strip the kernel version suffix from target directories, except for brcm-2.4 (the...

[openwrt/svn-archive/archive.git] / target / linux / at91-2.6 / patches-2.6.21 / 009-fdl-uartinit.patch

diff --git a/target/linux/at91-2.6/patches-2.6.21/009-fdl-uartinit.patch b/target/linux/at91-2.6/patches-2.6.21/009-fdl-uartinit.patch
deleted file mode 100644 (file)
index f2491f3..0000000
--- a/target/linux/at91-2.6/patches-2.6.21/009-fdl-uartinit.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c        2007-05-28 12:22:29.000000000 +0200
-+++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c     2007-05-28 16:44:36.000000000 +0200
-@@ -618,7 +618,6 @@
- 
- 
- #if defined(CONFIG_NEW_LEDS)
--
- static struct platform_device at91_leds = {
-       .name           = "at91_leds",
-       .id             = -1,
-@@ -724,6 +723,10 @@
-        *  We need to drive the pin manually.  Default is off (RTS is active low).
-        */
-       at91_set_gpio_output(AT91_PIN_PA21, 1);
-+      at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
-+      at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
-+      at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
-+      at91_set_deglitch(AT91_PIN_PA19, 1);
- }
- 
- static struct resource uart1_resources[] = {
-@@ -835,6 +838,12 @@
- {
-       at91_set_B_periph(AT91_PIN_PA5, 1);             /* TXD3 */
-       at91_set_B_periph(AT91_PIN_PA6, 0);             /* RXD3 */
-+      at91_set_B_periph(AT91_PIN_PB0, 0);   /* RTS3 */
-+      at91_set_B_periph(AT91_PIN_PB1, 0);   /* CTS3 */
-+      at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
-+      at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
-+      at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
-+      at91_set_deglitch(AT91_PIN_PA24, 1);
- }
- 
- struct platform_device *at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */