bcm53xx: backport BCM5301X earlycon and USB VCC patches

[openwrt/svn-archive/archive.git] / target / linux / bcm53xx / patches-4.4 / 130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch

diff --git a/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
deleted file mode 100644 (file)
index c606e93..0000000
--- a/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
+++ /dev/null
@@ -1,145 +0,0 @@
-From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 26 Jan 2016 23:35:16 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's device based on BCM47094 which is quite similar to BCM4709 except
-for higher CPU frequency. This device has 2 flash memories, it boots
-from serial one and stores firmware on NAND. Other than that we define
-standard stuff like LEDs, buttons and UART.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile                    |   1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 111 ++++++++++++++++++++++++++
- 2 files changed, 112 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
-       bcm4709-buffalo-wxr-1900dhp.dtb \
-       bcm4709-netgear-r7000.dtb \
-       bcm4709-netgear-r8000.dtb \
-+      bcm47094-dlink-dir-885l.dtb \
-       bcm94708.dtb \
-       bcm94709.dtb \
-       bcm953012k.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -0,0 +1,111 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for D-Link DIR-885L
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+      compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
-+      model = "D-Link DIR-885L";
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200";
-+      };
-+
-+      memory {
-+              reg = <0x00000000 0x08000000>;
-+      };
-+
-+      nand: nand@18028000 {
-+              nandcs@0 {
-+                      partition@0 {
-+                              label = "firmware";
-+                              reg = <0x00000000 0x08000000>;
-+                      };
-+              };
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+
-+              power-white {
-+                      label = "bcm53xx:white:power";
-+                      gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+                      linux,default-trigger = "default-on";
-+              };
-+
-+              wan-white {
-+                      label = "bcm53xx:white:wan";
-+                      gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+                      linux,default-trigger = "default-off";
-+              };
-+
-+              power-amber {
-+                      label = "bcm53xx:amber:power";
-+                      gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+                      linux,default-trigger = "default-off";
-+              };
-+
-+              wan-amber {
-+                      label = "bcm53xx:amber:wan";
-+                      gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+                      linux,default-trigger = "default-off";
-+              };
-+
-+              usb3-white {
-+                      label = "bcm53xx:white:usb3";
-+                      gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+                      linux,default-trigger = "default-off";
-+              };
-+
-+              2ghz {
-+                      label = "bcm53xx:white:2ghz";
-+                      gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+                      linux,default-trigger = "default-off";
-+              };
-+
-+              5ghz {
-+                      label = "bcm53xx:white:5ghz";
-+                      gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+                      linux,default-trigger = "default-off";
-+              };
-+      };
-+
-+      gpio-keys {
-+              compatible = "gpio-keys";
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+
-+              wps {
-+                      label = "WPS";
-+                      linux,code = <KEY_WPS_BUTTON>;
-+                      gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+              };
-+
-+              /* Switch: router / extender */
-+              extender {
-+                      label = "Extender";
-+                      linux,code = <BTN_0>;
-+                      gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+              };
-+
-+              restart {
-+                      label = "Reset";
-+                      linux,code = <KEY_RESTART>;
-+                      gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+              };
-+      };
-+};
-+
-+&uart0 {
-+      status = "okay";
-+      clock-frequency = <125000000>;
-+};