files/cpu/mips/danube/au1x00_serial.c b/package/uboot-ifxmips/files/cpu/mips/danube/au1x00_serial.c
new file mode 100644 (file)
index 0000000..42c668e
--- /dev/null
+++ b/package/uboot-ifxmips/files/cpu/mips/danube/au1x00_serial.c
@@ -0,0 +1,135 @@
+/*
+ * AU1X00 UART support
+ *
+ * Hardcoded to UART 0 for now
+ * Speed and options also hardcoded to 115200 8N1
+ *
+ *  Copyright (c) 2003 Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_AU1X00
+
+#include <common.h>
+#include <asm/au1x00.h>
+
+/******************************************************************************
+*
+* serial_init - initialize a channel
+*
+* This routine initializes the number of data bits, parity
+* and set the selected baud rate. Interrupts are disabled.
+* Set the modem control signals if the option is selected.
+*
+* RETURNS: N/A
+*/
+
+int serial_init (void)
+{
+       volatile u32 *uart_fifoctl = (volatile u32*)(UART0_ADDR+UART_FCR);
+       volatile u32 *uart_enable = (volatile u32*)(UART0_ADDR+UART_ENABLE);
+
+       /* Enable clocks first */
+       *uart_enable = UART_EN_CE;
+
+       /* Then release reset */
+       /* Must release reset before setting other regs */
+       *uart_enable = UART_EN_CE|UART_EN_E;
+
+       /* Activate fifos, reset tx and rx */
+       /* Set tx trigger level to 12 */
+       *uart_fifoctl = UART_FCR_ENABLE_FIFO|UART_FCR_CLEAR_RCVR|
+               UART_FCR_CLEAR_XMIT|UART_FCR_T_TRIGGER_12;
+
+       serial_setbrg();
+
+       return 0;
+}
+
+
+void serial_setbrg (void)
+{
+       volatile u32 *uart_clk = (volatile u32*)(UART0_ADDR+UART_CLK);
+       volatile u32 *uart_lcr = (volatile u32*)(UART0_ADDR+UART_LCR);
+       volatile u32 *sys_powerctrl = (u32 *)SYS_POWERCTRL;
+       int sd;
+       int divisorx2;
+
+       /* sd is system clock divisor                   */
+       /* see section 10.4.5 in au1550 datasheet       */
+       sd = (*sys_powerctrl & 0x03) + 2;
+
+       /* calulate 2x baudrate and round */
+       divisorx2 = ((CFG_HZ/(sd * 16 * CONFIG_BAUDRATE)));
+
+       if (divisorx2 & 0x01)
+               divisorx2 = divisorx2 + 1;
+
+       *uart_clk = divisorx2 / 2;
+
+       /* Set parity, stop bits and word length to 8N1 */
+       *uart_lcr = UART_LCR_WLEN8;
+}
+
+void serial_putc (const char c)
+{
+       volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
+       volatile u32 *uart_tx = (volatile u32*)(UART0_ADDR+UART_TX);
+
+       if (c == '\n') serial_putc ('\r');
+
+       /* Wait for fifo to shift out some bytes */
+       while((*uart_lsr&UART_LSR_THRE)==0);
+
+       *uart_tx = (u32)c;
+}
+
+void serial_puts (const char *s)
+{
+       while (*s)
+       {
+               serial_putc (*s++);
+       }
+}
+
+int serial_getc (void)
+{
+       volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
+       char c;
+
+       while (!serial_tstc());
+
+       c = (*uart_rx&0xFF);
+       return c;
+}
+
+int serial_tstc (void)
+{
+       volatile u32 *uart_lsr = (volatile u32*)(UART0_ADDR+UART_LSR);
+
+       if(*uart_lsr&UART_LSR_DR){
+               /* Data in rfifo */
+               return(1);
+       }
+       return 0;
+}
+#endif /* CONFIG_SERIAL_AU1X00 */