adm5120: move files to files-3.8
[openwrt/svn-archive/archive.git] / target / linux / adm5120 / files / drivers / ata / pata_rb153_cf.c
diff --git a/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c
deleted file mode 100644 (file)
index 92a4d13..0000000
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- *  A low-level PATA driver to handle a Compact Flash connected on the
- *  Mikrotik's RouterBoard 153 board.
- *
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This file was based on: drivers/ata/pata_ixp4xx_cf.c
- *     Copyright (C) 2006-07 Tower Technologies
- *     Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- *  Also was based on the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
- *  seems not to have a license.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/libata.h>
-#include <scsi/scsi_host.h>
-
-#define DRV_NAME       "pata-rb153-cf"
-#define DRV_VERSION    "0.5.0"
-#define DRV_DESC       "PATA driver for RouterBOARD 153 Compact Flash"
-
-#define RB153_CF_MAXPORTS      1
-#define RB153_CF_IO_DELAY      100
-
-#define RB153_CF_REG_CMD       0x0800
-#define RB153_CF_REG_CTRL      0x080E
-#define RB153_CF_REG_DATA      0x0C00
-
-struct rb153_cf_info {
-       void __iomem    *iobase;
-       unsigned int    gpio_line;
-       int             frozen;
-       unsigned int    irq;
-};
-
-static inline void rb153_pata_finish_io(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       /* FIXME: Keep previous delay. If this is merely a fence then
-        * ata_sff_sync might be sufficient. */
-       ata_sff_dma_pause(ap);
-       ndelay(RB153_CF_IO_DELAY);
-
-       irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-}
-
-static void rb153_pata_exec_command(struct ata_port *ap,
-                                       const struct ata_taskfile *tf)
-{
-       writeb(tf->command, ap->ioaddr.command_addr);
-       rb153_pata_finish_io(ap);
-}
-
-static unsigned int rb153_pata_data_xfer(struct ata_device *adev,
-                                       unsigned char *buf,
-                                       unsigned int buflen,
-                                       int write_data)
-{
-       void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr;
-       unsigned int t;
-
-       t = buflen;
-       if (write_data) {
-               for (; t > 0; t--, buf++)
-                       writeb(*buf, ioaddr);
-       } else {
-               for (; t > 0; t--, buf++)
-                       *buf = readb(ioaddr);
-       }
-
-       rb153_pata_finish_io(adev->link->ap);
-       return buflen;
-}
-
-static void rb153_pata_freeze(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 1;
-}
-
-static void rb153_pata_thaw(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 0;
-}
-
-static irqreturn_t rb153_pata_irq_handler(int irq, void *dev_instance)
-{
-       struct ata_host *ah = dev_instance;
-       struct rb153_cf_info *info = ah->private_data;
-
-       if (gpio_get_value(info->gpio_line)) {
-               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
-               if (!info->frozen)
-                       ata_sff_interrupt(irq, dev_instance);
-       } else {
-               irq_set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-       }
-
-       return IRQ_HANDLED;
-}
-
-static struct ata_port_operations rb153_pata_port_ops = {
-       .inherits               = &ata_sff_port_ops,
-       .sff_exec_command       = rb153_pata_exec_command,
-       .sff_data_xfer          = rb153_pata_data_xfer,
-       .freeze                 = rb153_pata_freeze,
-       .thaw                   = rb153_pata_thaw,
-};
-
-static struct scsi_host_template rb153_pata_sht = {
-       ATA_PIO_SHT(DRV_NAME),
-};
-
-static void rb153_pata_setup_port(struct ata_host *ah)
-{
-       struct rb153_cf_info *info = ah->private_data;
-       struct ata_port *ap;
-
-       ap = ah->ports[0];
-
-       ap->ops         = &rb153_pata_port_ops;
-       ap->pio_mask    = 0x1f; /* PIO4 */
-
-       ap->ioaddr.cmd_addr     = info->iobase + RB153_CF_REG_CMD;
-       ap->ioaddr.ctl_addr     = info->iobase + RB153_CF_REG_CTRL;
-       ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL;
-
-       ata_sff_std_ports(&ap->ioaddr);
-
-       ap->ioaddr.data_addr = info->iobase + RB153_CF_REG_DATA;
-}
-
-static int rb153_pata_driver_probe(struct platform_device *pdev)
-{
-       unsigned int irq;
-       int gpio;
-       struct resource *res;
-       struct ata_host *ah;
-       struct rb153_cf_info *info;
-       int ret;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&pdev->dev, "no IOMEM resource found\n");
-               return -EINVAL;
-       }
-
-       irq = platform_get_irq(pdev, 0);
-       if (irq <= 0) {
-               dev_err(&pdev->dev, "no IRQ resource found\n");
-               return -ENOENT;
-       }
-
-       gpio = irq_to_gpio(irq);
-       if (gpio < 0) {
-               dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
-               return -ENOENT;
-       }
-
-       ret = gpio_request(gpio, DRV_NAME);
-       if (ret) {
-               dev_err(&pdev->dev, "GPIO request failed\n");
-               return ret;
-       }
-
-       ah = ata_host_alloc(&pdev->dev, RB153_CF_MAXPORTS);
-       if (!ah)
-               return -ENOMEM;
-
-       platform_set_drvdata(pdev, ah);
-
-       info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-       if (!info)
-               return -ENOMEM;
-
-       ah->private_data = info;
-       info->gpio_line = gpio;
-       info->irq = irq;
-
-       info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
-                               res->end - res->start + 1);
-       if (!info->iobase)
-               return -ENOMEM;
-
-       ret = gpio_direction_input(gpio);
-       if (ret) {
-               dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
-                               ret);
-               goto err_free_gpio;
-       }
-
-       rb153_pata_setup_port(ah);
-
-       ret = ata_host_activate(ah, irq, rb153_pata_irq_handler,
-                               IRQF_TRIGGER_LOW, &rb153_pata_sht);
-       if (ret)
-               goto err_free_gpio;
-
-       return 0;
-
-err_free_gpio:
-       gpio_free(gpio);
-
-       return ret;
-}
-
-static int rb153_pata_driver_remove(struct platform_device *pdev)
-{
-       struct ata_host *ah = platform_get_drvdata(pdev);
-       struct rb153_cf_info *info = ah->private_data;
-
-       ata_host_detach(ah);
-       gpio_free(info->gpio_line);
-
-       return 0;
-}
-
-static struct platform_driver rb153_pata_platform_driver = {
-       .probe          = rb153_pata_driver_probe,
-       .remove         = rb153_pata_driver_remove,
-       .driver  = {
-               .name   = DRV_NAME,
-               .owner  = THIS_MODULE,
-       },
-};
-
-/* ------------------------------------------------------------------------ */
-
-#define DRV_INFO DRV_DESC " version " DRV_VERSION
-
-static int __init rb153_pata_module_init(void)
-{
-       printk(KERN_INFO DRV_INFO "\n");
-
-       return platform_driver_register(&rb153_pata_platform_driver);
-}
-
-static void __exit rb153_pata_module_exit(void)
-{
-       platform_driver_unregister(&rb153_pata_platform_driver);
-}
-
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL v2");
-
-module_init(rb153_pata_module_init);
-module_exit(rb153_pata_module_exit);