-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach-at91/Kconfig
---- linux-2.6.25/arch/arm/mach-at91/Kconfig 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/Kconfig 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
@@ -12,18 +12,28 @@
config ARCH_AT91SAM9260
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mach-at91/Makefile
---- linux-2.6.25/arch/arm/mach-at91/Makefile 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/Makefile 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
@@ -28,16 +28,26 @@
obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/mach-at91/at91cap9.c
---- linux-2.6.25/arch/arm/mach-at91/at91cap9.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91cap9.c 2008-05-05 22:01:39.000000000 +0200
+--- a/arch/arm/mach-at91/at91cap9.c
++++ b/arch/arm/mach-at91/at91cap9.c
@@ -13,12 +13,15 @@
*/
}
/* --------------------------------------------------------------------
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/arch/arm/mach-at91/at91cap9_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91cap9_devices.c 2008-05-05 22:01:39.000000000 +0200
+--- a/arch/arm/mach-at91/at91cap9_devices.c
++++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -13,18 +13,20 @@
*/
#include <asm/mach/arch.h>
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91rm9200_devices.c
++++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -513,7 +513,18 @@
* SPI
* -------------------------------------------------------------------- */
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arch/arm/mach-at91/at91rm9200_time.c
---- linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91rm9200_time.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91rm9200_time.c
++++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -136,8 +136,6 @@
u32 alm;
int status = 0;
/* Use "raw" primitives so we behave correctly on RT kernels. */
raw_local_irq_save(flags);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/arm/mach-at91/at91sam9260.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9260.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9260.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9260.c
++++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,6 +11,7 @@
*/
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9260_devices.c
++++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -19,8 +19,8 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/arm/mach-at91/at91sam9261.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9261.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9261.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9261.c
++++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,12 +11,14 @@
*/
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9261_devices.c
++++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,7 +24,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/at91sam9261.h>
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/arm/mach-at91/at91sam9263.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9263.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9263.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9263.c
++++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,12 +11,14 @@
*/
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
/* Init clock subsystem */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c 2008-04-25 21:16:23.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9263_devices.c
++++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -22,8 +22,8 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/arch/arm/mach-at91/at91sam926x_time.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam926x_time.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam926x_time.c
++++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -1,23 +1,20 @@
/*
- * linux/arch/arm/mach-at91/at91sam926x_time.c
+ .resume = at91sam926x_pit_reset,
};
-
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm/mach-at91/at91sam9rl.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9rl.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9rl.c
++++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,6 +10,7 @@
*/
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
/* Init clock subsystem */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c
---- linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c 2008-05-02 00:52:36.000000000 +0200
+--- a/arch/arm/mach-at91/at91sam9rl_devices.c
++++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -20,12 +20,107 @@
#include <asm/arch/gpio.h>
#include <asm/arch/at91sam9rl.h>
return 0;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/arm/mach-at91/board-cam60.c
---- linux-2.6.25/arch/arm/mach-at91/board-cam60.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-cam60.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-cam60.c
@@ -0,0 +1,180 @@
+/*
+ * KwikByte CAM60 (KB9260)
+ .init_irq = cam60_init_irq,
+ .init_machine = cam60_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/arm/mach-at91/board-cap9adk.c
---- linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-cap9adk.c 2008-05-05 22:01:39.000000000 +0200
+--- a/arch/arm/mach-at91/board-cap9adk.c
++++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -36,16 +36,14 @@
#include <asm/hardware.h>
#include <asm/setup.h>
at91_add_device_lcdc(&cap9adk_lcdc_data);
/* AC97 */
at91_add_device_ac97(&cap9adk_ac97_data);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-carmeva.c linux-2.6/arch/arm/mach-at91/board-carmeva.c
---- linux-2.6.25/arch/arm/mach-at91/board-carmeva.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-carmeva.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-carmeva.c
++++ b/arch/arm/mach-at91/board-carmeva.c
@@ -40,24 +40,21 @@
#include "generic.h"
}
MACHINE_START(CARMEVA, "Carmeva")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm/mach-at91/board-chub.c
---- linux-2.6.25/arch/arm/mach-at91/board-chub.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-chub.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-chub.c
@@ -0,0 +1,132 @@
+/*
+ * linux/arch/arm/mach-at91/board-chub.c
+ .init_irq = chub_init_irq,
+ .init_machine = chub_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/arm/mach-at91/board-csb337.c
