bcm63xx: reorder patches
[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.3 / 501-board-NB4.patch
diff --git a/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch
new file mode 100644 (file)
index 0000000..d70d00b
--- /dev/null
@@ -0,0 +1,563 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -17,6 +17,9 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_buttons.h>
+ #include <linux/input.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++#include <linux/spi/74x164.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -38,6 +41,12 @@
+ #define CFE_OFFSET_64K                0x10000
+ #define CFE_OFFSET_128K               0x20000
++#define NB4_PID_OFFSET                0xff80
++#define NB4_74X164_GPIO_BASE  64
++#define NB4_SPI_GPIO_MOSI     7
++#define NB4_SPI_GPIO_CLK      6
++#define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
++
+ static struct bcm963xx_nvram nvram;
+ static unsigned int mac_addr_used;
+ static struct board_info board;
+@@ -664,6 +673,496 @@ static struct board_info __initdata boar
+       .has_ohci0                      = 1,
+ };
++
++struct spi_gpio_platform_data nb4_spi_gpio_data = {
++      .sck            = NB4_SPI_GPIO_CLK,
++      .mosi           = NB4_SPI_GPIO_MOSI,
++      .miso           = SPI_GPIO_NO_MISO,
++      .num_chipselect = 1,
++};
++
++
++static struct platform_device nb4_spi_gpio = {
++      .name = "spi_gpio",
++      .id   = 1,
++      .dev = {
++              .platform_data = &nb4_spi_gpio_data,
++      },
++};
++
++static struct platform_device * __initdata nb4_devices[] = {
++      &nb4_spi_gpio,
++};
++
++const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
++      .base = NB4_74X164_GPIO_BASE
++};
++
++static struct spi_board_info nb4_spi_devices[] = {
++      {
++              .modalias = "74x164",
++              .max_speed_hz = 781000,
++              .bus_num = 1,
++              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++              .mode = SPI_MODE_0,
++              .platform_data = &nb4_74x164_platform_data
++      }
++};
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++      .name                           = "NB4-SER-r0",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r1 = {
++      .name                           = "NB4-SER-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r2 = {
++      .name                           = "NB4-SER-r2",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++                      .active_low     = 1,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++      .name                           = "NB4-FXC-r1",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r2 = {
++      .name                           = "NB4-FXC-r2",
++      .expected_cpu_id                = 0x6358,
++
++      .has_uart0                      = 1,
++      .has_enet0                      = 1,
++      .has_enet1                      = 1,
++      .has_pci                        = 1,
++
++      .enet0 = {
++              .has_phy                = 1,
++              .use_internal_phy       = 1,
++      },
++
++      .enet1 = {
++              .force_speed_100        = 1,
++              .force_duplex_full      = 1,
++      },
++
++
++      .has_ohci0 = 1,
++      .has_pccard = 1,
++      .has_ehci0 = 1,
++
++      .leds = {
++              {
++                      .name           = "adsl",
++                      .gpio           = NB4_74HC64_GPIO(4),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "traffic",
++                      .gpio           = 2,
++              },
++              {
++                      .name           = "tel",
++                      .gpio           = NB4_74HC64_GPIO(3),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "tv",
++                      .gpio           = NB4_74HC64_GPIO(2),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "wifi",
++                      .gpio           = 15,
++              },
++              {
++                      .name           = "alarm",
++                      .gpio           = NB4_74HC64_GPIO(0),
++                      .active_low     = 1,
++              },
++              {
++                      .name           = "service:red",
++                      .gpio           = 29,
++              },
++              {
++                      .name           = "service:green",
++                      .gpio           = 30,
++              },
++              {
++                      .name           = "service:blue",
++                      .gpio           = 4,
++              },
++      },
++      .buttons = {
++              {
++                      .desc           = "reset",
++                      .gpio           = 34,
++                      .type           = EV_KEY,
++                      .code           = KEY_RESTART,
++                      .threshold      = 3,
++              },
++              {
++                      .desc           = "wps",
++                      .gpio           = 37,
++                      .type           = EV_KEY,
++                      .code           = KEY_WPS_BUTTON,
++                      .threshold      = 3,
++              },
++      },
++      .devs = nb4_devices,
++      .num_devs = ARRAY_SIZE(nb4_devices),
++      .spis = nb4_spi_devices,
++      .num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
+ #endif
+ /*
+@@ -694,9 +1193,30 @@ static const struct board_info __initdat
+       &board_96358vw2,
+       &board_AGPFS0,
+       &board_DWVS0,
++      &board_nb4_ser_r0,
++      &board_nb4_ser_r1,
++      &board_nb4_ser_r2,
++      &board_nb4_fxc_r1,
++      &board_nb4_fxc_r2,
+ #endif
+ };
++static void __init nb4_nvram_fixup(void)
++{
++      u8 *boot_addr, *p;
++      u32 val;
++
++      if (BCMCPU_IS_6358() && (!strcmp(nvram.name, "96358VW"))) {
++              val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++              val &= MPI_CSBASE_BASE_MASK;
++              boot_addr = (u8 *)KSEG1ADDR(val);
++              /* Extract nb4 PID */
++              p = boot_addr + NB4_PID_OFFSET;
++              if (!memcmp(p, "NB4-", 4))
++                      memcpy(nvram.name, p, sizeof("NB4-XXX-rX"));
++      }
++}
++
+ /*
+  * Register a sane SPROMv2 to make the on-board
+  * bcm4318 WLAN work
+@@ -847,6 +1367,9 @@ void __init board_prom_init(void)
+               boardid_fixup(boot_addr);
+       }
++      /* Fixup broken nb4 board name */
++      nb4_nvram_fixup();
++
+       /* find board by name */
+       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
+               if (strncmp(nvram.name, bcm963xx_boards[i]->name,