--- /dev/null
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under GPL
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OHCI Root Hub ... the nonsharable stuff
+ */
+
+#define dbg_port(hc,label,num,value) \
+ admhc_dbg(hc, \
+ "%s port%d " \
+ "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+ label, num, temp, \
+ (temp & ADMHC_PS_PRSC) ? " PRSC" : "", \
+ (temp & ADMHC_PS_OCIC) ? " OCIC" : "", \
+ (temp & ADMHC_PS_PSSC) ? " PSSC" : "", \
+ (temp & ADMHC_PS_PESC) ? " PESC" : "", \
+ (temp & ADMHC_PS_CSC) ? " CSC" : "", \
+ \
+ (temp & ADMHC_PS_LSDA) ? " LSDA" : "", \
+ (temp & ADMHC_PS_PPS) ? " PPS" : "", \
+ (temp & ADMHC_PS_PRS) ? " PRS" : "", \
+ (temp & ADMHC_PS_POCI) ? " POCI" : "", \
+ (temp & ADMHC_PS_PSS) ? " PSS" : "", \
+ \
+ (temp & ADMHC_PS_PES) ? " PES" : "", \
+ (temp & ADMHC_PS_CCS) ? " CCS" : "" \
+ );
+
+#define dbg_port_write(hc,label,num,value) \
+ admhc_dbg(hc, \
+ "%s port%d " \
+ "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
+ label, num, temp, \
+ (temp & ADMHC_PS_PRSC) ? " PRSC" : "", \
+ (temp & ADMHC_PS_OCIC) ? " OCIC" : "", \
+ (temp & ADMHC_PS_PSSC) ? " PSSC" : "", \
+ (temp & ADMHC_PS_PESC) ? " PESC" : "", \
+ (temp & ADMHC_PS_CSC) ? " CSC" : "", \
+ \
+ (temp & ADMHC_PS_CPP) ? " CPP" : "", \
+ (temp & ADMHC_PS_SPP) ? " SPP" : "", \
+ (temp & ADMHC_PS_SPR) ? " SPR" : "", \
+ (temp & ADMHC_PS_CPS) ? " CPS" : "", \
+ (temp & ADMHC_PS_SPS) ? " SPS" : "", \
+ \
+ (temp & ADMHC_PS_SPE) ? " SPE" : "", \
+ (temp & ADMHC_PS_CPE) ? " CPE" : "" \
+ );
+
+/*-------------------------------------------------------------------------*/
+
+/* hcd->hub_irq_enable() */
+static void admhc_rhsc_enable(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+
+ spin_lock_irq(&ahcd->lock);
+ if (!ahcd->autostop)
+ del_timer(&hcd->rh_timer); /* Prevent next poll */
+ admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
+ spin_unlock_irq(&ahcd->lock);
+}
+
+#define OHCI_SCHED_ENABLES \
+ (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
+
+#ifdef CONFIG_PM
+static int admhc_restart(struct admhcd *ahcd);
+
+static int admhc_rh_suspend(struct admhcd *ahcd, int autostop)
+__releases(ahcd->lock)
+__acquires(ahcd->lock)
+{
+ int status = 0;
+
+ ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+ switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_RESUME:
+ admhc_dbg(ahcd, "resume/suspend?\n");
+ ahcd->hc_control &= ~OHCI_CTRL_HCFS;
+ ahcd->hc_control |= OHCI_USB_RESET;
+ admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+ (void) admhc_readl(ahcd, &ahcd->regs->control);
+ /* FALL THROUGH */
+ case OHCI_USB_RESET:
+ status = -EBUSY;
+ admhc_dbg(ahcd, "needs reinit!\n");
+ goto done;
+ case OHCI_USB_SUSPEND:
+ if (!ahcd->autostop) {
+ admhc_dbg(ahcd, "already suspended\n");
+ goto done;
+ }
+ }
+ admhc_dbg(ahcd, "%s root hub\n",
+ autostop ? "auto-stop" : "suspend");
+
+ /* First stop any processing */
+ if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) {
+ ahcd->hc_control &= ~OHCI_SCHED_ENABLES;
+ admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+ ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+ admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus);
+
+ /* sched disables take effect on the next frame,
+ * then the last WDH could take 6+ msec
+ */
+ admhc_dbg(ahcd, "stopping schedules ...\n");
+ ahcd->autostop = 0;
+ spin_unlock_irq (&ahcd->lock);
+ msleep (8);
+ spin_lock_irq (&ahcd->lock);
+ }
+ dl_done_list (ahcd);
+ finish_unlinks (ahcd, admhc_frame_no(ahcd));
+
+ /* maybe resume can wake root hub */
+ if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) ||
+ autostop)
+ ahcd->hc_control |= OHCI_CTRL_RWE;
+ else {
+ admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable);
+ ahcd->hc_control &= ~OHCI_CTRL_RWE;
+ }
+
+ /* Suspend hub ... this is the "global (to this bus) suspend" mode,
+ * which doesn't imply ports will first be individually suspended.