---- linux-2.6.25/arch/arm/mach-at91/board-csb337.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-csb337.c 2008-05-02 00:05:42.000000000 +0200
+--- a/arch/arm/mach-at91/board-csb337.c
++++ b/arch/arm/mach-at91/board-csb337.c
@@ -61,6 +61,7 @@
/* Setup the LEDs */
};
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb637.c linux-2.6/arch/arm/mach-at91/board-csb637.c
---- linux-2.6.25/arch/arm/mach-at91/board-csb637.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-csb637.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-csb637.c
++++ b/arch/arm/mach-at91/board-csb637.c
@@ -40,27 +40,16 @@
#include "generic.h"
/* Serial */
at91_add_device_serial();
/* Ethernet */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/mach-at91/board-dk.c
---- linux-2.6.25/arch/arm/mach-at91/board-dk.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-dk.c 2008-05-03 00:44:06.000000000 +0200
+--- a/arch/arm/mach-at91/board-dk.c
++++ b/arch/arm/mach-at91/board-dk.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/mm.h>
}
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-eb9200.c linux-2.6/arch/arm/mach-at91/board-eb9200.c
---- linux-2.6.25/arch/arm/mach-at91/board-eb9200.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-eb9200.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-eb9200.c
++++ b/arch/arm/mach-at91/board-eb9200.c
@@ -40,24 +40,24 @@
#include "generic.h"
}
static void __init eb9200_init_irq(void)
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/arm/mach-at91/board-ecbat91.c
---- linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-ecbat91.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -0,0 +1,178 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
+ .init_irq = ecb_at91init_irq,
+ .init_machine = ecb_at91board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/mach-at91/board-ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-ek.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-ek.c 2008-05-03 00:44:38.000000000 +0200
+--- a/arch/arm/mach-at91/board-ek.c
++++ b/arch/arm/mach-at91/board-ek.c
@@ -25,6 +25,7 @@
#include <linux/init.h>
#include <linux/mm.h>
}
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-homematic.c linux-2.6/arch/arm/mach-at91/board-homematic.c
---- linux-2.6.25/arch/arm/mach-at91/board-homematic.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-homematic.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-homematic.c
@@ -0,0 +1,163 @@
+/*
+ * linux/arch/arm/mach-at91/board-homematic.c
+ .init_irq = homematic_init_irq,
+ .init_machine = homematic_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/arm/mach-at91/board-kb9202.c
---- linux-2.6.25/arch/arm/mach-at91/board-kb9202.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-kb9202.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-kb9202.c
++++ b/arch/arm/mach-at91/board-kb9202.c
@@ -37,19 +37,10 @@
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
}
MACHINE_START(KB9200, "KB920x")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c linux-2.6/arch/arm/mach-at91/board-qil-a9260.c
---- linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-qil-a9260.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -0,0 +1,255 @@
+/*
+ * linux/arch/arm/mach-at91/board-qil-a9260.c
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-at91/board-sam9-l9260.c
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arch/arm/mach-at91/board-sam9260ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9260ek.c 2008-05-01 23:56:24.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9260ek.c
++++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -25,6 +25,10 @@
#include <linux/module.h>
#include <linux/platform_device.h>
}
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arch/arm/mach-at91/board-sam9261ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9261ek.c 2008-05-01 23:53:20.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9261ek.c
++++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -26,6 +26,8 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
}
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arch/arm/mach-at91/board-sam9263ek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9263ek.c 2008-05-01 23:53:20.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9263ek.c
++++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -43,29 +43,24 @@
#include <asm/arch/board.h>
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch/arm/mach-at91/board-sam9rlek.c
---- linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c 2008-05-03 00:15:33.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-sam9rlek.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/board-sam9rlek.c
++++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -29,29 +29,24 @@
#include <asm/arch/board.h>
}
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/mach-at91/board-tms.c
---- linux-2.6.25/arch/arm/mach-at91/board-tms.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-tms.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-tms.c
@@ -0,0 +1,198 @@
+/*
+* linux/arch/arm/mach-at91/board-tms.c
+ .init_irq = tms_init_irq,
+ .init_machine = tms_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tt9200.c linux-2.6/arch/arm/mach-at91/board-tt9200.c
---- linux-2.6.25/arch/arm/mach-at91/board-tt9200.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-tt9200.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-tt9200.c
@@ -0,0 +1,192 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-tt9200.c
+ .init_irq = tt9200_init_irq,
+ .init_machine = tt9200_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c linux-2.6/arch/arm/mach-at91/board-usb-a9260.c
---- linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-usb-a9260.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -0,0 +1,215 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9260.c
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c linux-2.6/arch/arm/mach-at91/board-usb-a9263.c
---- linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/board-usb-a9263.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -0,0 +1,230 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a9263.c
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach-at91/clock.c
---- linux-2.6.25/arch/arm/mach-at91/clock.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/clock.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/clock.c
