adm5120: add 3.18 support
[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files-3.18 / drivers / usb / host / adm5120-hub.c
diff --git a/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files-3.18/drivers/usb/host/adm5120-hub.c
new file mode 100644 (file)
index 0000000..8cabaf9
--- /dev/null
@@ -0,0 +1,430 @@
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-hub.c
+ *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * ADM5120 Root Hub ... the nonsharable stuff
+ */
+
+#define dbg_port(hc, label, num, value) \
+       admhc_dbg(hc, \
+               "%s port%d " \
+               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+               label, num, value, \
+               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
+               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
+               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
+               (value & ADMHC_PS_PESC) ? " PESC" : "", \
+               (value & ADMHC_PS_CSC) ? " CSC" : "", \
+               \
+               (value & ADMHC_PS_LSDA) ? " LSDA" : "", \
+               (value & ADMHC_PS_PPS) ? " PPS" : "", \
+               (value & ADMHC_PS_PRS) ? " PRS" : "", \
+               (value & ADMHC_PS_POCI) ? " POCI" : "", \
+               (value & ADMHC_PS_PSS) ? " PSS" : "", \
+               \
+               (value & ADMHC_PS_PES) ? " PES" : "", \
+               (value & ADMHC_PS_CCS) ? " CCS" : "" \
+               );
+
+#define dbg_port_write(hc, label, num, value) \
+       admhc_dbg(hc, \
+               "%s port%d " \
+               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+               label, num, value, \
+               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
+               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
+               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
+               (value & ADMHC_PS_PESC) ? " PESC" : "", \
+               (value & ADMHC_PS_CSC) ? " CSC" : "", \
+               \
+               (value & ADMHC_PS_CPP) ? " CPP" : "", \
+               (value & ADMHC_PS_SPP) ? " SPP" : "", \
+               (value & ADMHC_PS_SPR) ? " SPR" : "", \
+               (value & ADMHC_PS_CPS) ? " CPS" : "", \
+               (value & ADMHC_PS_SPS) ? " SPS" : "", \
+               \
+               (value & ADMHC_PS_SPE) ? " SPE" : "", \
+               (value & ADMHC_PS_CPE) ? " CPE" : "" \
+               );
+
+/*-------------------------------------------------------------------------*/
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int
+admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
+       int             i, changed = 0, length = 1;
+       int             any_connected = 0;
+       unsigned long   flags;
+       u32             status;
+
+       spin_lock_irqsave(&ahcd->lock, flags);
+       if (!HCD_HW_ACCESSIBLE(hcd))
+               goto done;
+
+       /* init status */
+       status = admhc_read_rhdesc(ahcd);
+       if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
+               buf[0] = changed = 1;
+       else
+               buf[0] = 0;
+       if (ahcd->num_ports > 7) {
+               buf[1] = 0;
+               length++;
+       }
+
+       /* look at each port */
+       for (i = 0; i < ahcd->num_ports; i++) {
+               status = admhc_read_portstatus(ahcd, i);
+
+               /* can't autostop if ports are connected */
+               any_connected |= (status & ADMHC_PS_CCS);
+
+               if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
+                               | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
+                       changed = 1;
+                       if (i < 7)
+                               buf[0] |= 1 << (i + 1);
+                       else
+                               buf[1] |= 1 << (i - 7);
+               }
+       }
+
+       if (admhc_root_hub_state_changes(ahcd, changed,
+                       any_connected))
+               set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+       else
+               clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+
+done:
+       spin_unlock_irqrestore(&ahcd->lock, flags);
+
+       return changed ? length : 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf)
+{
+       struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
+       u32 rh = admhc_read_rhdesc(ahcd);
+       u16 temp;
+
+       desc->bDescriptorType = USB_DT_HUB;     /* Hub-descriptor */
+       desc->bPwrOn2PwrGood = ADMHC_POTPGT/2;  /* use default value */
+       desc->bHubContrCurrent = 0x00;          /* 0mA */
+
+       desc->bNbrPorts = ahcd->num_ports;
+       temp = 1 + (ahcd->num_ports / 8);
+       desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