+ */
+ ahcd->hc_control &= ~OHCI_CTRL_HCFS;
+ ahcd->hc_control |= OHCI_USB_SUSPEND;
+ admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+ (void) admhc_readl(ahcd, &ahcd->regs->control);
+
+ /* no resumes until devices finish suspending */
+ if (!autostop) {
+ ahcd->next_statechange = jiffies + msecs_to_jiffies (5);
+ ahcd->autostop = 0;
+ }
+
+done:
+ return status;
+}
+
+static inline struct ed *find_head(struct ed *ed)
+{
+ /* for bulk and control lists */
+ while (ed->ed_prev)
+ ed = ed->ed_prev;
+ return ed;
+}
+
+/* caller has locked the root hub */
+static int admhc_rh_resume(struct admhcd *ahcd)
+__releases(ahcd->lock)
+__acquires(ahcd->lock)
+{
+ struct usb_hcd *hcd = admhcd_to_hcd (ahcd);
+ u32 temp, enables;
+ int status = -EINPROGRESS;
+ int autostopped = ahcd->autostop;
+
+ ahcd->autostop = 0;
+ ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
+
+ if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+ /* this can happen after resuming a swsusp snapshot */
+ if (hcd->state == HC_STATE_RESUMING) {
+ admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n",
+ ahcd->hc_control);
+ status = -EBUSY;
+ /* this happens when pmcore resumes HC then root */
+ } else {
+ admhc_dbg(ahcd, "duplicate resume\n");
+ status = 0;
+ }
+ } else switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_SUSPEND:
+ ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
+ ahcd->hc_control |= OHCI_USB_RESUME;
+ admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+ (void) admhc_readl(ahcd, &ahcd->regs->control);
+ admhc_dbg(ahcd, "%s root hub\n",
+ autostopped ? "auto-start" : "resume");
+ break;
+ case OHCI_USB_RESUME:
+ /* HCFS changes sometime after INTR_RD */
+ admhc_dbg(ahcd, "%swakeup root hub\n",
+ autostopped ? "auto-" : "");
+ break;
+ case OHCI_USB_OPER:
+ /* this can happen after resuming a swsusp snapshot */
+ admhc_dbg(ahcd, "snapshot resume? reinit\n");
+ status = -EBUSY;
+ break;
+ default: /* RESET, we lost power */
+ admhc_dbg(ahcd, "lost power\n");
+ status = -EBUSY;
+ }
+ if (status == -EBUSY) {
+ if (!autostopped) {
+ spin_unlock_irq (&ahcd->lock);
+ (void) ahcd_init (ahcd);
+ status = admhc_restart (ahcd);
+ spin_lock_irq (&ahcd->lock);
+ }
+ return status;
+ }
+ if (status != -EINPROGRESS)
+ return status;
+ if (autostopped)
+ goto skip_resume;
+ spin_unlock_irq (&ahcd->lock);
+
+ /* Some controllers (lucent erratum) need extra-long delays */
+ msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
+
+ temp = admhc_readl(ahcd, &ahcd->regs->control);
+ temp &= OHCI_CTRL_HCFS;
+ if (temp != OHCI_USB_RESUME) {
+ admhc_err (ahcd, "controller won't resume\n");
+ spin_lock_irq(&ahcd->lock);
+ return -EBUSY;
+ }
+
+ /* disable old schedule state, reinit from scratch */
+ admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead);
+ admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent);
+ admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead);
+ admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent);
+ admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent);
+ admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca);
+
+ /* Sometimes PCI D3 suspend trashes frame timings ... */
+ periodic_reinit(ahcd);
+
+ /* the following code is executed with ahcd->lock held and
+ * irqs disabled if and only if autostopped is true
+ */
+
+skip_resume:
+ /* interrupts might have been disabled */
+ admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable);
+ if (ahcd->ed_rm_list)
+ admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable);
