--- /dev/null
+/*
+ * ADM5120 HCD (Host Controller Driver) for USB
+ *
+ * Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This file was derived from: drivers/usb/host/ohci-hcd.c
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * [ Initialisation is based on Linus' ]
+ * [ uhci code and gregs ahcd fragments ]
+ * [ (C) Copyright 1999 Linus Torvalds ]
+ * [ (C) Copyright 1999 Gregory P. Smith]
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/hcd.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/debugfs.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+#define DRIVER_VERSION "0.27.0"
+#define DRIVER_AUTHOR "Gabor Juhos <juhosg@openwrt.org>"
+#define DRIVER_DESC "ADMtek USB 1.1 Host Controller Driver"
+
+/*-------------------------------------------------------------------------*/
+
+#undef ADMHC_VERBOSE_DEBUG /* not always helpful */
+
+/* For initializing controller (mask in an HCFS mode too) */
+#define OHCI_CONTROL_INIT OHCI_CTRL_CBSR
+
+#define ADMHC_INTR_INIT \
+ (ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
+ | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI)
+
+/*-------------------------------------------------------------------------*/
+
+static const char hcd_name[] = "admhc-hcd";
+
+#define STATECHANGE_DELAY msecs_to_jiffies(300)
+
+#include "adm5120.h"
+
+static void admhc_dump(struct admhcd *ahcd, int verbose);
+static int admhc_init(struct admhcd *ahcd);
+static void admhc_stop(struct usb_hcd *hcd);
+
+#include "adm5120-dbg.c"
+#include "adm5120-mem.c"
+#include "adm5120-pm.c"
+#include "adm5120-hub.c"
+#include "adm5120-q.c"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * queue up an urb for anything except the root hub
+ */
+static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
+ gfp_t mem_flags)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct ed *ed;
+ struct urb_priv *urb_priv;
+ unsigned int pipe = urb->pipe;
+ int td_cnt = 0;
+ unsigned long flags;
+ int ret = 0;
+
+#ifdef ADMHC_VERBOSE_DEBUG
+ spin_lock_irqsave(&ahcd->lock, flags);
+ urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
+ spin_unlock_irqrestore(&ahcd->lock, flags);
+#endif
+
+ /* every endpoint has an ed, locate and maybe (re)initialize it */
+ ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
+ if (!ed)
+ return -ENOMEM;
+
+ /* for the private part of the URB we need the number of TDs */
+ switch (ed->type) {
+ case PIPE_CONTROL:
+ if (urb->transfer_buffer_length > TD_DATALEN_MAX)
+ /* td_submit_urb() doesn't yet handle these */
+ return -EMSGSIZE;
+
+ /* 1 TD for setup, 1 for ACK, plus ... */
+ td_cnt = 2;
+ /* FALLTHROUGH */
+ case PIPE_BULK:
+ /* one TD for every 4096 Bytes (can be up to 8K) */
+ td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
+ /* ... and for any remaining bytes ... */
+ if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
+ td_cnt++;
+ /* ... and maybe a zero length packet to wrap it up */
+ if (td_cnt == 0)
+ td_cnt++;
+ else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
+ && (urb->transfer_buffer_length
+ % usb_maxpacket(urb->dev, pipe,
+ usb_pipeout(pipe))) == 0)
+ td_cnt++;
+ break;
+ case PIPE_INTERRUPT:
+ /*
+ * for Interrupt IN/OUT transactions, each ED contains
+ * only 1 TD.
+ * TODO: check transfer_buffer_length?
