adm5120: add 3.18 support
[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files-3.18 / drivers / ata / pata_rb153_cf.c
diff --git a/target/linux/adm5120/files-3.18/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files-3.18/drivers/ata/pata_rb153_cf.c
new file mode 100644 (file)
index 0000000..92a4d13
--- /dev/null
@@ -0,0 +1,267 @@
+/*
+ *  A low-level PATA driver to handle a Compact Flash connected on the
+ *  Mikrotik's RouterBoard 153 board.
+ *
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on: drivers/ata/pata_ixp4xx_cf.c
+ *     Copyright (C) 2006-07 Tower Technologies
+ *     Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ *  Also was based on the driver for Linux 2.4.xx published by Mikrotik for
+ *  their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
+ *  seems not to have a license.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <linux/libata.h>
+#include <scsi/scsi_host.h>
+
+#define DRV_NAME       "pata-rb153-cf"
+#define DRV_VERSION    "0.5.0"
+#define DRV_DESC       "PATA driver for RouterBOARD 153 Compact Flash"
+
+#define RB153_CF_MAXPORTS      1
+#define RB153_CF_IO_DELAY      100
+
+#define RB153_CF_REG_CMD       0x0800
+#define RB153_CF_REG_CTRL      0x080E
+#define RB153_CF_REG_DATA      0x0C00
+
+struct rb153_cf_info {
+       void __iomem    *iobase;
+       unsigned int    gpio_line;
+       int             frozen;
+       unsigned int    irq;
+};
+
+static inline void rb153_pata_finish_io(struct ata_port *ap)
+{
+       struct rb153_cf_info *info = ap->host->private_data;
+
+       /* FIXME: Keep previous delay. If this is merely a fence then
+        * ata_sff_sync might be sufficient. */
+       ata_sff_dma_pause(ap);
+       ndelay(RB153_CF_IO_DELAY);
+
+       irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+}
+
+static void rb153_pata_exec_command(struct ata_port *ap,
+                                       const struct ata_taskfile *tf)
+{
+       writeb(tf->command, ap->ioaddr.command_addr);
+       rb153_pata_finish_io(ap);
+}
+
+static unsigned int rb153_pata_data_xfer(struct ata_device *adev,
+                                       unsigned char *buf,
+                                       unsigned int buflen,
+                                       int write_data)
+{
+       void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr;
+       unsigned int t;
+
+       t = buflen;
+       if (write_data) {
+               for (; t > 0; t--, buf++)
+                       writeb(*buf, ioaddr);
+       } else {
+               for (; t > 0; t--, buf++)
+                       *buf = readb(ioaddr);
+       }
+
+       rb153_pata_finish_io(adev->link->ap);
+       return buflen;
+}
+
+static void rb153_pata_freeze(struct ata_port *ap)
+{
+       struct rb153_cf_info *info = ap->host->private_data;
+
+       info->frozen = 1;
+}
+
+static void rb153_pata_thaw(struct ata_port *ap)
+{
+       struct rb153_cf_info *info = ap->host->private_data;
+
+       info->frozen = 0;
+}
+
+static irqreturn_t rb153_pata_irq_handler(int irq, void *dev_instance)
+{
+       struct ata_host *ah = dev_instance;
+       struct rb153_cf_info *info = ah->private_data;
+
+       if (gpio_get_value(info->gpio_line)) {
+               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
+               if (!info->frozen)
+                       ata_sff_interrupt(irq, dev_instance);
+       } else {
+               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
+       }
+
+       return IRQ_HANDLED;
+}
+
+static struct ata_port_operations rb153_pata_port_ops = {
+       .inherits               = &ata_sff_port_ops,
+       .sff_exec_command       = rb153_pata_exec_command,
+       .sff_data_xfer          = rb153_pata_data_xfer,
+       .freeze                 = rb153_pata_freeze,