+
+ /* Then re-enable operations */
+ admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control);
+ (void) admhc_readl(ahcd, &ahcd->regs->control);
+ if (!autostopped)
+ msleep (3);
+
+ temp = ahcd->hc_control;
+ temp &= OHCI_CTRL_RWC;
+ temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
+ ahcd->hc_control = temp;
+ admhc_writel(ahcd, temp, &ahcd->regs->control);
+ (void) admhc_readl(ahcd, &ahcd->regs->control);
+
+ /* TRSMRCY */
+ if (!autostopped) {
+ msleep (10);
+ spin_lock_irq (&ahcd->lock);
+ }
+ /* now ahcd->lock is always held and irqs are always disabled */
+
+ /* keep it alive for more than ~5x suspend + resume costs */
+ ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
+
+ /* maybe turn schedules back on */
+ enables = 0;
+ temp = 0;
+ if (!ahcd->ed_rm_list) {
+ if (ahcd->ed_controltail) {
+ admhc_writel(ahcd,
+ find_head (ahcd->ed_controltail)->dma,
+ &ahcd->regs->ed_controlhead);
+ enables |= OHCI_CTRL_CLE;
+ temp |= OHCI_CLF;
+ }
+ if (ahcd->ed_bulktail) {
+ admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma,
+ &ahcd->regs->ed_bulkhead);
+ enables |= OHCI_CTRL_BLE;
+ temp |= OHCI_BLF;
+ }
+ }
+ if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
+ enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
+ if (enables) {
+ admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables);
+ ahcd->hc_control |= enables;
+ admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
+ if (temp)
+ admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus);
+ (void) admhc_readl(ahcd, &ahcd->regs->control);
+ }
+
+ return 0;
+}
+
+static int admhc_bus_suspend(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int rc;
+
+ spin_lock_irq(&ahcd->lock);
+
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ rc = -ESHUTDOWN;
+ else
+ rc = admhc_rh_suspend (ahcd, 0);
+ spin_unlock_irq(&ahcd->lock);
+ return rc;
+}
+
+static int admhc_bus_resume(struct usb_hcd *hcd)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int rc;
+
+ if (time_before(jiffies, ahcd->next_statechange))
+ msleep(5);
+
+ spin_lock_irq (&ahcd->lock);
+
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ rc = -ESHUTDOWN;
+ else
+ rc = admhc_rh_resume (ahcd);
+ spin_unlock_irq(&ahcd->lock);
+
+ /* poll until we know a device is connected or we autostop */
+ if (rc == 0)
+ usb_hcd_poll_rh_status(hcd);
+ return rc;
+}
+
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
+ int any_connected)
+{
+ int poll_rh = 1;
+
+ switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
+
+ case OHCI_USB_OPER:
+ /* keep on polling until we know a device is connected
+ * and RHSC is enabled */
+ if (!ahcd->autostop) {
+ if (any_connected ||
+ !device_may_wakeup(&admhcd_to_hcd(ahcd)
+ ->self.root_hub->dev)) {
+ if (admhc_readl(ahcd, &ahcd->regs->int_enable) &
+ OHCI_INTR_RHSC)
+ poll_rh = 0;
+ } else {
+ ahcd->autostop = 1;
+ ahcd->next_statechange = jiffies + HZ;
+ }
+
+ /* if no devices have been attached for one second, autostop */
+ } else {
+ if (changed || any_connected) {
+ ahcd->autostop = 0;
+ ahcd->next_statechange = jiffies +
+ STATECHANGE_DELAY;
+ } else if (time_after_eq(jiffies,
+ ahcd->next_statechange)
+ && !ahcd->ed_rm_list
+ && !(ahcd->hc_control &
+ OHCI_SCHED_ENABLES)) {
+ ahcd_rh_suspend(ahcd, 1);
+ }
+ }
+ break;
+
+ /* if there is a port change, autostart or ask to be resumed */
+ case OHCI_USB_SUSPEND:
+ case OHCI_USB_RESUME:
+ if (changed) {
+ if (ahcd->autostop)
+ admhc_rh_resume(ahcd);
+ else
+ usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd));
