atheros: v3.18: move GPIO patches behind PCI
[openwrt/svn-archive/archive.git] / target / linux / atheros / patches-3.18 / 103-ar2315_gpio.patch
diff --git a/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch b/target/linux/atheros/patches-3.18/103-ar2315_gpio.patch
deleted file mode 100644 (file)
index 4b81171..0000000
+++ /dev/null
@@ -1,317 +0,0 @@
---- a/arch/mips/ath25/Kconfig
-+++ b/arch/mips/ath25/Kconfig
-@@ -7,4 +7,5 @@ config SOC_AR5312
- config SOC_AR2315
-       bool "Atheros 2315+ support"
-       depends on ATH25
-+      select GPIO_AR2315
-       default y
---- a/arch/mips/ath25/ar2315.c
-+++ b/arch/mips/ath25/ar2315.c
-@@ -236,6 +236,32 @@ static struct platform_device ar2315_wdt
-       .num_resources = ARRAY_SIZE(ar2315_wdt_res)
- };
-+static struct resource ar2315_gpio_res[] = {
-+      {
-+              .name = "ar2315-gpio",
-+              .flags = IORESOURCE_MEM,
-+              .start = AR2315_RST_BASE + AR2315_GPIO,
-+              .end = AR2315_RST_BASE + AR2315_GPIO + 0x10 - 1,
-+      },
-+      {
-+              .name = "ar2315-gpio",
-+              .flags = IORESOURCE_IRQ,
-+      },
-+      {
-+              .name = "ar2315-gpio-irq-base",
-+              .flags = IORESOURCE_IRQ,
-+              .start = AR231X_GPIO_IRQ_BASE,
-+              .end = AR231X_GPIO_IRQ_BASE,
-+      }
-+};
-+
-+static struct platform_device ar2315_gpio = {
-+      .id = -1,
-+      .name = "ar2315-gpio",
-+      .resource = ar2315_gpio_res,
-+      .num_resources = ARRAY_SIZE(ar2315_gpio_res)
-+};
-+
- #ifdef CONFIG_LEDS_GPIO
- static struct gpio_led ar2315_leds[6];
- static struct gpio_led_platform_data ar2315_led_data = {
-@@ -286,6 +312,11 @@ void __init ar2315_init_devices(void)
-       ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
-       ar2315_eth_data.macaddr = ath25_board.config->enet0_mac;
-+      ar2315_gpio_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
-+                                                    AR2315_MISC_IRQ_GPIO);
-+      ar2315_gpio_res[1].end = ar2315_gpio_res[1].start;
-+      platform_device_register(&ar2315_gpio);
-+
-       ar2315_init_gpio_leds();
-       ar2315_wdt_res[1].start = irq_create_mapping(ar2315_misc_irq_domain,
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -112,6 +112,13 @@ config GPIO_MAX730X
- comment "Memory mapped GPIO drivers:"
-+config GPIO_AR2315
-+      bool "AR2315 SoC GPIO support"
-+      default y if SOC_AR2315
-+      depends on SOC_AR2315
-+      help
-+        Say yes here to enable GPIO support for Atheros AR2315+ SoCs.
