ar71xx: move micrel PHY driver to the generic linux target

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / files / drivers / net / phy / micrel.c

diff --git a/target/linux/ar71xx/files/drivers/net/phy/micrel.c b/target/linux/ar71xx/files/drivers/net/phy/micrel.c
deleted file mode 100644 (file)
index 1499d4a..0000000
--- a/target/linux/ar71xx/files/drivers/net/phy/micrel.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  Driver for Micrel/Kendin PHYs
- *
- *  Copyright (c) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-
-#define KSZ_REG_INT_CTRL       0x1b
-
-#define KSZ_INT_LU_EN  (1 << 8)        /* enable Link Up interrupt */
-#define KSZ_INT_RF_EN  (1 << 9)        /* enable Remote Fault interrupt */
-#define KSZ_INT_LD_EN  (1 << 10)       /* enable Link Down interrupt */
-
-#define KSZ_INT_INIT   (KSZ_INT_LU_EN | KSZ_INT_LD_EN)
-
-static int ksz8041_ack_interrupt(struct phy_device *phydev)
-{
-       int err;
-
-       err = phy_read(phydev, KSZ_REG_INT_CTRL);
-
-       return (err < 0) ? err : 0;
-}
-
-static int ksz8041_config_intr(struct phy_device *phydev)
-{
-       int err;
-
-       if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-               err = phy_write(phydev, KSZ_REG_INT_CTRL,
-                               KSZ_INT_INIT);
-       else
-               err = phy_write(phydev, KSZ_REG_INT_CTRL, 0);
-
-       return err;
-}
-
-static struct phy_driver ksz8041_phy_driver = {
-       .phy_id         = 0x00221512,
-       .name           = "Micrel KSZ8041",
-       .phy_id_mask    = 0x001fffff,
-       .features       = PHY_BASIC_FEATURES,
-       .flags          = PHY_HAS_INTERRUPT,
-       .config_aneg    = genphy_config_aneg,
-       .read_status    = genphy_read_status,
-       .ack_interrupt  = ksz8041_ack_interrupt,
-       .config_intr    = ksz8041_config_intr,
-       .driver = {
-               .owner  = THIS_MODULE,
-       },
-};
-
-static int __init micrel_phy_init(void)
-{
-       return phy_driver_register(&ksz8041_phy_driver);
-}
-
-static void __exit micrel_phy_exit(void)
-{
-       phy_driver_unregister(&ksz8041_phy_driver);
-}
-
-#ifdef MODULE
-module_init(micrel_phy_init);
-module_exit(micrel_phy_exit);
-#else
-subsys_initcall(micrel_phy_init);
-#endif
-
-MODULE_DESCRIPTION("Micrel/Kendin PHY driver");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
-MODULE_LICENSE("GPL v2");