+ */
+ td_cnt = 1;
+ break;
+ case PIPE_ISOCHRONOUS:
+ /* number of packets from URB */
+ td_cnt = urb->number_of_packets;
+ break;
+ }
+
+ urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
+ if (!urb_priv)
+ return -ENOMEM;
+
+ urb_priv->ed = ed;
+
+ spin_lock_irqsave(&ahcd->lock, flags);
+ /* don't submit to a dead HC */
+ if (!HCD_HW_ACCESSIBLE(hcd)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+ if (!HC_IS_RUNNING(hcd->state)) {
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ if (ret)
+ goto fail;
+
+ /* schedule the ed if needed */
+ if (ed->state == ED_IDLE) {
+ ret = ed_schedule(ahcd, ed);
+ if (ret < 0) {
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ goto fail;
+ }
+ if (ed->type == PIPE_ISOCHRONOUS) {
+ u16 frame = admhc_frame_no(ahcd);
+
+ /* delay a few frames before the first TD */
+ frame += max_t (u16, 8, ed->interval);
+ frame &= ~(ed->interval - 1);
+ frame |= ed->branch;
+ urb->start_frame = frame;
+
+ /* yes, only URB_ISO_ASAP is supported, and
+ * urb->start_frame is never used as input.
+ */
+ }
+ } else if (ed->type == PIPE_ISOCHRONOUS)
+ urb->start_frame = ed->last_iso + ed->interval;
+
+ /* fill the TDs and link them to the ed; and
+ * enable that part of the schedule, if needed
+ * and update count of queued periodic urbs
+ */
+ urb->hcpriv = urb_priv;
+ td_submit_urb(ahcd, urb);
+
+#ifdef ADMHC_VERBOSE_DEBUG
+ admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
+#endif
+
+fail:
+ if (ret)
+ urb_priv_free(ahcd, urb_priv);
+
+ spin_unlock_irqrestore(&ahcd->lock, flags);
+ return ret;
+}
+
+/*
+ * decouple the URB from the HC queues (TDs, urb_priv);
+ * reporting is always done
+ * asynchronously, and we might be dealing with an urb that's
+ * partially transferred, or an ED with other urbs being unlinked.
+ */
+static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
+ int status)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ahcd->lock, flags);
+
+#ifdef ADMHC_VERBOSE_DEBUG
+ urb_print(ahcd, urb, "DEQUEUE", 1, status);
+#endif
+ ret = usb_hcd_check_unlink_urb(hcd, urb, status);
+ if (ret) {
+ /* Do nothing */
+ ;
+ } else if (HC_IS_RUNNING(hcd->state)) {
+ struct urb_priv *urb_priv;
+
+ /* Unless an IRQ completed the unlink while it was being
+ * handed to us, flag it for unlink and giveback, and force
+ * some upcoming INTR_SF to call finish_unlinks()
+ */
+ urb_priv = urb->hcpriv;
+ if (urb_priv) {
+ if (urb_priv->ed->state == ED_OPER)
+ start_ed_unlink(ahcd, urb_priv->ed);
+ }
+ } else {
+ /*
+ * with HC dead, we won't respect hc queue pointers
+ * any more ... just clean up every urb's memory.
+ */
+ if (urb->hcpriv)
+ finish_urb(ahcd, urb, status);
+ }
+ spin_unlock_irqrestore(&ahcd->lock, flags);
+
+ return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* frees config/altsetting state for endpoints,
+ * including ED memory, dummy TD, and bulk/intr data toggle
+ */
+
+static void admhc_endpoint_disable(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ unsigned long flags;
+ struct ed *ed = ep->hcpriv;
+ unsigned limit = 1000;
+
+ /* ASSERT: any requests/urbs are being unlinked */
+ /* ASSERT: nobody can be submitting urbs for this any more */
+
+ if (!ed)
+ return;
+
+#ifdef ADMHC_VERBOSE_DEBUG
+ spin_lock_irqsave(&ahcd->lock, flags);
+ admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
+ spin_unlock_irqrestore(&ahcd->lock, flags);
+#endif
+
+rescan:
+ spin_lock_irqsave(&ahcd->lock, flags);
+
+ if (!HC_IS_RUNNING(hcd->state)) {
+sanitize:
+ ed->state = ED_IDLE;
+ finish_unlinks(ahcd, 0);
+ }
+
+ switch (ed->state) {
+ case ED_UNLINK: /* wait for hw to finish? */
+ /* major IRQ delivery trouble loses INTR_SOFI too... */
+ if (limit-- == 0) {
+ admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
+ goto sanitize;
+ }
+ spin_unlock_irqrestore(&ahcd->lock, flags);
+ schedule_timeout_uninterruptible(1);
+ goto rescan;
+ case ED_IDLE: /* fully unlinked */
+ if (list_empty(&ed->td_list)) {
+ td_free(ahcd, ed->dummy);
+ ed_free(ahcd, ed);
+ break;
+ }
+ /* else FALL THROUGH */
+ default:
+ /* caller was supposed to have unlinked any requests;
+ * that's not our job. can't recover; must leak ed.
