bcm53xx: add support basic for kernel 4.3

[openwrt/svn-archive/archive.git] / target / linux / bcm53xx / patches-4.3 / 305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch

diff --git a/target/linux/bcm53xx/patches-4.3/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.3/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
new file mode 100644 (file)
index 0000000..82ac24e
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.3/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
@@ -0,0 +1,69 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] ARM: BCM5301X: Add DT for Linksys EA6300 V1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -63,6 +63,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+       bcm4708-asus-rt-ac56u.dtb \
+       bcm4708-asus-rt-ac68u.dtb \
+       bcm4708-buffalo-wzr-1750dhp.dtb \
++      bcm4708-linksys-ea6300-v1.dtb \
+       bcm4708-luxul-xwc-1000.dtb \
+       bcm4708-netgear-r6250.dtb \
+       bcm4708-netgear-r6300-v2.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -0,0 +1,48 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Linksys EA6300 V1
++ *
++ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++      compatible = "linksys,ea6300v1", "brcm,bcm4708";
++      model = "Linksys EA6300 V1";
++
++      chosen {
++              bootargs = "console=ttyS0,115200";
++      };
++
++      memory {
++              reg = <0x00000000 0x08000000>;
++      };
++
++      gpio-keys {
++              compatible = "gpio-keys";
++              #address-cells = <1>;
++              #size-cells = <0>;
++
++              wps {
++                      label = "WPS";
++                      linux,code = <KEY_WPS_BUTTON>;
++                      gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++              };
++
++              restart {
++                      label = "Reset";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++              };
++      };
++};
++
++&uart0 {
++      status = "okay";
++};