+ } else {
+ /* everything is idle, no need for polling */
+ poll_rh = 0;
+ }
+ break;
+ }
+ return poll_rh;
+}
+
+#else /* CONFIG_PM */
+
+static inline int admhc_rh_resume(struct admhcd *ahcd)
+{
+ return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
+ int any_connected)
+{
+ int poll_rh = 1;
+
+ /* keep on polling until RHSC is enabled */
+ if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
+ poll_rh = 0;
+
+ return poll_rh;
+}
+
+#endif /* CONFIG_PM */
+
+/*-------------------------------------------------------------------------*/
+
+/* build "status change" packet (one or two bytes) from HC registers */
+
+static int
+admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int i, changed = 0, length = 1;
+ int any_connected = 0;
+ unsigned long flags;
+ u32 status;
+
+ spin_lock_irqsave(&ahcd->lock, flags);
+ if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
+ goto done;
+
+ /* init status */
+ status = admhc_get_rhdesc(ahcd);
+ if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
+ buf [0] = changed = 1;
+ else
+ buf [0] = 0;
+ if (ahcd->num_ports > 7) {
+ buf [1] = 0;
+ length++;
+ }
+
+ /* look at each port */
+ for (i = 0; i < ahcd->num_ports; i++) {
+ status = admhc_get_portstatus(ahcd, i);
+
+ /* can't autostop if ports are connected */
+ any_connected |= (status & ADMHC_PS_CCS);
+
+ if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
+ | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
+ changed = 1;
+ if (i < 7)
+ buf [0] |= 1 << (i + 1);
+ else
+ buf [1] |= 1 << (i - 7);
+ }
+ }
+
+ hcd->poll_rh = admhc_root_hub_state_changes(ahcd, changed,
+ any_connected);
+
+done:
+ spin_unlock_irqrestore(&ahcd->lock, flags);
+
+ return changed ? length : 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void admhc_hub_descriptor(struct admhcd *ahcd,
+ struct usb_hub_descriptor *desc)
+{
+ u32 rh = admhc_get_rhdesc(ahcd);
+ u16 temp;
+
+ desc->bDescriptorType = USB_DT_HUB; /* Hub-descriptor */
+ desc->bPwrOn2PwrGood = ADMHC_POTPGT/2; /* use default value */
+ desc->bHubContrCurrent = 0x00; /* 0mA */
+
+ desc->bNbrPorts = ahcd->num_ports;
+ temp = 1 + (ahcd->num_ports / 8);
+ desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
+
+ /* FIXME */
+ temp = 0;
+ if (rh & ADMHC_RH_NPS) /* no power switching? */
+ temp |= 0x0002;
+ if (rh & ADMHC_RH_PSM) /* per-port power switching? */
+ temp |= 0x0001;
+ if (rh & ADMHC_RH_NOCP) /* no overcurrent reporting? */
+ temp |= 0x0010;
+ else if (rh & ADMHC_RH_OCPM) /* per-port overcurrent reporting? */
+ temp |= 0x0008;
+ desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
+
+ /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
+ desc->bitmap [0] = 0;
+ desc->bitmap [0] = ~0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_USB_OTG
+
+static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
+{
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ u32 status;
+
+ if (!port)
+ return -EINVAL;
+ port--;
+
+ /* start port reset before HNP protocol times out */
+ status = admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
+ if (!(status & ADMHC_PS_CCS))
+ return -ENODEV;
+
+ /* khubd will finish the reset later */
+ admhc_writel(ahcd, ADMHC_PS_PRS, &ahcd->regs->portstatus[port]);
+ return 0;
+}
+
+static void start_hnp(struct admhcd *ahcd);
+
+#else
+
+#define admhc_start_port_reset NULL
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+
+/* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling,
+ * not necessarily continuous ... to guard against resume signaling.
