[brcm63xx] remove support for 3.6 kernel

[openwrt/svn-archive/archive.git] / target / linux / brcm63xx / patches-3.6 / 527-board_dva-g3810bn-tl-1.patch

diff --git a/target/linux/brcm63xx/patches-3.6/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.6/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644 (file)
index 202de74..0000000
--- a/target/linux/brcm63xx/patches-3.6/527-board_dva-g3810bn-tl-1.patch
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2553,6 +2553,73 @@ static struct board_info __initdata boar
-               },
-       }
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+      .name                   = "DVAG3810BN",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_uart0              = 1,
-+      .has_enet0              = 1,
-+      .has_enet1              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 0,
-+              .use_internal_phy       = 1,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0              = 1,
-+      .has_pccard             = 1,
-+      .has_ehci0              = 1,
-+
-+      .leds = {
-+              {
-+                      .name   = "DVAG3810BN::voip",
-+                      .gpio   = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::dsl",
-+                      .gpio   = 22,
-+                      .active_low  = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::internet",
-+                      .gpio   = 23,
-+                      .active_low  = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::power",
-+                      .gpio   = 4,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name   = "DVAG3810BN::stop",
-+                      .gpio   = 5,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc   = "reset",
-+                      .gpio   = 34,
-+                      .active_low = 1,
-+                      .type   = EV_KEY,
-+                      .code   = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- 
- /*
-@@ -2748,6 +2815,7 @@ static const struct board_info __initdat
-       &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
-+      &board_DVAG3810BN,
- #endif
- 
- #ifdef CONFIG_BCM63XX_CPU_6368