++++ b/arch/arm/mach-at91/clock.c
@@ -32,6 +32,7 @@
#include <asm/arch/cpu.h>
/* MCK and CPU clock are "always on" */
clk_enable(&mck);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/mach-at91/generic.h
---- linux-2.6.25/arch/arm/mach-at91/generic.h 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/generic.h 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/generic.h
++++ b/arch/arm/mach-at91/generic.h
@@ -41,6 +41,7 @@
/* Power Management */
extern void at91_irq_suspend(void);
/* GPIO */
#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-at91/gpio.c
---- linux-2.6.25/arch/arm/mach-at91/gpio.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/gpio.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/gpio.c
++++ b/arch/arm/mach-at91/gpio.c
@@ -490,7 +490,8 @@
/*--------------------------------------------------------------------------*/
if (last && last->id == data->id)
last->next = data;
}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/mach-at91/ics1523.c
---- linux-2.6.25/arch/arm/mach-at91/ics1523.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/ics1523.c 2008-04-25 21:15:43.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/ics1523.c
@@ -0,0 +1,208 @@
+/*
+ * arch/arm/mach-at91rm9200/ics1523.c
+
+ return ack;
+}
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at91/pm.c
---- linux-2.6.25/arch/arm/mach-at91/pm.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/pm.c 2008-04-25 21:15:43.000000000 +0200
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
@@ -26,12 +26,144 @@
#include <asm/mach-types.h>
return 0;
}
arch_initcall(at91_pm_init);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/arm/mach-at91/pm_slowclock.S
---- linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-at91/pm_slowclock.S 2008-05-03 01:00:33.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -0,0 +1,283 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+
+ENTRY(at91_slow_clock_sz)
+ .word .-at91_slow_clock
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/Makefile linux-2.6/arch/arm/mach-ks8695/Makefile
---- linux-2.6.25/arch/arm/mach-ks8695/Makefile 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/Makefile 2007-12-31 15:04:45.000000000 +0200
+--- a/arch/arm/mach-ks8695/Makefile
++++ b/arch/arm/mach-ks8695/Makefile
@@ -11,5 +11,8 @@
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
+
# Board-specific support
obj-$(CONFIG_MACH_KS8695) += board-micrel.o
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/devices.c linux-2.6/arch/arm/mach-ks8695/devices.c
---- linux-2.6.25/arch/arm/mach-ks8695/devices.c 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/devices.c 2007-12-31 10:43:55.000000000 +0200
+--- a/arch/arm/mach-ks8695/devices.c
++++ b/arch/arm/mach-ks8695/devices.c
@@ -176,6 +176,27 @@
#endif
/* -------------------------------------------------------------------- */
/*
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/gpio.c linux-2.6/arch/arm/mach-ks8695/gpio.c
---- linux-2.6.25/arch/arm/mach-ks8695/gpio.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/gpio.c 2007-12-31 14:49:20.000000000 +0200
+--- a/arch/arm/mach-ks8695/gpio.c
++++ b/arch/arm/mach-ks8695/gpio.c
@@ -136,9 +136,9 @@
/* set line state */
x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD);
}
EXPORT_SYMBOL(gpio_get_value);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/leds.c linux-2.6/arch/arm/mach-ks8695/leds.c
---- linux-2.6.25/arch/arm/mach-ks8695/leds.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/leds.c 2007-12-31 15:18:25.000000000 +0200
+--- /dev/null
++++ b/arch/arm/mach-ks8695/leds.c
@@ -0,0 +1,94 @@
+/*
+ * LED driver for KS8695-based boards.
+}
+
+__initcall(leds_init);
-diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/pci.c linux-2.6/arch/arm/mach-ks8695/pci.c
---- linux-2.6.25/arch/arm/mach-ks8695/pci.c 2008-05-03 00:15:44.000000000 +0200
-+++ linux-2.6/arch/arm/mach-ks8695/pci.c 2008-05-08 22:03:41.000000000 +0200
+--- a/arch/arm/mach-ks8695/pci.c
++++ b/arch/arm/mach-ks8695/pci.c
@@ -141,7 +141,7 @@
.write = ks8695_pci_writeconfig,
};
{
return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys);
}
-diff -urN -x CVS linux-2.6.25/drivers/char/Kconfig linux-2.6/drivers/char/Kconfig
---- linux-2.6.25/drivers/char/Kconfig 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/char/Kconfig 2008-03-09 15:14:46.000000000 +0200
+--- a/drivers/char/Kconfig
++++ b/drivers/char/Kconfig
@@ -1056,5 +1056,21 @@
source "drivers/s390/char/Kconfig"
+
endmenu
-diff -urN -x CVS linux-2.6.25/drivers/char/Makefile linux-2.6/drivers/char/Makefile
---- linux-2.6.25/drivers/char/Makefile 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/char/Makefile 2008-03-09 15:14:46.000000000 +0200
+--- a/drivers/char/Makefile
++++ b/drivers/char/Makefile
@@ -98,6 +98,8 @@
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
obj-$(CONFIG_GPIO_TB0219) += tb0219.o
obj-$(CONFIG_MWAVE) += mwave/
obj-$(CONFIG_AGP) += agp/
-diff -urN -x CVS linux-2.6.25/drivers/char/at91_spi.c linux-2.6/drivers/char/at91_spi.c
---- linux-2.6.25/drivers/char/at91_spi.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/char/at91_spi.c 2008-04-18 17:38:01.000000000 +0200
+--- /dev/null
++++ b/drivers/char/at91_spi.c
@@ -0,0 +1,337 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder)
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200")
+MODULE_ALIAS("platform:at91_spi");
-diff -urN -x CVS linux-2.6.25/drivers/char/at91_spidev.c linux-2.6/drivers/char/at91_spidev.c
---- linux-2.6.25/drivers/char/at91_spidev.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/char/at91_spidev.c 2007-12-31 15:18:43.000000000 +0200
+--- /dev/null
++++ b/drivers/char/at91_spidev.c
@@ -0,0 +1,233 @@
+/*
+ * User-space interface to the SPI bus on Atmel AT91RM9200
+MODULE_LICENSE("GPL")
+MODULE_AUTHOR("Andrew Victor")
+MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200")
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/busses/Kconfig
---- linux-2.6.25/drivers/i2c/busses/Kconfig 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/Kconfig 2008-04-02 22:11:28.000000000 +0200
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
@@ -88,6 +88,14 @@
to support combined I2C messages. Use the i2c-gpio driver
unless your system can cope with those limitations.
