move etrax generic files to specific kernel version

[openwrt/svn-archive/archive.git] / target / linux / etrax / files / arch / cris / arch-v10 / drivers / etraxi2c.h

diff --git a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h b/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
deleted file mode 100644 (file)
index 4235086..0000000
--- a/target/linux/etrax/files/arch/cris/arch-v10/drivers/etraxi2c.h
+++ /dev/null
@@ -1,49 +0,0 @@
-#ifndef _LINUX_ETRAXI2C_H\r
-#define _LINUX_ETRAXI2C_H\r
-\r
-/* etraxi2c _IOC_TYPE, bits 8 to 15 in ioctl cmd */\r
-\r
-#define ETRAXI2C_IOCTYPE 44\r
-\r
-/* supported ioctl _IOC_NR's */\r
-\r
-/* in write operations, the argument contains both i2c\r
- * slave, register and value.\r
- */\r
-\r
-#define I2C_WRITEARG(slave, reg, value) (((slave) << 16) | ((reg) << 8) | (value))\r
-#define I2C_READARG(slave, reg) (((slave) << 16) | ((reg) << 8))\r
-\r
-#define I2C_ARGSLAVE(arg) ((arg) >> 16)\r
-#define I2C_ARGREG(arg) (((arg) >> 8) & 0xff)\r
-#define I2C_ARGVALUE(arg) ((arg) & 0xff)\r
-\r
-#define I2C_WRITEREG    0x1   /* write to an I2C register */\r
-#define I2C_READREG     0x2   /* read from an I2C register */\r
-\r
-/*\r
-EXAMPLE usage:\r
-\r
-    i2c_arg = I2C_WRITEARG(STA013_WRITE_ADDR, reg, val);\r
-    ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_WRITEREG), i2c_arg);\r
-\r
-    i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);\r
-    val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);\r
-\r
-*/\r
-\r
-/* Extended part */\r
-#define I2C_READ        0x4     /* reads from I2C device */\r
-#define I2C_WRITE       0x3     /* writes to I2C device */\r
-#define I2C_WRITEREAD   0x5        /* writes to I2C device where to start reading */\r
-\r
-typedef struct _I2C_DATA \r
-{\r
-    unsigned char slave;        /* I2C address (8-bit representation) of slave device */\r
-    unsigned char wbuf[256];    /* Write buffer (length = 256 bytes) */\r
-       unsigned int  wlen;         /* Number of bytes to write from wbuf[] */   \r
-       unsigned char rbuf[256];    /* Read buffer (length = 256 bytes) */\r
-    unsigned int  rlen;         /* Number of bytes to read into rbuf[] */\r
-} I2C_DATA;\r
-\r
-#endif\r