strip the kernel version suffix from target directories, except for brcm-2.4 (the...
[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files / arch / mips / adm5120 / boards / cellvision.c
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c
new file mode 100644 (file)
index 0000000..f7d44e2
--- /dev/null
@@ -0,0 +1,192 @@
+/*
+ *  $Id$
+ *
+ *  Cellvision/SparkLAN boards
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gpio.h>
+
+#include <asm/mach-adm5120/adm5120_board.h>
+#include <asm/mach-adm5120/adm5120_platform.h>
+
+static void switch_bank_gpio5(unsigned bank)
+{
+       switch (bank) {
+       case 0:
+               gpio_set_value(ADM5120_GPIO_PIN5, 0);
+               break;
+       case 1:
+               gpio_set_value(ADM5120_GPIO_PIN5, 1);
+               break;
+       }
+}
+
+static struct mtd_partition cas6xx_partitions[] = {
+       {
+               .name   = "admboot",
+               .offset = 0,
+               .size   = 32*1024,
+               .mask_flags = MTD_WRITEABLE,
+       } , {
+               .name   = "config",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 32*1024,
+       } , {
+               .name   = "nvfs1",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 64*1024,
+       } , {
+               .name   = "nvfs2",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 64*1024,
+       } , {
+               .name   = "firmware",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = MTDPART_SIZ_FULL,
+       }
+};
+
+static struct mtd_partition cas7xx_partitions[] = {
+       {
+               .name   = "admboot",
+               .offset = 0,
+               .size   = 32*1024,
+               .mask_flags = MTD_WRITEABLE,
+       } , {
+               .name   = "config",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 32*1024,
+       } , {
+               .name   = "nvfs",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = 128*1024,
+       } , {
+               .name   = "firmware",
+               .offset = MTDPART_OFS_APPEND,
+               .size   = MTDPART_SIZ_FULL,
+       }
+};
+
+static struct platform_device *cas6xx_devices[] __initdata = {
+       &adm5120_flash0_device,
+};
+
+static struct platform_device *cas7xx_devices[] __initdata = {
+       &adm5120_flash0_device,
+};
+
+static void __init cas6xx_setup(void)
+{
+       gpio_request(ADM5120_GPIO_PIN5, NULL);  /* for flash A20 line */
+       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+       /* setup data for flash0 device */
+       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
+       adm5120_flash0_data.parts = cas6xx_partitions;
+
+       /* TODO: setup mac address */
+}
+
+static void __init cas7xx_setup(void)
+{
+       gpio_request(ADM5120_GPIO_PIN5, NULL);  /* for flash A20 line */
+       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
+
+       /* setup data for flash0 device */
+       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
+       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
+       adm5120_flash0_data.parts = cas7xx_partitions;
+
+       /* TODO: setup mac address */
+}
+
+static struct adm5120_board cas630_board __initdata = {
+       .mach_type      = MACH_ADM5120_CAS630,
+       .name           = "Cellvision CAS-630/630W",
+       .board_setup    = cas6xx_setup,
+       .eth_num_ports  = 1,
+       .num_devices    = ARRAY_SIZE(cas6xx_devices),
+       .devices        = cas6xx_devices,
+};
+
+static struct adm5120_board cas670_board __initdata = {
+       .mach_type      = MACH_ADM5120_CAS670,
+       .name           = "Cellvision CAS-670/670W",
+       .board_setup    = cas6xx_setup,
+       .eth_num_ports  = 1,
+       .num_devices    = ARRAY_SIZE(cas6xx_devices),
+       .devices        = cas6xx_devices,
+};
+
+static struct adm5120_board cas700_board __initdata = {
+       .mach_type      = MACH_ADM5120_CAS700,
+       .name           = "Cellvision CAS-700/700W",
+       .board_setup    = cas7xx_setup,
+       .eth_num_ports  = 1,
+       .num_devices    = ARRAY_SIZE(cas7xx_devices),
+       .devices        = cas7xx_devices,
+};
+
+static struct adm5120_board cas771_board __initdata = {
+       .mach_type      = MACH_ADM5120_CAS771,
+       .name           = "Cellvision CAS-771/771W",
+       .board_setup    = cas7xx_setup,
+       .eth_num_ports  = 1,
+       .num_devices    = ARRAY_SIZE(cas7xx_devices),
+       .devices        = cas7xx_devices,
+};
+
+static struct adm5120_board cas790_board __initdata = {
+       .mach_type      = MACH_ADM5120_CAS790,
+       .name           = "Cellvision CAS-790",
+       .board_setup    = cas7xx_setup,
+       .eth_num_ports  = 1,
+       .num_devices    = ARRAY_SIZE(cas7xx_devices),
+       .devices        = cas7xx_devices,
+};
+
+static struct adm5120_board cas861_board __initdata = {
+       .mach_type      = MACH_ADM5120_CAS861,
+       .name           = "Cellvision CAS-861/861W",
+       .board_setup    = cas7xx_setup,
+       .eth_num_ports  = 1,
+       .num_devices    = ARRAY_SIZE(cas7xx_devices),
+       .devices        = cas7xx_devices,
+};
+
+static int __init register_boards(void)
+{
+       adm5120_board_register(&cas630_board);
+       adm5120_board_register(&cas670_board);
+       adm5120_board_register(&cas700_board);
+       adm5120_board_register(&cas771_board);
+       adm5120_board_register(&cas790_board);
+       adm5120_board_register(&cas861_board);
+       return 0;
+}
+
+pure_initcall(register_boards);