-/*
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the Danube reference board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* #define DEBUG */
-
-#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */
-#define CONFIG_MIPS24KEC 1 /* MIPS 24KEc CPU core */
-#define CONFIG_DANUBE 1 /* in a Danube/Twinpass Chip */
-#define CONFIG_ARV752DWP22 1 /* on the arv752DWP22 Board */
-
-#define CONFIG_SYS_MIPS_MULTI_CPU 1 /* This is a multi cpu system */
-
-#define CONFIG_USE_DDR_RAM
-#define CONFIG_SYS_MAX_RAM 64*1024*1024
-
-#define CONFIG_FLASH_CFI_DRIVER 1
-
-#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
-
-#ifdef CONFIG_SYS_RAMBOOT
- //#warning CONFIG_SYS_RAMBOOT
- #define CONFIG_SKIP_LOWLEVEL_INIT
-#else /* CONFIG_SYS_RAMBOOT */
- #define CONFIG_SYS_EBU_BOOT
- #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#if 1
-#ifndef CPU_CLOCK_RATE
-#define CPU_CLOCK_RATE (ifx_get_cpuclk())
-#endif
-#endif
-
-#define CONFIG_SYS_PROMPT "ARV752DWP22 => " /* Monitor Command Prompt */
-
-#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
-
-/*
- * Include common defines/options for all Infineon boards
- */
-#include "ifx-common.h"
-
-
-#undef CONFIG_EXTRA_ENV_SETTINGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "ram_addr=0x80500000\0" \
- "kernel_addr=0xb0050000\0" \
- "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
- "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath} \0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off\0" \
- "addmisc=setenv bootargs ${bootargs} init=/etc/preinit " \
- "console=ttyS1,115200 ethaddr=${ethaddr} " \
- "${mtdparts}\0" \
- "flash_flash=run flashargs addip addmisc;" \
- "bootm ${kernel_addr}\0" \
- "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \
- "net_flash=run load_kernel flashargs addip addmisc;" \
- "bootm ${ram_addr}\0" \
- "net_nfs=run load_kernel nfsargs addip addmisc;" \
- "bootm ${ram_addr}\0" \
- "load_kernel=tftp ${ram_addr} " \
- "${tftppath}openwrt-ifxmips-uImage\0" \
- "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
- "cp.b 0x80500000 0xb0000000 ${filesize}\0" \
- "update_openwrt=tftp ${ram_addr} " \
- "${tftppath}openwrt-ifxmips-squashfs.image;" \
- "era ${kernel_addr} +${filesize};" \
- "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
-
-/*
- * Cache Configuration (cpu/chip specific, Danube)
- */
-#define CONFIG_SYS_DCACHE_SIZE 16384
-#define CONFIG_SYS_ICACHE_SIZE 16384
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA
-
-#define CONFIG_NET_MULTI
-#if 0
-#define CONFIG_M4530_ETH
-#define CONFIG_M4530_FPGA
-#endif
-
-#define CONFIG_IFX_ETOP
-//#define CLK_OUT2_25MHZ
-#define CONFIG_EXTRA_SWITCH
-
-//#define CONFIG_RMII /* use interface in RMII mode */
-
-#define CONFIG_MII
-#define CONFIG_CMD_MII
-
-#define CONFIG_IFX_ASC
-
-#ifdef CONFIG_USE_ASC0
-#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400
-#else
-#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00
-#endif
-
-#ifdef CONFIG_SYS_RAMBOOT
-/* Configuration of EBU: */
-/* starting address from 0xb0000000 */
-/* make the flash available from RAM boot */
-# define CONFIG_EBU_ADDSEL0 0x10000031
-# define CONFIG_EBU_BUSCON0 0x0001D7FF
-# define CONFIG_EBU_ADDSEL1 0x14000001
-# define CONFIG_EBU_BUSCON1 0x4041D7FD
-#endif
-
-#define CONFIG_CMD_HTTPD /* enable upgrade via HTTPD */
-
-//#define CONFIG_ETHADDR 00:13:f7:df:1c:80
-//#define CONFIG_ETHADDR 11:22:33:44:55:66
-#define CONFIG_IPADDR 192.168.2.1
-#define CONFIG_SERVERIP 192.168.2.101
-#define CONFIG_GATEWAYIP 192.168.2.254
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_ROOTPATH "/export"
-
-#endif /* __CONFIG_H */
projects / openwrt / svn-archive / archive.git / blobdiff