+
+       /* FIXME */
+       temp = 0;
+       if (rh & ADMHC_RH_NPS)          /* no power switching? */
+           temp |= 0x0002;
+       if (rh & ADMHC_RH_PSM)          /* per-port power switching? */
+           temp |= 0x0001;
+       if (rh & ADMHC_RH_NOCP)         /* no overcurrent reporting? */
+           temp |= 0x0010;
+       else if (rh & ADMHC_RH_OCPM)    /* per-port overcurrent reporting? */
+           temp |= 0x0008;
+       desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
+
+       /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+       desc->u.hs.DeviceRemovable[0] = 0;
+       desc->u.hs.DeviceRemovable[0] = ~0;
+
+       return 0;
+}
+
+static int admhc_get_hub_status(struct admhcd *ahcd, char *buf)
+{
+       struct usb_hub_status *hs = (struct usb_hub_status *)buf;
+       u32 t = admhc_read_rhdesc(ahcd);
+       u16 status, change;
+
+       status = 0;
+       status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0;
+       status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0;
+
+       change = 0;
+       change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0;
+       change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0;
+
+       hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status);
+       hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change);
+
+       return 0;
+}
+
+static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf)
+{
+       struct usb_port_status *ps = (struct usb_port_status *)buf;
+       u32 t = admhc_read_portstatus(ahcd, port);
+       u16 status, change;
+
+       status = 0;
+       status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0;
+       status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0;
+       status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0;
+       status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0;
+       status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0;
+       status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0;
+       status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0;
+
+       change = 0;
+       change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0;
+       change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0;
+       change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0;
+       change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0;
+       change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0;
+
+       ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status);
+       ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change);
+
+       return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_OTG
+
+static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
+       u32                     status;
+
+       if (!port)
+               return -EINVAL;
+       port--;
+
+       /* start port reset before HNP protocol times out */
+       status = admhc_read_portstatus(ahcd, port);
+       if (!(status & ADMHC_PS_CCS))
+               return -ENODEV;
+
+       /* khubd will finish the reset later */
+       admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS);
+       return 0;
+}
+
+static void start_hnp(struct admhcd *ahcd);
+
+#else
+
+#define        admhc_start_port_reset          NULL
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+
+/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
+ * not necessarily continuous ... to guard against resume signaling.
+ * The short timeout is safe for non-root hubs, and is backward-compatible
+ * with earlier Linux hosts.
+ */
+#ifdef CONFIG_USB_SUSPEND
+#define        PORT_RESET_MSEC         50
+#else
+#define        PORT_RESET_MSEC         10
+#endif
+
+/* this timer value might be vendor-specific ... */
+#define        PORT_RESET_HW_MSEC      10
+
+/* wrap-aware logic morphed from <linux/jiffies.h> */
+#define tick_before(t1, t2) ((s16)(((s16)(t1)) - ((s16)(t2))) < 0)
+
+/* called from some task, normally khubd */
+static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)
+{
+       u32 t;
+
+       admhc_vdbg(ahcd, "reset port%d\n", port);
+       t = admhc_read_portstatus(ahcd, port);
+       if (!(t & ADMHC_PS_CCS))
+               return -ENODEV;
+
+       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR);
+       mdelay(10);
+       admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC));
+       mdelay(100);
+
+       return 0;
+}
+
+static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port)
+{
+       u32 t;
+
+       admhc_vdbg(ahcd, "enable port%d\n", port);
+       t = admhc_read_portstatus(ahcd, port);
+       if (!(t & ADMHC_PS_CCS))
+               return -ENODEV;
+
+       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE);
+
+       return 0;
+}
+
