adm5120: move files to files-3.8

[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files / arch / mips / adm5120 / infineon / infineon.c

diff --git a/target/linux/adm5120/files/arch/mips/adm5120/infineon/infineon.c b/target/linux/adm5120/files/arch/mips/adm5120/infineon/infineon.c
deleted file mode 100644 (file)
index 5c441da..0000000
--- a/target/linux/adm5120/files/arch/mips/adm5120/infineon/infineon.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  Infineon Reference Boards
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include "infineon.h"
-
-#include <prom/admboot.h>
-
-#define EASY_CONFIG_OFFSET     0x10000
-#define EASY_CONFIG_SIZE       0x1000
-
-static struct mtd_partition easy_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static __init void easy_setup_mac(void)
-{
-       u8 mac_base[6];
-       int err;
-
-       err = admboot_get_mac_base(EASY_CONFIG_OFFSET,
-                                  EASY_CONFIG_SIZE, mac_base);
-
-       if ((err) || !is_valid_ether_addr(mac_base))
-               random_ether_addr(mac_base);
-
-       adm5120_setup_eth_macs(mac_base);
-}
-
-static void switch_bank_gpio3(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN3, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN3, 1);
-               break;
-       }
-}
-
-void __init easy_setup_pqfp(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN3, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN3, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       easy_setup_mac();
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-void __init easy_setup_bga(void)
-{
-       /* setup flash A20 line */
-       gpio_request(ADM5120_GPIO_PIN5, NULL);
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_add_device_uart(0);
-       adm5120_add_device_uart(1);
-
-       adm5120_add_device_flash(0);
-
-       easy_setup_mac();
-}