config I2C_PCA_ISA
tristate "PCA9564 on an ISA bus"
depends on ISA
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/busses/Makefile
---- linux-2.6.25/drivers/i2c/busses/Makefile 2008-05-03 00:15:47.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/Makefile 2008-03-09 15:14:46.000000000 +0200
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2c/busses/i2c-at91.c
---- linux-2.6.25/drivers/i2c/busses/i2c-at91.c 2008-05-03 00:15:35.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/i2c-at91.c 2008-01-16 13:15:34.000000000 +0200
+--- a/drivers/i2c/busses/i2c-at91.c
++++ b/drivers/i2c/busses/i2c-at91.c
@@ -31,8 +31,11 @@
#include <asm/arch/board.h>
#include <asm/arch/cpu.h>
}
at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv);
-diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c/busses/i2c-pca.c
---- linux-2.6.25/drivers/i2c/busses/i2c-pca.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/i2c/busses/i2c-pca.c 2007-12-31 15:18:43.000000000 +0200
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-pca.c
@@ -0,0 +1,213 @@
+/*
+ * Platform driver for PCA9564 I2C bus controller.
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("PCA9564 platform driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.25/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/host/at91_mci.c
---- linux-2.6.25/drivers/mmc/host/at91_mci.c 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/mmc/host/at91_mci.c 2008-04-18 17:32:40.000000000 +0200
+--- a/drivers/mmc/host/at91_mci.c
++++ b/drivers/mmc/host/at91_mci.c
@@ -659,13 +659,14 @@
/* maybe switch power to the card */
if (host->board->vcc_pin) {
}
}
}
-diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/devices/Kconfig
---- linux-2.6.25/drivers/mtd/devices/Kconfig 2008-05-03 00:15:36.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/Kconfig 2007-12-31 10:44:25.000000000 +0200
+--- a/drivers/mtd/devices/Kconfig
++++ b/drivers/mtd/devices/Kconfig
@@ -270,5 +270,17 @@
LinuxBIOS or if you need to recover a DiskOnChip Millennium on which
you have managed to wipe the first block.
+ Always add the whole DataFlash device when using MTD partitions.
+endmenu
-diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Makefile linux-2.6/drivers/mtd/devices/Makefile
---- linux-2.6.25/drivers/mtd/devices/Makefile 2008-05-03 00:15:36.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/Makefile 2007-12-31 10:48:27.000000000 +0200
+--- a/drivers/mtd/devices/Makefile
++++ b/drivers/mtd/devices/Makefile
@@ -17,3 +17,4 @@
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
+obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o
-diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/at91_dataflash.c linux-2.6/drivers/mtd/devices/at91_dataflash.c
---- linux-2.6.25/drivers/mtd/devices/at91_dataflash.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/mtd/devices/at91_dataflash.c 2007-12-31 15:18:43.000000000 +0200
+--- /dev/null
++++ b/drivers/mtd/devices/at91_dataflash.c
@@ -0,0 +1,673 @@
+/*
+ * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder)
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrew Victor");
+MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200");
-diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nand/Kconfig
---- linux-2.6.25/drivers/mtd/nand/Kconfig 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/mtd/nand/Kconfig 2008-04-18 17:52:53.000000000 +0200
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
@@ -273,12 +273,53 @@
If you say "m", the module will be called "cs553x_nand.ko".
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
depends on MTD_NAND && MACH_ARMCORE
-diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd/nand/at91_nand.c
---- linux-2.6.25/drivers/mtd/nand/at91_nand.c 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/mtd/nand/at91_nand.c 2008-05-03 00:53:39.000000000 +0200
+--- a/drivers/mtd/nand/at91_nand.c
++++ b/drivers/mtd/nand/at91_nand.c
@@ -9,6 +9,15 @@
* Derived from drivers/mtd/spia.c
* Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
MODULE_AUTHOR("Rick Bronson");
-MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9");
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/Kconfig linux-2.6/drivers/net/arm/Kconfig
---- linux-2.6.25/drivers/net/arm/Kconfig 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/net/arm/Kconfig 2008-03-04 21:52:40.000000000 +0200
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
@@ -47,3 +47,10 @@
help
This is a driver for the ethernet hardware included in EP93xx CPUs.
+ help
+ If you wish to compile a kernel for an KS8695-based board
+ and enable Ethernet support, then select this option.
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/Makefile linux-2.6/drivers/net/arm/Makefile
---- linux-2.6.25/drivers/net/arm/Makefile 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/net/arm/Makefile 2008-03-04 21:51:41.000000000 +0200
+--- a/drivers/net/arm/Makefile
++++ b/drivers/net/arm/Makefile
@@ -9,3 +9,4 @@
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
+obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695_ether.o
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net/arm/at91_ether.c
---- linux-2.6.25/drivers/net/arm/at91_ether.c 2008-05-03 00:15:48.000000000 +0200
-+++ linux-2.6/drivers/net/arm/at91_ether.c 2008-05-08 21:47:22.000000000 +0200
+--- a/drivers/net/arm/at91_ether.c
++++ b/drivers/net/arm/at91_ether.c
@@ -220,7 +220,7 @@
if (!(phy & (1 << 0)))
goto done;
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
MODULE_AUTHOR("Andrew Victor");
+MODULE_ALIAS("platform:" DRV_NAME);
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.h linux-2.6/drivers/net/arm/at91_ether.h
---- linux-2.6.25/drivers/net/arm/at91_ether.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/drivers/net/arm/at91_ether.h 2008-05-08 21:47:31.000000000 +0200
+--- a/drivers/net/arm/at91_ether.h
++++ b/drivers/net/arm/at91_ether.h
@@ -48,6 +48,9 @@
/* Altima AC101L PHY */
#define MII_AC101L_ID 0x00225520
struct mii_if_info mii; /* ethtool support */
struct at91_eth_data board_data; /* board-specific configuration */
struct clk *ether_clk; /* clock */
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.c linux-2.6/drivers/net/arm/ks8695_ether.c
---- linux-2.6.25/drivers/net/arm/ks8695_ether.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/net/arm/ks8695_ether.c 2008-05-08 21:52:35.000000000 +0200
+--- /dev/null
++++ b/drivers/net/arm/ks8695_ether.c
@@ -0,0 +1,1009 @@
+/*
+ * Ethernet driver for the Kendin/Micrel KS8695.
