[adm5120] add 2.6.26 specific files

[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files-2.6.26 / arch / mips / adm5120 / compex / wp54.c

diff --git a/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/compex/wp54.c b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/compex/wp54.c
new file mode 100644 (file)
index 0000000..0446809
--- /dev/null
+++ b/target/linux/adm5120/files-2.6.26/arch/mips/adm5120/compex/wp54.c
@@ -0,0 +1,94 @@
+/*
+ *  Compex WP54 board support
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include "compex.h"
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wp54g_wrt_partitions[] = {
+       {
+               .name   = "cfe",
+               .offset = 0,
+               .size   = 0x050000,
+               .mask_flags = MTD_WRITEABLE,
+       } , {
+               .name   = "trx",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 0x3A0000,
+       } , {
+               .name   = "nvram",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 0x010000,
+       }
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
+       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
+};
+
+static struct gpio_button wp54_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset_button",
+               .type           = EV_KEY,
+               .code           = BTN_0,
+               .threshold      = 5,
+               .gpio           = ADM5120_GPIO_PIN2,
+       }
+};
+
+static struct gpio_led wp54_gpio_leds[] __initdata = {
+       GPIO_LED_INV(ADM5120_GPIO_PIN2, "diag", NULL),
+       GPIO_LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL),
+       GPIO_LED_INV(ADM5120_GPIO_PIN7, "wan",  NULL),
+       GPIO_LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL),
+       GPIO_LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL),
+};
+
+static u8 wp54_vlans[6] __initdata = {
+       0x41, 0x42, 0x00, 0x00, 0x00, 0x00
+};
+
+static void wp54_reset(void)
+{
+       gpio_set_value(ADM5120_GPIO_PIN3, 0);
+}
+
+static void __init wp54_setup(void)
+{
+       compex_generic_setup();
+
+       /* setup reset line */
+       gpio_request(ADM5120_GPIO_PIN3, NULL);
+       gpio_direction_output(ADM5120_GPIO_PIN3, 1);
+       adm5120_board_reset = wp54_reset;
+
+       adm5120_add_device_switch(2, wp54_vlans);
+       adm5120_add_device_gpio_buttons(ARRAY_SIZE(wp54_gpio_buttons),
+                                       wp54_gpio_buttons);
+       adm5120_add_device_gpio_leds(ARRAY_SIZE(wp54_gpio_leds),
+                                       wp54_gpio_leds);
+
+       adm5120_pci_set_irq_map(ARRAY_SIZE(wp54_pci_irqs), wp54_pci_irqs);
+}
+
+ADM5120_BOARD(MACH_ADM5120_WP54, "Compex WP54 family", wp54_setup);
+
+static void __init wp54_wrt_setup(void)
+{
+#ifdef CONFIG_MTD_PARTITIONS
+       adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
+       adm5120_flash0_data.parts = wp54g_wrt_partitions;
+#endif
+
+       wp54_setup();
+}
+
+ADM5120_BOARD(MACH_ADM5120_WP54G_WRT, "Compex WP54G-WRT", wp54_wrt_setup);