[adm5120] experimental support for 2.6.27

[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files-2.6.26 / arch / mips / adm5120 / common / setup.c

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/common/setup.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/common/setup.c
deleted file mode 100644 (file)
index 0a11774..0000000
--- a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/common/setup.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  ADM5120 specific setup
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_board.h>
-
-void (*adm5120_board_reset)(void);
-
-static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
-       [ADM5120_PROM_GENERIC]          = "Generic",
-       [ADM5120_PROM_CFE]              = "CFE",
-       [ADM5120_PROM_UBOOT]            = "U-Boot",
-       [ADM5120_PROM_MYLOADER]         = "MyLoader",
-       [ADM5120_PROM_ROUTERBOOT]       = "RouterBOOT",
-       [ADM5120_PROM_BOOTBASE]         = "Bootbase"
-};
-
-static void __init adm5120_report(void)
-{
-       printk(KERN_INFO "SoC      : ADM%04X%s revision %d, running "
-               "at %ldMHz\n",
-               adm5120_product_code,
-               adm5120_package_bga() ? "" : "P",
-               adm5120_revision, (adm5120_speed / 1000000));
-       printk(KERN_INFO "Bootdev  : %s flash\n",
-               adm5120_nand_boot ? "NAND":"NOR");
-       printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
-}
-
-static void adm5120_restart(char *command)
-{
-       /* TODO: stop switch before reset */
-
-       if (adm5120_board_reset)
-               adm5120_board_reset();
-
-       SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
-}
-
-static void adm5120_halt(void)
-{
-       local_irq_disable();
-
-       while (1) {
-               if (cpu_wait)
-                       cpu_wait();
-       }
-}
-
-void __init plat_time_init(void)
-{
-       mips_hpt_frequency = adm5120_speed / 2;
-}
-
-void __init plat_mem_setup(void)
-{
-       adm5120_soc_init();
-       adm5120_mem_init();
-       adm5120_report();
-
-       _machine_restart = adm5120_restart;
-       _machine_halt = adm5120_halt;
-       pm_power_off = adm5120_halt;
-
-       set_io_port_base(KSEG1);
-}