adm5120: drop 3.8 and 3.14 support

[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files-3.8 / arch / mips / adm5120 / mikrotik / rb-1xx.c

diff --git a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c b/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c
deleted file mode 100644 (file)
index 8961115..0000000
--- a/target/linux/adm5120/files-3.8/arch/mips/adm5120/mikrotik/rb-1xx.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- *  Mikrotik RouterBOARD 1xx series support
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  NAND initialization code was based on a driver for Linux 2.6.19+ which
- *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series boards.
- *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "rb-1xx.h"
-
-#define RB1XX_NAND_CHIP_DELAY  25
-
-#define RB1XX_KEYS_POLL_INTERVAL       20
-#define RB1XX_KEYS_DEBOUNCE_INTERVAL   (3 * RB1XX_KEYS_POLL_INTERVAL)
-
-static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
-       PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition rb1xx_nor_parts[] = {
-       {
-               .name   = "booter",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct mtd_partition rb1xx_nand_parts[] = {
-       {
-               .name   = "kernel",
-               .offset = 0,
-               .size   = 4 * 1024 * 1024,
-       } , {
-               .name   = "rootfs",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = MTDPART_SIZ_FULL
-       }
-};
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.  So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb1xx_nand_ecclayout = {
-       .eccbytes       = 6,
-       .eccpos         = { 8, 9, 10, 13, 14, 15 },
-       .oobavail       = 9,
-       .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-/*--------------------------------------------------------------------------*/
-
-static int rb1xx_nand_fixup(struct mtd_info *mtd)
-{
-       struct nand_chip *chip = mtd->priv;
-
-       if (mtd->writesize == 512)
-               chip->ecc.layout = &rb1xx_nand_ecclayout;
-
-       return 0;
-}
-
-struct platform_nand_data rb1xx_nand_data __initdata = {
-       .chip = {
-               .nr_chips       = 1,
-               .nr_partitions  = ARRAY_SIZE(rb1xx_nand_parts),
-               .partitions     = rb1xx_nand_parts,
-               .chip_delay     = RB1XX_NAND_CHIP_DELAY,
-               .chip_fixup     = rb1xx_nand_fixup,
-       },
-};
-
-struct gpio_keys_button rb1xx_gpio_buttons[] __initdata = {
-       {
-               .desc           = "reset_button",
-               .type           = EV_KEY,
-               .code           = KEY_RESTART,
-               .debounce_interval = RB1XX_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = ADM5120_GPIO_PIN7,
-       }
-};
-
-static void __init rb1xx_mac_setup(void)
-{
-       if (rb_hs.mac_base != NULL && is_valid_ether_addr(rb_hs.mac_base)) {
-               adm5120_setup_eth_macs(rb_hs.mac_base);
-       } else {
-               u8 mac[ETH_ALEN];
-
-               random_ether_addr(mac);
-               adm5120_setup_eth_macs(mac);
-       }
-}
-
-void __init rb1xx_add_device_flash(void)
-{
-       /* setup data for flash0 device */
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
-       adm5120_flash0_data.parts = rb1xx_nor_parts;
-       adm5120_flash0_data.window_size = 128*1024;
-
-       adm5120_add_device_flash(0);
-}
-
-void __init rb1xx_add_device_nand(void)
-{
-       /* enable NAND flash interface */
-       adm5120_nand_enable();
-
-       /* initialize NAND chip */
-       adm5120_nand_set_spn(1);
-       adm5120_nand_set_wpn(0);
-
-       adm5120_add_device_nand(&rb1xx_nand_data);
-}
-
-void __init rb1xx_generic_setup(void)
-{
-       if (adm5120_package_bga())
-               adm5120_pci_set_irq_map(ARRAY_SIZE(rb1xx_pci_irqs),
-                                       rb1xx_pci_irqs);
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_register_gpio_buttons(-1, RB1XX_KEYS_POLL_INTERVAL,
-                                     ARRAY_SIZE(rb1xx_gpio_buttons),
-                                     rb1xx_gpio_buttons);
-
-       rb1xx_add_device_flash();
-       rb1xx_mac_setup();
-}