+       .thaw                   = rb153_pata_thaw,
+};
+
+static struct scsi_host_template rb153_pata_sht = {
+       ATA_PIO_SHT(DRV_NAME),
+};
+
+static void rb153_pata_setup_port(struct ata_host *ah)
+{
+       struct rb153_cf_info *info = ah->private_data;
+       struct ata_port *ap;
+
+       ap = ah->ports[0];
+
+       ap->ops         = &rb153_pata_port_ops;
+       ap->pio_mask    = 0x1f; /* PIO4 */
+
+       ap->ioaddr.cmd_addr     = info->iobase + RB153_CF_REG_CMD;
+       ap->ioaddr.ctl_addr     = info->iobase + RB153_CF_REG_CTRL;
+       ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL;
+
+       ata_sff_std_ports(&ap->ioaddr);
+
+       ap->ioaddr.data_addr = info->iobase + RB153_CF_REG_DATA;
+}
+
+static int rb153_pata_driver_probe(struct platform_device *pdev)
+{
+       unsigned int irq;
+       int gpio;
+       struct resource *res;
+       struct ata_host *ah;
+       struct rb153_cf_info *info;
+       int ret;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "no IOMEM resource found\n");
+               return -EINVAL;
+       }
+
+       irq = platform_get_irq(pdev, 0);
+       if (irq <= 0) {
+               dev_err(&pdev->dev, "no IRQ resource found\n");
+               return -ENOENT;
+       }
+
+       gpio = irq_to_gpio(irq);
+       if (gpio < 0) {
+               dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
+               return -ENOENT;
+       }
+
+       ret = gpio_request(gpio, DRV_NAME);
+       if (ret) {
+               dev_err(&pdev->dev, "GPIO request failed\n");
+               return ret;
+       }
+
+       ah = ata_host_alloc(&pdev->dev, RB153_CF_MAXPORTS);
+       if (!ah)
+               return -ENOMEM;
+
+       platform_set_drvdata(pdev, ah);
+
+       info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+       if (!info)
+               return -ENOMEM;
+
+       ah->private_data = info;
+       info->gpio_line = gpio;
+       info->irq = irq;
+
+       info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
+                               res->end - res->start + 1);
+       if (!info->iobase)
+               return -ENOMEM;
+
+       ret = gpio_direction_input(gpio);
+       if (ret) {
+               dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
+                               ret);
+               goto err_free_gpio;
+       }
+
+       rb153_pata_setup_port(ah);
+
+       ret = ata_host_activate(ah, irq, rb153_pata_irq_handler,
+                               IRQF_TRIGGER_LOW, &rb153_pata_sht);
+       if (ret)
+               goto err_free_gpio;
+
+       return 0;
+
+err_free_gpio:
+       gpio_free(gpio);
+
+       return ret;
+}
+
+static int rb153_pata_driver_remove(struct platform_device *pdev)
+{
+       struct ata_host *ah = platform_get_drvdata(pdev);
+       struct rb153_cf_info *info = ah->private_data;
+
+       ata_host_detach(ah);
+       gpio_free(info->gpio_line);
+
+       return 0;
+}
+
+static struct platform_driver rb153_pata_platform_driver = {
+       .probe          = rb153_pata_driver_probe,
+       .remove         = rb153_pata_driver_remove,
+       .driver  = {
+               .name   = DRV_NAME,
+               .owner  = THIS_MODULE,
+       },
+};
+
+/* ------------------------------------------------------------------------ */
+
+#define DRV_INFO DRV_DESC " version " DRV_VERSION
+
+static int __init rb153_pata_module_init(void)
+{
+       printk(KERN_INFO DRV_INFO "\n");
+
+       return platform_driver_register(&rb153_pata_platform_driver);
+}
+
+static void __exit rb153_pata_module_exit(void)
+{
+       platform_driver_unregister(&rb153_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL v2");
+
+module_init(rb153_pata_module_init);
+module_exit(rb153_pata_module_exit);