-+
- config GPIO_AR5312
-       bool "AR5312 SoC GPIO support"
-       default y if SOC_AR5312
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_GPIO_ADNP)              += gpio-adnp.o
- obj-$(CONFIG_GPIO_ADP5520)    += gpio-adp5520.o
- obj-$(CONFIG_GPIO_ADP5588)    += gpio-adp5588.o
- obj-$(CONFIG_GPIO_AMD8111)    += gpio-amd8111.o
-+obj-$(CONFIG_GPIO_AR2315)     += gpio-ar2315.o
- obj-$(CONFIG_GPIO_AR5312)     += gpio-ar5312.o
- obj-$(CONFIG_GPIO_ARIZONA)    += gpio-arizona.o
- obj-$(CONFIG_GPIO_BCM_KONA)   += gpio-bcm-kona.o
---- /dev/null
-+++ b/drivers/gpio/gpio-ar2315.c
-@@ -0,0 +1,233 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/gpio.h>
-+#include <linux/irq.h>
-+
-+#define DRIVER_NAME   "ar2315-gpio"
-+
-+#define AR2315_GPIO_DI                        0x0000
-+#define AR2315_GPIO_DO                        0x0008
-+#define AR2315_GPIO_DIR                       0x0010
-+#define AR2315_GPIO_INT                       0x0018
-+
-+#define AR2315_GPIO_DIR_M(x)          (1 << (x))      /* mask for i/o */
-+#define AR2315_GPIO_DIR_O(x)          (1 << (x))      /* output */
-+#define AR2315_GPIO_DIR_I(x)          (0)             /* input */
-+
-+#define AR2315_GPIO_INT_NUM_M         0x3F            /* mask for GPIO num */
-+#define AR2315_GPIO_INT_TRIG(x)               ((x) << 6)      /* interrupt trigger */
-+#define AR2315_GPIO_INT_TRIG_M                (0x3 << 6)      /* mask for int trig */
-+
-+#define AR2315_GPIO_INT_TRIG_OFF      0       /* Triggerring off */
-+#define AR2315_GPIO_INT_TRIG_LOW      1       /* Low Level Triggered */
-+#define AR2315_GPIO_INT_TRIG_HIGH     2       /* High Level Triggered */
-+#define AR2315_GPIO_INT_TRIG_EDGE     3       /* Edge Triggered */
-+
-+#define AR2315_GPIO_NUM               22
-+
-+static u32 ar2315_gpio_intmask;
-+static u32 ar2315_gpio_intval;
-+static unsigned ar2315_gpio_irq_base;
-+static void __iomem *ar2315_mem;
-+
-+static inline u32 ar2315_gpio_reg_read(unsigned reg)
-+{
-+      return __raw_readl(ar2315_mem + reg);
-+}
-+
-+static inline void ar2315_gpio_reg_write(unsigned reg, u32 val)
-+{
-+      __raw_writel(val, ar2315_mem + reg);
-+}
-+
-+static inline void ar2315_gpio_reg_mask(unsigned reg, u32 mask, u32 val)
-+{
-+      ar2315_gpio_reg_write(reg, (ar2315_gpio_reg_read(reg) & ~mask) | val);
-+}
-+
-+static void ar2315_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-+{
-+      u32 pend;
-+      int bit = -1;
-+
-+      /* only do one gpio interrupt at a time */
-+      pend = ar2315_gpio_reg_read(AR2315_GPIO_DI);
-+      pend ^= ar2315_gpio_intval;
-+      pend &= ar2315_gpio_intmask;
-+
-+      if (pend) {
-+              bit = fls(pend) - 1;
-+              pend &= ~(1 << bit);
-+              ar2315_gpio_intval ^= (1 << bit);
-+      }
-+
-+      /* Enable interrupt with edge detection */
-+      if ((ar2315_gpio_reg_read(AR2315_GPIO_DIR) & AR2315_GPIO_DIR_M(bit)) !=
-+          AR2315_GPIO_DIR_I(bit))
-+              return;
-+
-+      if (bit >= 0)
-+              generic_handle_irq(ar2315_gpio_irq_base + bit);
-+}
-+
-+static void ar2315_gpio_int_setup(unsigned gpio, int trig)
-+{
-+      u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_INT);
-+
-+      reg &= ~(AR2315_GPIO_INT_NUM_M | AR2315_GPIO_INT_TRIG_M);
-+      reg |= gpio | AR2315_GPIO_INT_TRIG(trig);
-+      ar2315_gpio_reg_write(AR2315_GPIO_INT, reg);
-+}
-+
-+static void ar2315_gpio_irq_unmask(struct irq_data *d)
-+{
-+      unsigned gpio = d->irq - ar2315_gpio_irq_base;
-+      u32 dir = ar2315_gpio_reg_read(AR2315_GPIO_DIR);
-+
-+      /* Enable interrupt with edge detection */
-+      if ((dir & AR2315_GPIO_DIR_M(gpio)) != AR2315_GPIO_DIR_I(gpio))
-+              return;
-+
-+      ar2315_gpio_intmask |= (1 << gpio);
-+      ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_EDGE);
-+}
-+
-+static void ar2315_gpio_irq_mask(struct irq_data *d)
