commit profile support for base-files... patches still need to be done

[openwrt/svn-archive/archive.git] / target / linux / brcm-2.4 / base-files / default / etc / init.d / netconfig

diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
new file mode 100755 (executable)
index 0000000..4cc23d2
--- /dev/null
+++ b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
@@ -0,0 +1,145 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=05
+
+start() {
+       [ -e /etc/config/network ] && exit 0
+
+       mkdir -p /etc/config
+
+       (
+               if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+                       # WGT634u
+                       echo boardtype=wgt634u
+               else
+                       strings /dev/mtdblock/3
+               fi
+       ) | awk '
+       function p(cfgname, name) {
+               if (c[name] != "") print "      option " cfgname "      \"" c[name] "\""
+       }
+
+       function macinc(mac, maca, i, result) {
+               split(mac, maca, ":")
+               for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
+               if (++maca[6] > 0xff) {
+                       maca[5]++
+                       maca[6] = 0
+               }
+               for (i = 1; i <= 6; i++) {
+                       if (i != 1) result = result ":"
+                       result = result sprintf("%02x", maca[i])
+               }
+               return result
+       }
+
+       BEGIN {
+               FS="="
+               c["lan_ifname"]="eth0.0"
+               c["wan_ifname"]="eth0.1"
+               c["vlan0ports"]="1 2 3 4 5*"
+               c["vlan1ports"]="0 5"
+               getline < "/proc/diag/model"
+               model=$0
+               for (i = 0; i < 6; i++) {
+                       if (mac_check != "") mac_check = mac_check ":"
+                       mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
+               }
+       }
+       
+       ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
+               nvram[$1] = $2
+       }
+       
+       END {
+               if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
+                       c["wan_ifname"] = ""
+                       c["lan_ifname"] = "eth1"
+               }
+               if (model == "ASUS WL-500g") {
+                       c["wan_ifname"] = "eth1"
+                       c["lan_ifname"] = "eth0"
+               }
+               if (nvram["boardtype"] == "bcm94710r4") {
+                       # Toshiba WRC-1000
+                       c["lan_ifname"] = "eth0"
+                       c["wan_ifname"] = "eth1"
+               }
+               if (nvram["boardtype"] == "wgt634u") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"
+               }
+               if (nvram["boardtype"] == "0x0467") {
+                       c["vlan0ports"] = "0 1 2 3 5*"
+                       c["vlan1ports"] = "4 5"
+               }
+               if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
+                       if (nvram["boardnum"] == "45") {
+                               # WL-500gP
+                               c["vlan0ports"] = "1 2 3 4 5*"
+                               c["vlan1ports"] = "0 5"
+                       } else {
+                               # Generic BCM94704
+                               c["vlan0ports"] = "0 1 2 3 4 5u"
+                               c["vlan1ports"] = ""
+                               c["lan_ifname"] = "eth0"
+                               c["wan_ifname"] = "eth1"
+
+                               # MAC addresses on 4704 tend to be screwed up. Add a workaround here
+                               if (nvram["et0macaddr"] ~ mac_check) {
+                                       c["lan_macaddr"] = nvram["et0macaddr"]
+                                       c["wan_macaddr"] = macinc(c["lan_macaddr"])
+                               }
+                       }
+               }
+
+               # WAP54G
+               if ((nvram["boardnum"] == "2") || \
+                       (nvram["boardnum"] == "1024")) {
+                       c["lan_ifname"]="eth0"
+                       c["wan_ifname"]=""
+               }
+       
+               # ASUS WL-700gE
+               # These are actually same as defaults above. For some reason this script applies
+               # Generic BCM94704 settings instead so we revert to proper settings here.       
+               # Hopefully someone will fix this properly soon.
+               if (model == "ASUS WL-700gE") {
+                       c["lan_ifname"]="eth0.0"
+                       c["wan_ifname"]="eth0.1"
+                       c["vlan0ports"]="1 2 3 4 5*"
+                       c["vlan1ports"]="0 5"
+               }
+               
+               print "#### VLAN configuration "
+               print "config switch eth0"
+               p("vlan0", "vlan0ports")
+               p("vlan1", "vlan1ports")
+               print ""
+               print ""
+               print "#### Loopback configuration"
+               print "config interface loopback"
+               print " option ifname   \"lo\""
+               print " option proto    static"
+               print " option ipaddr   127.0.0.1"
+               print " option netmask  255.0.0.0"
+               print ""
+               print ""
+               print "#### LAN configuration"
+               print "config interface lan"
+               print " option type     bridge"
+               p("ifname", "lan_ifname")
+               p("macaddr", "lan_macaddr")
+               print " option proto    static"
+               print " option ipaddr   192.168.1.1"
+               print " option netmask  255.255.255.0"
+               print ""
+               print ""
+               print "#### WAN configuration"
+               print "config interface wan"
+               p("ifname", "wan_ifname")
+               p("macaddr", "wan_macaddr")
+               print " option proto    dhcp"
+       }' > /etc/config/network
+}