+ */
+ admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
+ ed, ep->desc.bEndpointAddress, ed->state,
+ list_empty(&ed->td_list) ? "" : " (has tds)");
+ td_free(ahcd, ed->dummy);
+ break;
+ }
+
+ ep->hcpriv = NULL;
+
+ spin_unlock_irqrestore(&ahcd->lock, flags);
+}
+
+static int admhc_get_frame_number(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+ return admhc_frame_no(ahcd);
+}
+
+static void admhc_usb_reset(struct admhcd *ahcd)
+{
+#if 0
+ ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+ ahcd->hc_control &= OHCI_CTRL_RWC;
+ admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
+#else
+ /* FIXME */
+ ahcd->host_control = ADMHC_BUSS_RESET;
+ admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
+#endif
+}
+
+/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
+ * other cases where the next software may expect clean state from the
+ * "firmware". this is bus-neutral, unlike shutdown() methods.
+ */
+static void
+admhc_shutdown(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd;
+
+ ahcd = hcd_to_admhcd(hcd);
+ admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+ admhc_dma_disable(ahcd);
+ admhc_usb_reset(ahcd);
+ /* flush the writes */
+ admhc_writel_flush(ahcd);
+}
+
+/*-------------------------------------------------------------------------*
+ * HC functions
+ *-------------------------------------------------------------------------*/
+
+static void admhc_eds_cleanup(struct admhcd *ahcd)
+{
+ if (ahcd->ed_tails[PIPE_INTERRUPT]) {
+ ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
+ ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
+ }
+
+ if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
+ ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
+ ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
+ }
+
+ if (ahcd->ed_tails[PIPE_CONTROL]) {
+ ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
+ ahcd->ed_tails[PIPE_CONTROL] = NULL;
+ }
+
+ if (ahcd->ed_tails[PIPE_BULK]) {
+ ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
+ ahcd->ed_tails[PIPE_BULK] = NULL;
+ }
+
+ ahcd->ed_head = NULL;
+}
+
+#define ED_DUMMY_INFO (ED_SPEED_FULL | ED_SKIP)
+
+static int admhc_eds_init(struct admhcd *ahcd)
+{
+ struct ed *ed;
+
+ ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
+ if (!ed)
+ goto err;
+
+ ahcd->ed_tails[PIPE_INTERRUPT] = ed;
+
+ ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
+ if (!ed)
+ goto err;
+
+ ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
+ ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
+ ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
+ ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+ ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
+ if (!ed)
+ goto err;
+
+ ahcd->ed_tails[PIPE_CONTROL] = ed;
+ ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
+ ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
+ ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+ ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
+ if (!ed)
+ goto err;
+
+ ahcd->ed_tails[PIPE_BULK] = ed;
+ ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
+ ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
+ ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
+
+ ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
+
+#ifdef ADMHC_VERBOSE_DEBUG
+ admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
+ admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
+ admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
+ admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
+#endif
+
+ return 0;
+
+err:
+ admhc_eds_cleanup(ahcd);
+ return -ENOMEM;
+}
+
+/* init memory, and kick BIOS/SMM off */
+
+static int admhc_init(struct admhcd *ahcd)
+{
+ struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
+ int ret;
+
+ admhc_disable(ahcd);
+ ahcd->regs = hcd->regs;
+
+ /* Disable HC interrupts */
+ admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+
+ /* Read the number of ports unless overridden */
+ if (ahcd->num_ports == 0)
+ ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
+
+ ret = admhc_mem_init(ahcd);
+ if (ret)
+ goto err;
+
+ /* init dummy endpoints */
+ ret = admhc_eds_init(ahcd);
+ if (ret)
+ goto err;
+
+ create_debug_files(ahcd);
+
+ return 0;
+
+err:
+ admhc_stop(hcd);
+ return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Start an OHCI controller, set the BUS operational
+ * resets USB and controller
+ * enable interrupts
+ */
+static int admhc_run(struct admhcd *ahcd)
+{
+ u32 val;
+ int first = ahcd->fminterval == 0;
+ struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
+
+ admhc_disable(ahcd);
+
+ /* boot firmware should have set this up (5.1.1.3.1) */
+ if (first) {
+ val = admhc_readl(ahcd, &ahcd->regs->fminterval);
+ ahcd->fminterval = val & ADMHC_SFI_FI_MASK;
+ if (ahcd->fminterval != FI)
+ admhc_dbg(ahcd, "fminterval delta %d\n",
+ ahcd->fminterval - FI);
+ ahcd->fminterval |=
+ (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
+ /* also: power/overcurrent flags in rhdesc */
+ }
+
+#if 0 /* TODO: not applicable */
+ /* Reset USB nearly "by the book". RemoteWakeupConnected has
+ * to be checked in case boot firmware (BIOS/SMM/...) has set up
+ * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM).
+ * If the bus glue detected wakeup capability then it should
+ * already be enabled; if so we'll just enable it again.
+ */
+ if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0)
+ device_set_wakeup_capable(hcd->self.controller, 1);
+#endif
+
+ switch (ahcd->host_control & ADMHC_HC_BUSS) {
+ case ADMHC_BUSS_OPER:
+ val = 0;
+ break;
+ case ADMHC_BUSS_SUSPEND:
+ /* FALLTHROUGH ? */
+ case ADMHC_BUSS_RESUME:
+ ahcd->host_control = ADMHC_BUSS_RESUME;
+ val = 10 /* msec wait */;
+ break;
+ /* case ADMHC_BUSS_RESET: */
+ default:
+ ahcd->host_control = ADMHC_BUSS_RESET;
+ val = 50 /* msec wait */;
+ break;
+ }
+ admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
+
+ /* flush the writes */
+ admhc_writel_flush(ahcd);
+
+ msleep(val);
+ val = admhc_read_rhdesc(ahcd);
+ if (!(val & ADMHC_RH_NPS)) {
+ /* power down each port */
+ for (val = 0; val < ahcd->num_ports; val++)
+ admhc_write_portstatus(ahcd, val, ADMHC_PS_CPP);
+ }
+ /* flush those writes */
+ admhc_writel_flush(ahcd);
+
+ /* 2msec timelimit here means no irqs/preempt */
+ spin_lock_irq(&ahcd->lock);
+
+ admhc_writel(ahcd, ADMHC_CTRL_SR, &ahcd->regs->gencontrol);
+ val = 30; /* ... allow extra time */
+ while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
+ if (--val == 0) {
+ spin_unlock_irq(&ahcd->lock);
+ admhc_err(ahcd, "USB HC reset timed out!\n");
+ return -1;
+ }
+ udelay(1);
+ }
+
+ /* enable HOST mode, before access any host specific register */
+ admhc_writel(ahcd, ADMHC_CTRL_UHFE, &ahcd->regs->gencontrol);
+