+ * The short timeout is safe for non-root hubs, and is backward-compatible
+ * with earlier Linux hosts.
+ */
+#ifdef CONFIG_USB_SUSPEND
+#define PORT_RESET_MSEC 50
+#else
+#define PORT_RESET_MSEC 10
+#endif
+
+/* this timer value might be vendor-specific ... */
+#define PORT_RESET_HW_MSEC 10
+
+/* wrap-aware logic morphed from <linux/jiffies.h> */
+#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
+
+/* called from some task, normally khubd */
+static inline int root_port_reset(struct admhcd *ahcd, unsigned port)
+{
+#if 0
+ /* FIXME: revert to this when frame numbers are updated */
+ __hc32 __iomem *portstat = &ahcd->regs->portstatus[port];
+ u32 temp;
+ u16 now = admhc_readl(ahcd, &ahcd->regs->fmnumber);
+ u16 reset_done = now + PORT_RESET_MSEC;
+
+ /* build a "continuous enough" reset signal, with up to
+ * 3msec gap between pulses. scheduler HZ==100 must work;
+ * this might need to be deadline-scheduled.
+ */
+ do {
+ /* spin until any current reset finishes */
+ for (;;) {
+ temp = admhc_readl(ahcd, portstat);
+ /* handle e.g. CardBus eject */
+ if (temp == ~(u32)0)
+ return -ESHUTDOWN;
+ if (!(temp & ADMHC_PS_PRS))
+ break;
+ udelay (500);
+ }
+
+ if (!(temp & ADMHC_PS_CCS))
+ break;
+ if (temp & ADMHC_PS_PRSC)
+ admhc_writel(ahcd, ADMHC_PS_PRSC, portstat);
+
+ /* start the next reset, sleep till it's probably done */
+ admhc_writel(ahcd, ADMHC_PS_PRS, portstat);
+ msleep(PORT_RESET_HW_MSEC);
+ now = admhc_readl(ahcd, &ahcd->regs->fmnumber);
+ } while (tick_before(now, reset_done));
+ /* caller synchronizes using PRSC */
+#else
+ __hc32 __iomem *portstat = &ahcd->regs->portstatus[port];
+ u32 temp;
+ unsigned long reset_done = jiffies + msecs_to_jiffies(PORT_RESET_MSEC);
+
+ /* build a "continuous enough" reset signal, with up to
+ * 3msec gap between pulses. scheduler HZ==100 must work;
+ * this might need to be deadline-scheduled.