-+{
-+      unsigned gpio = d->irq - ar2315_gpio_irq_base;
-+
-+      /* Disable interrupt */
-+      ar2315_gpio_intmask &= ~(1 << gpio);
-+      ar2315_gpio_int_setup(gpio, AR2315_GPIO_INT_TRIG_OFF);
-+}
-+
-+static struct irq_chip ar2315_gpio_irq_chip = {
-+      .name           = DRIVER_NAME,
-+      .irq_unmask     = ar2315_gpio_irq_unmask,
-+      .irq_mask       = ar2315_gpio_irq_mask,
-+};
-+
-+static void ar2315_gpio_irq_init(unsigned irq)
-+{
-+      unsigned i;
-+
-+      ar2315_gpio_intval = ar2315_gpio_reg_read(AR2315_GPIO_DI);
-+      for (i = 0; i < AR2315_GPIO_NUM; i++) {
-+              unsigned _irq = ar2315_gpio_irq_base + i;
-+
-+              irq_set_chip_and_handler(_irq, &ar2315_gpio_irq_chip,
-+                                       handle_level_irq);
-+      }
-+      irq_set_chained_handler(irq, ar2315_gpio_irq_handler);
-+}
-+
-+static int ar2315_gpio_get_val(struct gpio_chip *chip, unsigned gpio)
-+{
-+      return (ar2315_gpio_reg_read(AR2315_GPIO_DI) >> gpio) & 1;
-+}
-+
-+static void ar2315_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val)
-+{
-+      u32 reg = ar2315_gpio_reg_read(AR2315_GPIO_DO);
-+
-+      reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio);
-+      ar2315_gpio_reg_write(AR2315_GPIO_DO, reg);
-+}
-+
-+static int ar2315_gpio_dir_in(struct gpio_chip *chip, unsigned gpio)
-+{
-+      ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 1 << gpio, 0);
-+      return 0;
-+}
-+
-+static int ar2315_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val)
-+{
-+      ar2315_gpio_reg_mask(AR2315_GPIO_DIR, 0, 1 << gpio);
-+      ar2315_gpio_set_val(chip, gpio, val);
-+      return 0;
-+}
-+
-+static int ar2315_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
-+{
-+      return ar2315_gpio_irq_base + gpio;
-+}
-+
-+static struct gpio_chip ar2315_gpio_chip = {
-+      .label                  = DRIVER_NAME,
-+      .direction_input        = ar2315_gpio_dir_in,
-+      .direction_output       = ar2315_gpio_dir_out,
-+      .set                    = ar2315_gpio_set_val,
-+      .get                    = ar2315_gpio_get_val,
-+      .to_irq                 = ar2315_gpio_to_irq,
-+      .base                   = 0,
-+      .ngpio                  = AR2315_GPIO_NUM,
-+};
-+
-+static int ar2315_gpio_probe(struct platform_device *pdev)
-+{
-+      struct device *dev = &pdev->dev;
-+      struct resource *res;
-+      unsigned irq;
-+      int ret;
-+
-+      if (ar2315_mem)
-+              return -EBUSY;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
-+                                         "ar2315-gpio-irq-base");
-+      if (!res) {
-+              dev_err(dev, "not found GPIO IRQ base\n");
-+              return -ENXIO;
-+      }
-+      ar2315_gpio_irq_base = res->start;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, DRIVER_NAME);
-+      if (!res) {
-+              dev_err(dev, "not found IRQ number\n");
-+              return -ENXIO;
-+      }
-+      irq = res->start;
-+
-+      res = platform_get_resource_byname(pdev, IORESOURCE_MEM, DRIVER_NAME);
-+      ar2315_mem = devm_ioremap_resource(dev, res);
-+      if (IS_ERR(ar2315_mem))
-+              return PTR_ERR(ar2315_mem);
-+
-+      ar2315_gpio_chip.dev = dev;
-+      ret = gpiochip_add(&ar2315_gpio_chip);
-+      if (ret) {
-+              dev_err(dev, "failed to add gpiochip\n");
-+              return ret;
-+      }
-+
-+      ar2315_gpio_irq_init(irq);
-+
-+      return 0;
-+}
-+
-+static struct platform_driver ar2315_gpio_driver = {
-+      .probe = ar2315_gpio_probe,
-+      .driver = {
-+              .name = DRIVER_NAME,
-+              .owner = THIS_MODULE,
-+      }
-+};
-+
-+static int __init ar2315_gpio_init(void)
-+{
-+      return platform_driver_register(&ar2315_gpio_driver);
-+}
-+subsys_initcall(ar2315_gpio_init);