+MODULE_DESCRIPTION("KS8695 Ethernet driver");
+MODULE_AUTHOR("Andrew Victor");
+MODULE_ALIAS("platform:" DRV_NAME);
-diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.h linux-2.6/drivers/net/arm/ks8695_ether.h
---- linux-2.6.25/drivers/net/arm/ks8695_ether.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/net/arm/ks8695_ether.h 2008-05-08 21:51:23.000000000 +0200
+--- /dev/null
++++ b/drivers/net/arm/ks8695_ether.h
@@ -0,0 +1,92 @@
+/*
+ * Ethernet driver for the Micrel/Kendin KS8695 (Centaur)
+};
+
+#endif
-diff -urN -x CVS linux-2.6.25/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig
---- linux-2.6.25/drivers/rtc/Kconfig 2008-05-03 00:15:49.000000000 +0200
-+++ linux-2.6/drivers/rtc/Kconfig 2008-04-15 21:48:11.000000000 +0200
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
@@ -487,12 +487,12 @@
this is powered by the backup power supply.
(On AT91SAM9rl chips you probably want to use the dedicated RTC
module and leave the RTT available for other uses.)
-diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc/rtc-at91rm9200.c
---- linux-2.6.25/drivers/rtc/rtc-at91rm9200.c 2008-05-03 00:15:49.000000000 +0200
-+++ linux-2.6/drivers/rtc/rtc-at91rm9200.c 2008-04-25 23:15:05.000000000 +0200
+--- a/drivers/rtc/rtc-at91rm9200.c
++++ b/drivers/rtc/rtc-at91rm9200.c
@@ -29,9 +29,6 @@
#include <linux/completion.h>
rtc = rtc_device_register(pdev->name, &pdev->dev,
&at91_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
-diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/rtc-at91sam9.c
---- linux-2.6.25/drivers/rtc/rtc-at91sam9.c 2008-05-03 00:15:49.000000000 +0200
-+++ linux-2.6/drivers/rtc/rtc-at91sam9.c 2008-05-05 22:01:39.000000000 +0200
+--- a/drivers/rtc/rtc-at91sam9.c
++++ b/drivers/rtc/rtc-at91sam9.c
@@ -21,6 +21,7 @@
#include <asm/mach/time.h>
platform_set_drvdata(pdev, rtc);
rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS);
rtc->rtt += r->start;
-diff -urN -x CVS linux-2.6.25/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig
---- linux-2.6.25/drivers/spi/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/spi/Kconfig 2008-03-09 15:14:53.000000000 +0200
-@@ -105,6 +105,15 @@
- inexpensive battery powered microcontroller evaluation board.
- This same cable can be used to flash new firmware.
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -113,6 +113,15 @@
+
+ If unsure, say N.
+config SPI_AT91
+ tristate "AT91RM9200 Bitbang SPI Master"
config SPI_IMX
tristate "Freescale iMX SPI controller"
depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
-diff -urN -x CVS linux-2.6.25/drivers/spi/Makefile linux-2.6/drivers/spi/Makefile
---- linux-2.6.25/drivers/spi/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/spi/Makefile 2008-03-09 17:54:27.000000000 +0200
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
@@ -29,6 +29,7 @@
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
-diff -urN -x CVS linux-2.6.25/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/spi/spi_at91_bitbang.c
---- linux-2.6.25/drivers/spi/spi_at91_bitbang.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/spi/spi_at91_bitbang.c 2008-04-18 17:38:19.000000000 +0200
+--- /dev/null
++++ b/drivers/spi/spi_at91_bitbang.c
@@ -0,0 +1,208 @@
+/*
+ * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION)
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at91_spi");
-diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/gadget/Kconfig
---- linux-2.6.25/drivers/usb/gadget/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/Kconfig 2008-04-18 19:23:34.000000000 +0200
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
@@ -118,10 +118,10 @@
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
config USB_ATMEL_USBA
tristate
-diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/usb/gadget/at91_udc.c
---- linux-2.6.25/drivers/usb/gadget/at91_udc.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/at91_udc.c 2008-04-15 21:48:12.000000000 +0200
+--- a/drivers/usb/gadget/at91_udc.c
++++ b/drivers/usb/gadget/at91_udc.c
@@ -1827,7 +1827,7 @@
*/
if ((!udc->suspended && udc->addr)
pullup(udc, 0);
wake = 0;
} else
-diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/drivers/usb/gadget/atmel_usba_udc.c
---- linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/gadget/atmel_usba_udc.c 2008-05-03 01:07:46.000000000 +0200
+--- a/drivers/usb/gadget/atmel_usba_udc.c
++++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -18,6 +18,7 @@
#include <linux/platform_device.h>
#include <linux/usb/ch9.h>
usba_ep_cleanup_debugfs(&usba_ep[i]);
usba_cleanup_debugfs(udc);
-diff -urN -x CVS linux-2.6.25/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb/host/ohci-at91.c
---- linux-2.6.25/drivers/usb/host/ohci-at91.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/usb/host/ohci-at91.c 2008-04-15 21:48:12.000000000 +0200
+--- a/drivers/usb/host/ohci-at91.c
++++ b/drivers/usb/host/ohci-at91.c
@@ -330,7 +330,7 @@
*
* REVISIT: some boards will be able to turn VBUS off...