+static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port)
+{
+       u32 t;
+
+       admhc_vdbg(ahcd, "disable port%d\n", port);
+       t = admhc_read_portstatus(ahcd, port);
+       if (!(t & ADMHC_PS_CCS))
+               return -ENODEV;
+
+       admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE);
+
+       return 0;
+}
+
+static inline int admhc_port_write(struct admhcd *ahcd, unsigned port,
+               u32 val)
+{
+#ifdef ADMHC_VERBOSE_DEBUG
+       dbg_port_write(ahcd, "write", port, val);
+#endif
+       admhc_write_portstatus(ahcd, port, val);
+
+       return 0;
+}
+
+static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+               u16 wIndex, char *buf, u16 wLength)
+{
+       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
+       int             ports = ahcd->num_ports;
+       int             ret = 0;
+
+       if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
+               return -ESHUTDOWN;
+
+       switch (typeReq) {
+       case ClearHubFeature:
+               switch (wValue) {
+               case C_HUB_OVER_CURRENT:
+#if 0                  /* FIXME */
+                       admhc_writel(ahcd, ADMHC_RH_OCIC,
+                                       &ahcd->regs->roothub.status);
+#endif
+               case C_HUB_LOCAL_POWER:
+                       break;
+               default:
+                       goto error;
+               }
+               break;
+       case ClearPortFeature:
+               if (!wIndex || wIndex > ports)
+                       goto error;
+               wIndex--;
+
+               switch (wValue) {
+               case USB_PORT_FEAT_ENABLE:
+                       ret = admhc_port_disable(ahcd, wIndex);
+                       break;
+               case USB_PORT_FEAT_SUSPEND:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS);
+                       break;
+               case USB_PORT_FEAT_POWER:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP);
+                       break;
+               case USB_PORT_FEAT_C_CONNECTION:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC);
+                       break;
+               case USB_PORT_FEAT_C_ENABLE:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC);
+                       break;
+               case USB_PORT_FEAT_C_SUSPEND:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC);
+                       break;
+               case USB_PORT_FEAT_C_OVER_CURRENT:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC);
+                       break;
+               case USB_PORT_FEAT_C_RESET:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC);
+                       break;
+               default:
+                       goto error;
+               }
+               break;
+       case GetHubDescriptor:
+               ret = admhc_get_hub_descriptor(ahcd, buf);
+               break;
+       case GetHubStatus:
+               ret = admhc_get_hub_status(ahcd, buf);
+               break;
+       case GetPortStatus:
+               if (!wIndex || wIndex > ports)
+                       goto error;
+               wIndex--;
+
+               ret = admhc_get_port_status(ahcd, wIndex, buf);
+               break;
+       case SetHubFeature:
+               switch (wValue) {
+               case C_HUB_OVER_CURRENT:
+                       /* FIXME:  this can be cleared, yes? */
+               case C_HUB_LOCAL_POWER:
+                       break;
+               default:
+                       goto error;
+               }
+               break;
+       case SetPortFeature:
+               if (!wIndex || wIndex > ports)
+                       goto error;
+               wIndex--;
+
+               switch (wValue) {
+               case USB_PORT_FEAT_ENABLE:
+                       ret = admhc_port_enable(ahcd, wIndex);
+                       break;
+               case USB_PORT_FEAT_RESET:
+                       ret = admhc_port_reset(ahcd, wIndex);
+                       break;
+               case USB_PORT_FEAT_SUSPEND:
+#ifdef CONFIG_USB_OTG
+                       if (hcd->self.otg_port == (wIndex + 1)
+                                       && hcd->self.b_hnp_enable)
+                               start_hnp(ahcd);
+                       else
+#endif
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS);
+                       break;
+               case USB_PORT_FEAT_POWER:
+                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP);
+                       break;
+               default:
+                       goto error;
+               }
+               break;
+
+       default:
+error:
+               /* "protocol stall" on error */
+               ret = -EPIPE;
+       }
+
+       return ret;
+}
+