+++ /dev/null
-/*
- * Buffalo WZR-HP-G300NH2 board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mips_machine.h>
-#include <asm/mach-ar71xx/ar71xx.h>
-#include <asm/mach-ar71xx/gpio.h>
-
-#include "machtype.h"
-#include "devices.h"
-#include "dev-ap91-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-
-
-#define WZRHPG300NH2_MAC_OFFSET 0x20c
-#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x0060000,
- .size = 0x0100000,
- }, {
- .name = "rootfs",
- .offset = 0x0160000,
- .size = 0x1e90000,
- }, {
- .name = "user_property",
- .offset = 0x1ff0000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f90000,
- }
-};
-
-#endif /* CONFIG_MTD_PARTITIONS */
-
-
-
-static struct flash_platform_data wzrhpg300nh2_flash_data = {
-#ifdef CONFIG_MTD_PARTITIONS
- .parts = wzrhpg300nh2_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
-#endif
-};
-
-
-static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 16,
- .active_low = 1,
- },
-};
-
-static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
- {
- .name = "buffalo:blue:usb",
- .gpio = 4,
- .active_low = 1,
- },
- {
- .name = "buffalo:orange:security",
- .gpio = 6,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:router",
- .gpio = 7,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:movie_engine_on",
- .gpio = 8,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:movie_engine_off",
- .gpio = 9,
- .active_low = 1,
- },
-};
-
-/* The AOSS button is wmac gpio 12 */
-static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 1,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 1,
- }, {
- .desc = "qos",
- .type = EV_KEY,
- .code = BTN_3,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 11,
- .active_low = 0,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 8,
- .active_low = 0,
- },
-};
-
-
-static void __init wzrhpg300nh2_setup(void)
-{
-
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
- /* There is an eth1 but it is not connected to the switch */
-
- ar71xx_add_device_m25p80_multi(&wzrhpg300nh2_flash_data);
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0);
- ar71xx_add_device_mdio(0, ~(BIT(0)));
-
- ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac0, 0);
- ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ar71xx_eth0_data.speed = SPEED_1000;
- ar71xx_eth0_data.duplex = DUPLEX_FULL;
- ar71xx_eth0_data.phy_mask = BIT(0);
-
- ar71xx_add_device_eth(0);
- ar71xx_add_device_usb();
- /* gpio13 is usb power. Turn it on. */
- gpio_request(13, "usb");
- gpio_direction_output(13, 1);
-
- ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
- wzrhpg300nh2_leds_gpio);
- ar71xx_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
- wzrhpg300nh2_gpio_keys);
- ap91_pci_setup_wmac_led_pin(5);
- ap91_pci_setup_wmac_leds(wzrhpg300nh2_wmac_leds_gpio,
- ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
-
- ap91_pci_init(eeprom, mac0);
-}
-
-MIPS_MACHINE(AR71XX_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
- "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
-
projects / openwrt / svn-archive / archive.git / blobdiff