--- /dev/null
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the Danube reference board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* #define DEBUG */
+
+#define CONFIG_MIPS32 1 /* MIPS32 CPU compatible */
+#define CONFIG_MIPS24KEC 1 /* MIPS 24KEc CPU core */
+#define CONFIG_DANUBE 1 /* in a Danube/Twinpass Chip */
+#define CONFIG_ARV752DWP22 1 /* on the arv752DWP22 Board */
+
+#define CONFIG_SYS_MIPS_MULTI_CPU 1 /* This is a multi cpu system */
+
+#define CONFIG_USE_DDR_RAM
+#define CONFIG_SYS_MAX_RAM 64*1024*1024
+
+#define CONFIG_FLASH_CFI_DRIVER 1
+
+#define CONFIG_SYS_INIT_RAM_LOCK_MIPS
+
+#ifdef CONFIG_SYS_RAMBOOT
+ //#warning CONFIG_SYS_RAMBOOT
+ #define CONFIG_SKIP_LOWLEVEL_INIT
+#else /* CONFIG_SYS_RAMBOOT */
+ #define CONFIG_SYS_EBU_BOOT
+ #define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */
+#endif /* CONFIG_SYS_RAMBOOT */
+
+#if 1
+#ifndef CPU_CLOCK_RATE
+#define CPU_CLOCK_RATE (ifx_get_cpuclk())
+#endif
+#endif
+
+#define CONFIG_SYS_PROMPT "ARV752DWP22 => " /* Monitor Command Prompt */
+
+#undef CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
+
+/*
+ * Include common defines/options for all Infineon boards
+ */
+#include "ifx-common.h"
+
+
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "ram_addr=0x80500000\0" \
+ "kernel_addr=0xb0050000\0" \
+ "mtdparts=mtdparts=ifx-nor:256k(uboot)ro,64k(uboot_env)ro,64k(kernel),-(rootfs)\0" \
+ "flashargs=setenv bootargs rootfstype=squashfs,jffs2\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath} \0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off\0" \
+ "addmisc=setenv bootargs ${bootargs} init=/etc/preinit " \
+ "console=ttyS1,115200 ethaddr=${ethaddr} " \
+ "${mtdparts}\0" \
+ "flash_flash=run flashargs addip addmisc;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \
+ "net_flash=run load_kernel flashargs addip addmisc;" \
+ "bootm ${ram_addr}\0" \
+ "net_nfs=run load_kernel nfsargs addip addmisc;" \
+ "bootm ${ram_addr}\0" \
+ "load_kernel=tftp ${ram_addr} " \
+ "${tftppath}openwrt-ifxmips-uImage\0" \
+ "update_uboot=tftp 0x80500000 ${tftppath}u-boot.bin;era 0xb0000000 +${filesize};" \
+ "cp.b 0x80500000 0xb0000000 ${filesize}\0" \
+ "update_openwrt=tftp ${ram_addr} " \
+ "${tftppath}openwrt-ifxmips-squashfs.image;" \
+ "era ${kernel_addr} +${filesize};" \
+ "cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
+
+/*
+ * Cache Configuration (cpu/chip specific, Danube)
+ */
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
+#define CONFIG_SYS_MIPS_CACHE_OPER_MODE CONF_CM_CACHABLE_NO_WA
+
+#define CONFIG_NET_MULTI
+#if 0
+#define CONFIG_M4530_ETH
+#define CONFIG_M4530_FPGA
+#endif
+
+#define CONFIG_IFX_ETOP
+//#define CLK_OUT2_25MHZ
+#define CONFIG_EXTRA_SWITCH
+
+//#define CONFIG_RMII /* use interface in RMII mode */
+
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+
+#define CONFIG_IFX_ASC
+
+#ifdef CONFIG_USE_ASC0
+#define CONFIG_SYS_IFX_ASC_BASE 0x1E100400
+#else
+#define CONFIG_SYS_IFX_ASC_BASE 0x1E100C00
+#endif
+
+#ifdef CONFIG_SYS_RAMBOOT
+/* Configuration of EBU: */
+/* starting address from 0xb0000000 */
+/* make the flash available from RAM boot */
+# define CONFIG_EBU_ADDSEL0 0x10000031
+# define CONFIG_EBU_BUSCON0 0x0001D7FF
+# define CONFIG_EBU_ADDSEL1 0x14000001
+# define CONFIG_EBU_BUSCON1 0x4041D7FD
+#endif
+
+#define CONFIG_CMD_HTTPD /* enable upgrade via HTTPD */
+
+//#define CONFIG_ETHADDR 00:13:f7:df:1c:80
+//#define CONFIG_ETHADDR 11:22:33:44:55:66
+#define CONFIG_IPADDR 192.168.2.1
+#define CONFIG_SERVERIP 192.168.2.101
+#define CONFIG_GATEWAYIP 192.168.2.254
+#define CONFIG_NETMASK 255.255.255.0
+#define CONFIG_ROOTPATH "/export"
+
+#endif /* __CONFIG_H */
projects / openwrt / svn-archive / archive.git / blobdiff