ar71xx: remove linux 3.18 support

[openwrt/svn-archive/archive.git] / target / linux / ar71xx / patches-3.18 / 433-spi-rb4xx-cpld-driver.patch

diff --git a/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch
deleted file mode 100644 (file)
index 47f0c24..0000000
--- a/target/linux/ar71xx/patches-3.18/433-spi-rb4xx-cpld-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -647,6 +647,13 @@ config SPI_TLE62X0
-         sysfs interface, with each line presented as a kind of GPIO
-         exposing both switch control and diagnostic feedback.
- 
-+config SPI_RB4XX_CPLD
-+      tristate "MikroTik RB4XX CPLD driver"
-+      depends on ATH79_MACH_RB4XX
-+      help
-+        SPI driver for the Xilinx CPLD chip present on the
-+        MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -63,6 +63,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
- obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
- obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
-+obj-$(CONFIG_SPI_RB4XX_CPLD)          += spi-rb4xx-cpld.o
- obj-$(CONFIG_SPI_QUP)                 += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP)            += spi-rockchip.o
- obj-$(CONFIG_SPI_RSPI)                        += spi-rspi.o