brcm63xx: drop 3.18 support
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.18 / 422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
diff --git a/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.18/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644 (file)
index 4a0a7b0..0000000
+++ /dev/null
@@ -1,206 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
-                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--                 pci-ath9k-fixup.o usb-common.o sprom.o
-+                 pci-ath9k-fixup.o pci-rt2x00-fixup.o usb-common.o sprom.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_common.c
-+++ b/arch/mips/bcm63xx/boards/board_common.c
-@@ -37,6 +37,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- #include "board_common.h"
-@@ -299,9 +300,19 @@ int __init board_register_devices(void)
-       }
-       /* register any fixups */
--      for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check, board.caldata[i].led_pin);
-+      for (i = 0; i < board.has_caldata; i++) {
-+              switch (board.caldata[i].vendor) {
-+              case PCI_VENDOR_ID_ATHEROS:
-+                      pci_enable_ath9k_fixup(board.caldata[i].slot,
-+                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+                              board.caldata[i].led_pin);
-+                      break;
-+              case PCI_VENDOR_ID_RALINK:
-+                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+                              board.caldata[i].eeprom);
-+                      break;
-+              }
-+      }
-       return 0;
- }
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -215,7 +215,7 @@ void __init bcm63xx_flash_detect(void)
-       }
- }
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
- {
-       u32 val;
-       unsigned int i;
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+      {
-+              .slot = 255,
-+      },
-+      {
-+              .slot = 255,
-+      },
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+      unsigned i;
-+      struct rt2x00_platform_data *pdata = NULL;
-+
-+      for (i = 0; i < rt2x00_num_fixups; i++) {
-+              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              pdata = &rt2x00_fixups[i].pdata;
-+              break;
-+      }
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+      rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -13,7 +13,7 @@ void bcm63xx_flash_detect(void);
- void bcm63xx_flash_force_phys_base_address(u32 start, u32 end);
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
- int bcm63xx_flash_get_type(void);
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -11,6 +11,7 @@
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_fallback_sprom.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- /*
-  * flash mapping
-@@ -18,11 +19,15 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+      unsigned int    vendor;
-       unsigned int    slot;
-       u32             caldata_offset;
-+      /* Atheros */
-       unsigned int    endian_check:1;
-       int             led_pin;
-+      /* Ralink */
-+      char*           eeprom;
- };
- /*
-@@ -48,7 +53,7 @@ struct board_info {
-       unsigned int    has_caldata:2;
-       /* wifi calibration data config */
--      struct ath9k_caldata caldata[2];
-+      struct bcm63xx_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+