[atheros] nuke trailing whitespaces

[openwrt/svn-archive/archive.git] / target / linux / atheros / files / drivers / net / ar2313 / ar2313.c

diff --git a/target/linux/atheros/files/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c
index 68fcb587be9e8012909e2181153039b7c366b397..fb1efa19c1677a86cf756c2a7dde4d26d213d6b3 100644 (file)
--- a/target/linux/atheros/files/drivers/net/ar2313/ar2313.c
+++ b/target/linux/atheros/files/drivers/net/ar2313/ar2313.c
@@ -14,7 +14,7 @@
  * (at your option) any later version.
  *
  * Additional credits:
- *     This code is taken from John Taylor's Sibyte driver and then 
+ *     This code is taken from John Taylor's Sibyte driver and then
  *     modified for the AR2313.
  */
 
@@ -134,7 +134,7 @@
 #define CRC_LEN                 4
 #define RX_OFFSET               2
 
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) 
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #define VLAN_HDR                4
 #else
 #define VLAN_HDR                0
@@ -232,8 +232,8 @@ int __init ar2313_probe(struct platform_device *pdev)
                return (-ENXIO);
        }
 
-       /* 
-        * When there's only one MAC, PHY regs are typically on ENET0, 
+       /*
+        * When there's only one MAC, PHY regs are typically on ENET0,
         * even though the MAC might be on ENET1.
         * Needto remap PHY regs separately in this case
         */
@@ -270,7 +270,7 @@ int __init ar2313_probe(struct platform_device *pdev)
        sp->board_idx = BOARD_IDX_STATIC;
 
        if (ar2313_init(dev)) {
-               /* 
+               /*
                 * ar2313_init() calls ar2313_init_cleanup() on error.
                 */
                kfree(dev);
@@ -295,7 +295,7 @@ int __init ar2313_probe(struct platform_device *pdev)
        sp->mii_bus.id = 0;
        sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL);
        *sp->mii_bus.irq = PHY_POLL;
-       
+
        mdiobus_register(&sp->mii_bus);
 
        if (mdiobus_probe(dev) != 0) {
@@ -308,7 +308,7 @@ int __init ar2313_probe(struct platform_device *pdev)
                /* start link poll timer */
                ar2313_setup_timer(dev);
        }
-       
+
        return 0;
 }
 
@@ -379,9 +379,9 @@ static void printMcList(struct net_device *dev)
  */
 static void ar2313_multicast_list(struct net_device *dev)
 {
-       /* 
-        * Always listen to broadcasts and 
-        * treat IFF bits independently 
+       /*
+        * Always listen to broadcasts and
+        * treat IFF bits independently
         */
        struct ar2313_private *sp = (struct ar2313_private *) dev->priv;
        unsigned int recognise;
@@ -420,7 +420,7 @@ static void rx_tasklet_cleanup(struct net_device *dev)
 {
        struct ar2313_private *sp = dev->priv;
 
-       /* 
+       /*
         * Tasklet may be scheduled. Need to get it removed from the list
         * since we're about to free the struct.
         */
@@ -442,7 +442,7 @@ static int __exit ar2313_remove(struct platform_device *pdev)
 
 
 /*
- * Restart the AR2313 ethernet controller. 
+ * Restart the AR2313 ethernet controller.
  */
 static int ar2313_restart(struct net_device *dev)
 {
@@ -606,7 +606,7 @@ static void ar2313_link_timer_fn(unsigned long data)
        // autonegotiated value of half or full duplex.
        ar2313_check_link(dev);
 
-       // Loop faster when we don't have link. 
+       // Loop faster when we don't have link.
        // This was needed to speed up the AP bootstrap time.
        if (sp->link == 0) {
                mod_timer(&sp->link_timer, jiffies + HZ / 2);
@@ -728,7 +728,7 @@ static int ar2313_init(struct net_device *dev)
        struct ar2313_private *sp = dev->priv;
        int ecode = 0;
 
