get rid of per-profile base-files

[openwrt/svn-archive/archive.git] / target / linux / brcm-2.4 / base-files / default / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
deleted file mode 100755 (executable)
index 643ba35..0000000
--- a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
+++ /dev/null
@@ -1,154 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
-
-START=05
-
-start() {
-       [ -e /etc/config/network ] && exit 0
-
-       mkdir -p /etc/config
-
-       (
-               if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
-                       # WGT634u
-                       echo boardtype=wgt634u
-               else
-                       strings "$(find_mtd_part nvram)"
-               fi
-       ) | awk '
-       function p(cfgname, name) {
-               if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
-       }
-
-       function macinc(mac, maca, i, result) {
-               split(mac, maca, ":")
-               for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
-               if (++maca[6] > 0xff) {
-                       maca[5]++
-                       maca[6] = 0
-               }
-               for (i = 1; i <= 6; i++) {
-                       if (i != 1) result = result ":"
-                       result = result sprintf("%02x", maca[i])
-               }
-               return result
-       }
-
-       BEGIN {
-               FS="="
-               c["lan_ifname"]="eth0.0"
-               c["wan_ifname"]="eth0.1"
-               c["vlan0ports"]="1 2 3 4 5*"
-               c["vlan1ports"]="0 5"
-               getline < "/proc/diag/model"
-               model=$0
-               for (i = 0; i < 6; i++) {
-                       if (mac_check != "") mac_check = mac_check ":"
-                       mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
-               }
-       }
-
-       ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
-               nvram[$1] = $2
-       }
-
-       END {
-               if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
-                       c["wan_ifname"] = ""
-                       c["lan_ifname"] = "eth1"
-               }
-               if (model == "ASUS WL-500g") {
-                       c["wan_ifname"] = "eth1"
-                       c["lan_ifname"] = "eth0"
-               }
-               if (model == "Dell TrueMobile 2300") {
-                       c["vlan0ports"] = "0 1 2 3 5*"
-                       c["vlan1ports"] = "4 5"
-               }
-               if (nvram["boardtype"] == "bcm94710r4") {
-                       # Toshiba WRC-1000
-                       c["lan_ifname"] = "eth0"
-                       c["wan_ifname"] = "eth1"
-               }
-               if (nvram["boardtype"] == "wgt634u") {
-                       c["vlan0ports"] = "0 1 2 3 5*"
-                       c["vlan1ports"] = "4 5"
-               }
-               if (nvram["boardtype"] == "0x0467") {
-                       c["vlan0ports"] = "0 1 2 3 5*"
-                       c["vlan1ports"] = "4 5"
-               }
-               if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
-                       if (nvram["boardnum"] == "45") {
-                               # WL-500gP
-                               c["vlan0ports"] = "1 2 3 4 5*"
-                               c["vlan1ports"] = "0 5"
-                       } else {
-                               # Generic BCM94704
-                               c["vlan0ports"] = "0 1 2 3 4 5u"
-                               c["vlan1ports"] = ""
-                               c["lan_ifname"] = "eth0"
-                               c["wan_ifname"] = "eth1"
-
-                               # MAC addresses on 4704 tend to be screwed up. Add a workaround here
-                               if (nvram["et0macaddr"] ~ mac_check) {
-                                       c["lan_macaddr"] = nvram["et0macaddr"]
-                                       c["wan_macaddr"] = macinc(c["lan_macaddr"])
-                               }
-                       }
-               }
-
-               # WAP54G
-               if ((nvram["boardnum"] == "2") || \
-                       (nvram["boardnum"] == "1024")) {
-                       c["lan_ifname"]="eth0"
-                       c["wan_ifname"]=""
-               }
-
-               # ASUS WL-700gE
-               # These are actually same as defaults above. For some reason this script applies
-               # Generic BCM94704 settings instead so we revert to proper settings here.
-               # Hopefully someone will fix this properly soon.
-               if (model == "ASUS WL-700gE") {
-                       c["lan_ifname"]="eth0.0"
-                       c["wan_ifname"]="eth0.1"
-                       c["vlan0ports"]="1 2 3 4 5*"
-                       c["vlan1ports"]="0 5"
-               }
-
-               if (model == "Motorola WR850G V2/V3") {
-                       c["vlan0ports"]="0 1 2 3 5*"
-                       c["vlan1ports"]="4 5"
-               }
-
-               print "#### VLAN configuration "
-               print "config switch eth0"
-               p("vlan0", "vlan0ports")
-               p("vlan1", "vlan1ports")
-               print ""
-               print ""
-               print "#### Loopback configuration"
-               print "config interface loopback"
-               print " option ifname   \"lo\""
-               print " option proto    static"
-               print " option ipaddr   127.0.0.1"
-               print " option netmask  255.0.0.0"
-               print ""
-               print ""
-               print "#### LAN configuration"
-               print "config interface lan"
-               print " option type     bridge"
-               p("ifname", "lan_ifname")
-               p("macaddr", "lan_macaddr")
-               print " option proto    static"
-               print " option ipaddr   192.168.1.1"
-               print " option netmask  255.255.255.0"
-               print ""
-               print ""
-               print "#### WAN configuration"
-               print "config interface wan"
-               p("ifname", "wan_ifname")
-               p("macaddr", "wan_macaddr")
-               print " option proto    dhcp"
-       }' > /etc/config/network
-}