+ /* Tell the controller where the descriptor list is */
+ admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
+
+ periodic_reinit(ahcd);
+
+ /* use rhsc irqs after khubd is fully initialized */
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ hcd->uses_new_polling = 1;
+
+#if 0
+ /* wake on ConnectStatusChange, matching external hubs */
+ admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
+#else
+ /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
+#endif
+
+ /* Choose the interrupts we care about now, others later on demand */
+ admhc_intr_ack(ahcd, ~0);
+ admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
+
+ admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
+
+ /* flush those writes */
+ admhc_writel_flush(ahcd);
+
+ /* start controller operations */
+ ahcd->host_control = ADMHC_BUSS_OPER;
+ admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
+
+ val = 20;
+ while ((admhc_readl(ahcd, &ahcd->regs->host_control)
+ & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
+ if (--val == 0) {
+ spin_unlock_irq(&ahcd->lock);
+ admhc_err(ahcd, "unable to setup operational mode!\n");
+ return -1;
+ }
+ mdelay(1);
+ }
+
+ hcd->state = HC_STATE_RUNNING;
+
+ ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+
+#if 0
+ /* FIXME: enabling DMA is always failed here for an unknown reason */
+ admhc_dma_enable(ahcd);
+
+ val = 200;
+ while ((admhc_readl(ahcd, &ahcd->regs->host_control)
+ & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
+ if (--val == 0) {
+ spin_unlock_irq(&ahcd->lock);
+ admhc_err(ahcd, "unable to enable DMA!\n");
+ admhc_dump(ahcd, 1);
+ return -1;
+ }
+ mdelay(1);
+ }
+
+#endif
+
+ spin_unlock_irq(&ahcd->lock);
+
+ mdelay(ADMHC_POTPGT);
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* an interrupt happens */
+
+static irqreturn_t admhc_irq(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ struct admhcd_regs __iomem *regs = ahcd->regs;
+ u32 ints;
+
+ ints = admhc_readl(ahcd, ®s->int_status);
+ if ((ints & ADMHC_INTR_INTA) == 0) {
+ /* no unmasked interrupt status is set */
+ return IRQ_NONE;
+ }
+
+ ints &= admhc_readl(ahcd, ®s->int_enable);
+
+ if (ints & ADMHC_INTR_FATI) {
+ /* e.g. due to PCI Master/Target Abort */
+ admhc_disable(ahcd);
+ admhc_err(ahcd, "Fatal Error, controller disabled\n");
+ admhc_dump(ahcd, 1);
+ admhc_usb_reset(ahcd);
+ }
+
+ if (ints & ADMHC_INTR_BABI) {
+ admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
+ admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
+ admhc_err(ahcd, "Babble Detected\n");
+ }
+
+ if (ints & ADMHC_INTR_INSM) {
+ admhc_vdbg(ahcd, "Root Hub Status Change\n");
+ ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+ admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
+
+ /* NOTE: Vendors didn't always make the same implementation
+ * choices for RHSC. Many followed the spec; RHSC triggers
+ * on an edge, like setting and maybe clearing a port status
+ * change bit. With others it's level-triggered, active
+ * until khubd clears all the port status change bits. We'll
+ * always disable it here and rely on polling until khubd
+ * re-enables it.
+ */
+ admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
+ usb_hcd_poll_rh_status(hcd);
+ } else if (ints & ADMHC_INTR_RESI) {
+ /* For connect and disconnect events, we expect the controller
+ * to turn on RHSC along with RD. But for remote wakeup events
+ * this might not happen.