-       /* 
+       /*
         * Allocate descriptors
         */
        if (ar2313_allocate_descriptors(dev)) {
@@ -738,7 +738,7 @@ static int ar2313_init(struct net_device *dev)
                goto init_error;
        }
 
-       /* 
+       /*
         * Get the memory for the skb rings.
         */
        if (sp->rx_skb == NULL) {
@@ -767,7 +767,7 @@ static int ar2313_init(struct net_device *dev)
        }
        memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
 
-       /* 
+       /*
         * Set tx_csm before we start receiving interrupts, otherwise
         * the interrupt handler might think it is supposed to process
         * tx ints before we are up and running, which may cause a null
@@ -778,23 +778,23 @@ static int ar2313_init(struct net_device *dev)
        sp->tx_prd = 0;
        sp->tx_csm = 0;
 
-       /* 
+       /*
         * Zero the stats before starting the interface
         */
        memset(&sp->stats, 0, sizeof(sp->stats));
 
-       /* 
+       /*
         * We load the ring here as there seem to be no way to tell the
         * firmware to wipe the ring without re-initializing it.
         */
        ar2313_load_rx_ring(dev, RX_RING_SIZE);
 
-       /* 
+       /*
         * Init hardware
         */
        ar2313_reset_reg(dev);
 
-       /* 
+       /*
         * Get the IRQ
         */
        ecode =
@@ -852,7 +852,7 @@ static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
                // partha: create additional room in the front for tx pkt capture
                skb_reserve(skb, 32);
 
-               /* 
+               /*
                 * Make sure IP header starts on a fresh cache line.
                 */
                skb->dev = dev;
@@ -899,7 +899,7 @@ static int ar2313_rx_int(struct net_device *dev)
 
        idx = sp->cur_rx;
 
-       /* process at most the entire ring and then wait for another interrupt 
+       /* process at most the entire ring and then wait for another interrupt
         */
        while (1) {
 
@@ -1081,7 +1081,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
        unsigned int status, enabled;
 
        /* clear interrupt */
-       /* 
+       /*
         * Don't clear RI bit if currently disabled.
         */
        status = sp->dma_regs->status;
@@ -1090,7 +1090,7 @@ static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
 
        if (status & DMA_STATUS_NIS) {
                /* normal status */
-               /* 
+               /*
                 * Don't schedule rx processing if interrupt
                 * is already disabled.
                 */
@@ -1178,12 +1178,12 @@ static void ar2313_halt(struct net_device *dev)
 static int ar2313_close(struct net_device *dev)
 {
 #if 0
-       /* 
+       /*
         * Disable interrupts
         */
        disable_irq(dev->irq);
 
-       /* 
+       /*
         * Without (or before) releasing irq and stopping hardware, this
         * is an absolute non-sense, by the way. It will be reset instantly
         * by the first irq.
@@ -1251,7 +1251,7 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
        struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data;
        struct ar2313_private *sp = dev->priv;
        int ret;
-       
+
        switch (cmd) {
 
        case SIOCETHTOOL:
@@ -1271,12 +1271,12 @@ static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
                        (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
                        return -EFAULT;
                return 0;
-       
+
        case SIOCGMIIPHY:
        case SIOCGMIIREG:
        case SIOCSMIIREG:
                return phy_mii_ioctl(sp->phy_dev, data, cmd);
-       
+
        default:
                break;
        }
@@ -1314,7 +1314,7 @@ static void ar2313_adjust_link(struct net_device *dev)
 #define MII_ADDR(phy, reg) \
        ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT))
 
-static int 
+static int
 mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
 {
        struct net_device *const dev = bus->priv;
@@ -1326,7 +1326,7 @@ mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
        return (ethernet->mii_data >> MII_DATA_SHIFT);
 }
 
-static int 
+static int
 mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
              u16 value)
 {