+ */
+ do {
+ /* spin until any current reset finishes */
+ for (;;) {
+ temp = admhc_readl(ahcd, portstat);
+ /* handle e.g. CardBus eject */
+ if (temp == ~(u32)0)
+ return -ESHUTDOWN;
+ if (!(temp & ADMHC_PS_PRS))
+ break;
+ udelay (500);
+ }
+
+ if (!(temp & ADMHC_PS_CCS))
+ break;
+
+ if (temp & ADMHC_PS_PRSC)
+ admhc_writel(ahcd, ADMHC_PS_PRSC, portstat);
+
+ /* start the next reset, sleep till it's probably done */
+ admhc_writel(ahcd, ADMHC_PS_PRS, portstat);
+ msleep(PORT_RESET_HW_MSEC);
+ } while (time_before(jiffies, reset_done));
+
+ admhc_writel(ahcd, ADMHC_PS_SPE | ADMHC_PS_CSC, portstat);
+ msleep(100);
+#endif
+ return 0;
+}
+
+static int admhc_hub_control (
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+) {
+ struct admhcd *ahcd = hcd_to_admhcd(hcd);
+ int ports = hcd_to_bus (hcd)->root_hub->maxchild;
+ u32 temp;
+ int retval = 0;
+
+ if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
+ return -ESHUTDOWN;
+
+ switch (typeReq) {
+ case ClearHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+#if 0 /* FIXME */
+ admhc_writel(ahcd, ADMHC_RH_OCIC,
+ &ahcd->regs->roothub.status);
+#endif
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case ClearPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ temp = ADMHC_PS_CPE;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ temp = ADMHC_PS_CPS;
+ break;
+ case USB_PORT_FEAT_POWER:
+ temp = ADMHC_PS_CPP;
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ temp = ADMHC_PS_CSC;
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ temp = ADMHC_PS_PESC;
+ break;
+ case USB_PORT_FEAT_C_SUSPEND:
+ temp = ADMHC_PS_PSSC;
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ temp = ADMHC_PS_OCIC;
+ break;
+ case USB_PORT_FEAT_C_RESET:
+ temp = ADMHC_PS_PRSC;
+ break;
+ default:
+ goto error;
+ }
+ admhc_writel(ahcd, temp, &ahcd->regs->portstatus[wIndex]);
+ break;
+ case GetHubDescriptor:
+ admhc_hub_descriptor(ahcd, (struct usb_hub_descriptor *) buf);
+ break;
+ case GetHubStatus:
+ temp = admhc_get_rhdesc(ahcd);
+ temp &= ~(ADMHC_RH_CRWE | ADMHC_RH_DRWE);
+ put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
+ break;
+ case GetPortStatus:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+ temp = admhc_get_portstatus(ahcd, wIndex);
+ put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
+
+ dbg_port(ahcd, "GetPortStatus", wIndex, temp);
+ break;
+ case SetHubFeature:
+ switch (wValue) {
+ case C_HUB_OVER_CURRENT:
+ // FIXME: this can be cleared, yes?
+ case C_HUB_LOCAL_POWER:
+ break;
+ default:
+ goto error;
+ }
+ break;
+ case SetPortFeature:
+ if (!wIndex || wIndex > ports)
+ goto error;
+ wIndex--;
+
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ admhc_writel(ahcd, ADMHC_PS_SPE,
+ &ahcd->regs->portstatus[wIndex]);
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+#ifdef CONFIG_USB_OTG
+ if (hcd->self.otg_port == (wIndex + 1)
+ && hcd->self.b_hnp_enable)
+ start_hnp(ahcd);
+ else
+#endif
+ admhc_writel(ahcd, ADMHC_PS_SPS,
+ &ahcd->regs->portstatus[wIndex]);
+ break;
+ case USB_PORT_FEAT_POWER:
+ admhc_writel(ahcd, ADMHC_PS_SPP,
+ &ahcd->regs->portstatus[wIndex]);
+ break;
+ case USB_PORT_FEAT_RESET:
+ retval = root_port_reset(ahcd, wIndex);
+ break;
+ default:
+ goto error;
+ }
+ break;
+
+ default:
+error:
+ /* "protocol stall" on error */
+ retval = -EPIPE;
+ }
+ return retval;
+}
+
projects / openwrt / svn-archive / archive.git / blobdiff