+ */
+ admhc_vdbg(ahcd, "Resume Detect\n");
+ admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ if (ahcd->autostop) {
+ spin_lock(&ahcd->lock);
+ admhc_rh_resume(ahcd);
+ spin_unlock(&ahcd->lock);
+ } else
+ usb_hcd_resume_root_hub(hcd);
+ }
+
+ if (ints & ADMHC_INTR_TDC) {
+ admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
+ admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
+ if (HC_IS_RUNNING(hcd->state))
+ admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
+ spin_lock(&ahcd->lock);
+ admhc_td_complete(ahcd);
+ spin_unlock(&ahcd->lock);
+ if (HC_IS_RUNNING(hcd->state))
+ admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
+ }
+
+ if (ints & ADMHC_INTR_SO) {
+ /* could track INTR_SO to reduce available PCI/... bandwidth */
+ admhc_vdbg(ahcd, "Schedule Overrun\n");
+ }
+
+#if 1
+ spin_lock(&ahcd->lock);
+ if (ahcd->ed_rm_list)
+ finish_unlinks(ahcd, admhc_frame_no(ahcd));
+
+ if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
+ && HC_IS_RUNNING(hcd->state))
+ admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
+ spin_unlock(&ahcd->lock);
+#else
+ if (ints & ADMHC_INTR_SOFI) {
+ admhc_vdbg(ahcd, "Start Of Frame\n");
+ spin_lock(&ahcd->lock);
+
+ /* handle any pending ED removes */
+ finish_unlinks(ahcd, admhc_frameno(ahcd));
+
+ /* leaving INTR_SOFI enabled when there's still unlinking
+ * to be done in the (next frame).
+ */
+ if ((ahcd->ed_rm_list == NULL) ||
+ HC_IS_RUNNING(hcd->state) == 0)
+ /*
+ * disable INTR_SOFI if there are no unlinking to be
+ * done (in the next frame)
+ */
+ admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
+
+ spin_unlock(&ahcd->lock);
+ }
+#endif
+
+ if (HC_IS_RUNNING(hcd->state)) {
+ admhc_intr_ack(ahcd, ints);
+ admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
+ admhc_writel_flush(ahcd);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void admhc_stop(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+ admhc_dump(ahcd, 1);
+
+ flush_scheduled_work();
+
+ admhc_usb_reset(ahcd);
+ admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
+
+ free_irq(hcd->irq, hcd);
+ hcd->irq = -1;
+
+ remove_debug_files(ahcd);
+ admhc_eds_cleanup(ahcd);
+ admhc_mem_cleanup(ahcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ADM5120
+#include "adm5120-drv.c"
+#define PLATFORM_DRIVER usb_hcd_adm5120_driver
+#endif
+
+#if !defined(PLATFORM_DRIVER)
+#error "missing bus glue for admhc-hcd"
+#endif
+
+#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
+
+static int __init admhc_hcd_mod_init(void)
+{
+ int ret = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_INFO "\n", hcd_name);
+ pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
+ sizeof(struct ed), sizeof(struct td));
+ set_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+
+#ifdef DEBUG
+ admhc_debug_root = debugfs_create_dir("admhc", usb_debug_root);
+ if (!admhc_debug_root) {
+ ret = -ENOENT;
+ goto error_debug;
+ }
+#endif
+
+#ifdef PLATFORM_DRIVER
+ ret = platform_driver_register(&PLATFORM_DRIVER);
+ if (ret < 0)
+ goto error_platform;
+#endif
+
+ return ret;
+
+#ifdef PLATFORM_DRIVER
+ platform_driver_unregister(&PLATFORM_DRIVER);
+error_platform:
+#endif
+
+#ifdef DEBUG
+ debugfs_remove(admhc_debug_root);
+ admhc_debug_root = NULL;
+error_debug:
+#endif
+ clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+ return ret;
+}
+module_init(admhc_hcd_mod_init);
+
+static void __exit admhc_hcd_mod_exit(void)
+{
+ platform_driver_unregister(&PLATFORM_DRIVER);
+#ifdef DEBUG
+ debugfs_remove(admhc_debug_root);
+#endif
+ clear_bit(USB_OHCI_LOADED, &usb_hcds_loaded);
+}
+module_exit(admhc_hcd_mod_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_INFO);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
projects / openwrt / svn-archive / archive.git / blobdiff