ohci_usb_reset (ohci);
at91_stop_clock();
}
-diff -urN -x CVS linux-2.6.25/drivers/video/Kconfig linux-2.6/drivers/video/Kconfig
---- linux-2.6.25/drivers/video/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/Kconfig 2008-04-02 22:11:30.000000000 +0200
+--- a/drivers/video/Kconfig
++++ b/drivers/video/Kconfig
@@ -889,6 +889,17 @@
framebuffer. Product specs at
<http://www.erd.epson.com/vdc/html/products.htm>.
config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
depends on FB
-diff -urN -x CVS linux-2.6.25/drivers/video/Makefile linux-2.6/drivers/video/Makefile
---- linux-2.6.25/drivers/video/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/Makefile 2008-04-02 22:11:30.000000000 +0200
+--- a/drivers/video/Makefile
++++ b/drivers/video/Makefile
@@ -87,7 +87,8 @@
obj-$(CONFIG_FB_SA1100) += sa1100fb.o
obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -urN -x CVS linux-2.6.25/drivers/video/atmel_lcdfb.c linux-2.6/drivers/video/atmel_lcdfb.c
---- linux-2.6.25/drivers/video/atmel_lcdfb.c 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/atmel_lcdfb.c 2008-04-03 00:27:47.000000000 +0200
+--- a/drivers/video/atmel_lcdfb.c
++++ b/drivers/video/atmel_lcdfb.c
@@ -31,7 +31,7 @@
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
.driver = {
.name = "atmel_lcdfb",
.owner = THIS_MODULE,
-diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Kconfig linux-2.6/drivers/video/backlight/Kconfig
---- linux-2.6.25/drivers/video/backlight/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/Kconfig 2008-03-09 18:51:50.000000000 +0200
+--- a/drivers/video/backlight/Kconfig
++++ b/drivers/video/backlight/Kconfig
@@ -112,3 +112,11 @@
help
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
+ help
+ If you have a KwikByte KB9202 board, say Y to enable the
+ backlight driver.
-diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Makefile linux-2.6/drivers/video/backlight/Makefile
---- linux-2.6.25/drivers/video/backlight/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/Makefile 2008-03-09 15:14:55.000000000 +0200
+--- a/drivers/video/backlight/Makefile
++++ b/drivers/video/backlight/Makefile
@@ -10,3 +10,4 @@
obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o
obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o
obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o
+obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o
-diff -urN -x CVS linux-2.6.25/drivers/video/backlight/kb920x_bl.c linux-2.6/drivers/video/backlight/kb920x_bl.c
---- linux-2.6.25/drivers/video/backlight/kb920x_bl.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/video/backlight/kb920x_bl.c 2008-03-09 21:41:20.000000000 +0200
+--- /dev/null
++++ b/drivers/video/backlight/kb920x_bl.c
@@ -0,0 +1,164 @@
+/*
+ * Backlight Driver for KB9202
+MODULE_AUTHOR("KwikByte <kb9200_dev@kwikbyte.com>");
+MODULE_DESCRIPTION("KB9202 Backlight Driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.25/drivers/video/s1d15605fb.c linux-2.6/drivers/video/s1d15605fb.c
---- linux-2.6.25/drivers/video/s1d15605fb.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/video/s1d15605fb.c 2008-05-03 00:36:04.000000000 +0200
+--- /dev/null
++++ b/drivers/video/s1d15605fb.c
@@ -0,0 +1,655 @@
+/*
+ * drivers/video/s1d15605.c
+MODULE_AUTHOR("KwikByte");
+MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver");
+MODULE_LICENSE("GPL");
-diff -urN -x CVS linux-2.6.25/drivers/watchdog/Kconfig linux-2.6/drivers/watchdog/Kconfig
---- linux-2.6.25/drivers/watchdog/Kconfig 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/watchdog/Kconfig 2008-03-09 15:14:55.000000000 +0200
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
@@ -66,6 +66,14 @@
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.
config 21285_WATCHDOG
tristate "DC21285 watchdog"
depends on FOOTBRIDGE
-diff -urN -x CVS linux-2.6.25/drivers/watchdog/Makefile linux-2.6/drivers/watchdog/Makefile
---- linux-2.6.25/drivers/watchdog/Makefile 2008-05-03 00:15:50.000000000 +0200
-+++ linux-2.6/drivers/watchdog/Makefile 2008-03-09 15:14:55.000000000 +0200
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
@@ -26,6 +26,7 @@
# ARM Architecture
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
-diff -urN -x CVS linux-2.6.25/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/watchdog/at91sam9_wdt.c
---- linux-2.6.25/drivers/watchdog/at91sam9_wdt.c 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/drivers/watchdog/at91sam9_wdt.c 2008-04-15 21:53:41.000000000 +0200
+--- /dev/null
++++ b/drivers/watchdog/at91sam9_wdt.c
@@ -0,0 +1,259 @@
+/*
+ * Watchdog driver for Atmel AT91SAM9x processors.
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform:at91_wdt");
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/include/asm-arm/arch-at91/at91_ecc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_ecc.h 2008-05-07 23:49:32.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_ecc.h
++++ b/include/asm-arm/arch-at91/at91_ecc.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_ecc.h
#define AT91_ECC_NPARITY (0xffff << 0) /* NParity */
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h linux-2.6/include/asm-arm/arch-at91/at91_pit.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_pit.h 2008-05-07 23:49:57.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_pit.h
++++ b/include/asm-arm/arch-at91/at91_pit.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_pit.h
* Periodic Interval Timer (PIT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/include/asm-arm/arch-at91/at91_pmc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_pmc.h 2008-05-05 22:01:39.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_pmc.h
++++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -23,6 +23,7 @@
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
+#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */
+
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h linux-2.6/include/asm-arm/arch-at91/at91_rstc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_rstc.h 2008-05-07 23:50:10.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_rstc.h
++++ b/include/asm-arm/arch-at91/at91_rstc.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_rstc.h
* Reset Controller (RSTC) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/include/asm-arm/arch-at91/at91_rtt.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_rtt.h 2008-05-07 23:51:11.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_rtt.h
++++ b/include/asm-arm/arch-at91/at91_rtt.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_rtt.h
* Real-time Timer (RTT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h 2008-05-07 23:50:23.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_shdwc.h
++++ b/include/asm-arm/arch-at91/at91_shdwc.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_shdwc.h
+#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h linux-2.6/include/asm-arm/arch-at91/at91_tsc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_tsc.h 2008-05-07 23:51:32.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91_tsc.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-arm/arch-at91/at91_tsc.h
+
+#endif
+
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h linux-2.6/include/asm-arm/arch-at91/at91_wdt.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91_wdt.h 2008-05-07 23:51:43.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91_wdt.h
++++ b/include/asm-arm/arch-at91/at91_wdt.h
@@ -1,6 +1,9 @@
/*
* include/asm-arm/arch-at91/at91_wdt.h
* Watchdog Timer (WDT) - System peripherals regsters.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h linux-2.6/include/asm-arm/arch-at91/at91cap9.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9.h 2008-05-05 22:01:39.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91cap9.h
++++ b/include/asm-arm/arch-at91/at91cap9.h
@@ -101,7 +101,10 @@
#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
#define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */
#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 2008-05-07 21:33:47.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h
@@ -0,0 +1,102 @@
+/*
+ * include/asm-arm/arch-at91/at91cap9_ddrsdr.h
+
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-04-18 19:20:34.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91cap9_matrix.h
++++ b/include/asm-arm/arch-at91/at91cap9_matrix.h
@@ -106,6 +106,11 @@
#define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */
#define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-05-07 12:07:13.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
++++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -1,6 +1,8 @@
/*
* include/asm-arm/arch-at91/at91sam9260_matrix.h
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9261_matrix.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9261_matrix.h 2008-05-07 12:07:24.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h
++++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h
@@ -1,6 +1,8 @@
/*
* include/asm-arm/arch-at91/at91sam9261_matrix.h
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h 1970-01-01 02:00:00.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam926x_mc.h
++++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam926x_mc.h
-#endif
-
-#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h linux-2.6/include/asm-arm/arch-at91/at91sam9_sdramc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9_sdramc.h 2008-05-07 23:51:59.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h
@@ -0,0 +1,86 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9_sdramc.h
+
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h linux-2.6/include/asm-arm/arch-at91/at91sam9_smc.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9_smc.h 2008-05-07 23:52:15.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/at91sam9_smc.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9_smc.h
+#endif
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h
---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h 2008-04-18 19:22:02.000000000 +0200
+--- a/include/asm-arm/arch-at91/at91sam9rl.h
++++ b/include/asm-arm/arch-at91/at91sam9rl.h
@@ -110,6 +110,6 @@
#define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */
+#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */
#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/board.h linux-2.6/include/asm-arm/arch-at91/board.h
---- linux-2.6.25/include/asm-arm/arch-at91/board.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/board.h 2008-05-02 00:40:32.000000000 +0200
+--- a/include/asm-arm/arch-at91/board.h
++++ b/include/asm-arm/arch-at91/board.h
@@ -36,6 +36,7 @@
#include <linux/i2c.h>
#include <linux/leds.h>
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/cpu.h linux-2.6/include/asm-arm/arch-at91/cpu.h
---- linux-2.6.25/include/asm-arm/arch-at91/cpu.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/cpu.h 2008-05-05 22:10:58.000000000 +0200
+--- a/include/asm-arm/arch-at91/cpu.h
++++ b/include/asm-arm/arch-at91/cpu.h
@@ -48,6 +48,17 @@
return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
}
#endif
/*
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/ics1523.h linux-2.6/include/asm-arm/arch-at91/ics1523.h
---- linux-2.6.25/include/asm-arm/arch-at91/ics1523.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/ics1523.h 2008-01-16 21:24:29.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/ics1523.h
@@ -0,0 +1,154 @@
+//*----------------------------------------------------------------------------
+//* ATMEL Microcontroller Software Support - ROUSSET -
+int at91_ics1523_init(void);
+
+#endif /* ics1523_h */
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/spi.h linux-2.6/include/asm-arm/arch-at91/spi.h
---- linux-2.6.25/include/asm-arm/arch-at91/spi.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/spi.h 2008-01-16 21:24:29.000000000 +0200
+--- /dev/null
++++ b/include/asm-arm/arch-at91/spi.h
@@ -0,0 +1,54 @@
+/*
+ * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200
+extern int spi_transfer(struct spi_transfer_list* list);
+
+#endif
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/timex.h linux-2.6/include/asm-arm/arch-at91/timex.h
---- linux-2.6.25/include/asm-arm/arch-at91/timex.h 2008-05-03 00:15:51.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-at91/timex.h 2008-04-18 18:30:40.000000000 +0200
+--- a/include/asm-arm/arch-at91/timex.h
++++ b/include/asm-arm/arch-at91/timex.h
@@ -27,14 +27,29 @@
#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
#define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16)
#elif defined(CONFIG_ARCH_AT91SAM9RL)
-diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-ks8695/devices.h linux-2.6/include/asm-arm/arch-ks8695/devices.h
---- linux-2.6.25/include/asm-arm/arch-ks8695/devices.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/asm-arm/arch-ks8695/devices.h 2007-12-31 10:44:34.000000000 +0200
+--- a/include/asm-arm/arch-ks8695/devices.h
++++ b/include/asm-arm/arch-ks8695/devices.h
@@ -18,6 +18,11 @@
extern void __init ks8695_add_device_lan(void);
extern void __init ks8695_add_device_hpna(void);
/* PCI */
#define KS8695_MODE_PCI 0
#define KS8695_MODE_MINIPCI 1
-diff -urN -x CVS linux-2.6.25/include/linux/clk.h linux-2.6/include/linux/clk.h
---- linux-2.6.25/include/linux/clk.h 2007-10-09 22:31:38.000000000 +0200
-+++ linux-2.6/include/linux/clk.h 2007-12-31 10:44:34.000000000 +0200
+--- a/include/linux/clk.h
++++ b/include/linux/clk.h
@@ -121,4 +121,24 @@
*/
struct clk *clk_get_parent(struct clk *clk);
+int clk_must_disable(struct clk *clk);
+
#endif
-diff -urN -x CVS linux-2.6.25/include/linux/i2c-id.h linux-2.6/include/linux/i2c-id.h
---- linux-2.6.25/include/linux/i2c-id.h 2008-05-03 00:15:52.000000000 +0200
-+++ linux-2.6/include/linux/i2c-id.h 2008-03-09 15:43:48.000000000 +0200
+--- a/include/linux/i2c-id.h
++++ b/include/linux/i2c-id.h
@@ -131,6 +131,7 @@
/* --- PCA 9564 based algorithms */
/* --- PowerPC on-chip adapters */
#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */
-diff -urN -x CVS linux-2.6.25/include/linux/usb/atmel_usba_udc.h linux-2.6/include/linux/usb/atmel_usba_udc.h
---- linux-2.6.25/include/linux/usb/atmel_usba_udc.h 1970-01-01 02:00:00.000000000 +0200
-+++ linux-2.6/include/linux/usb/atmel_usba_udc.h 2008-05-03 00:31:09.000000000 +0200
+--- /dev/null
++++ b/include/linux/usb/atmel_usba_udc.h
@@ -0,0 +1,23 @@
+/*
+* Platform data definitions for Atmel USBA gadget driver.
+
+#endif /* __LINUX_USB_USBA_H */
+
-diff -urN -x CVS linux-2.6.25/include/video/atmel_lcdc.h linux-2.6/include/video/atmel_lcdc.h
---- linux-2.6.25/include/video/atmel_lcdc.h 2008-05-03 00:15:53.000000000 +0200
-+++ linux-2.6/include/video/atmel_lcdc.h 2008-03-09 15:53:40.000000000 +0200
+--- a/include/video/atmel_lcdc.h
++++ b/include/video/atmel_lcdc.h
@@ -39,6 +39,7 @@
u8 bl_power;
#endif
u8 default_bpp;
unsigned int default_lcdcon2;
-diff -urN -x CVS linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc/at91/eti_b1_wm8731.c
---- linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c 2008-05-03 00:15:56.000000000 +0200
-+++ linux-2.6/sound/soc/at91/eti_b1_wm8731.c 2008-03-09 15:15:07.000000000 +0200
+--- a/sound/soc/at91/eti_b1_wm8731.c
++++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -33,8 +33,7 @@
#include <sound/soc.h>
#include <sound/soc-dapm.h>
/*
* Set PCK1 parent to PLLB and its rate to 12 Mhz.
-diff -urN -x CVS linux-2.6.25/sound/spi/at73c213.c linux-2.6/sound/spi/at73c213.c
---- linux-2.6.25/sound/spi/at73c213.c 2008-05-03 00:15:56.000000000 +0200
-+++ linux-2.6/sound/spi/at73c213.c 2008-03-09 15:15:07.000000000 +0200
+--- a/sound/spi/at73c213.c
++++ b/sound/spi/at73c213.c
@@ -114,7 +114,11 @@
static struct snd_pcm_hardware snd_at73c213_playback_hw = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
projects / openwrt / svn-archive / archive.git / blobdiff