+++ /dev/null
-/*******************************************************************************
-Copyright (C) Marvell International Ltd. and its affiliates
-
-This software file (the "File") is owned and distributed by Marvell
-International Ltd. and/or its affiliates ("Marvell") under the following
-alternative licensing terms. Once you have made an election to distribute the
-File under one of the following license alternatives, please (i) delete this
-introductory statement regarding license alternatives, (ii) delete the two
-license alternatives that you have not elected to use and (iii) preserve the
-Marvell copyright notice above.
-
-********************************************************************************
-Marvell Commercial License Option
-
-If you received this File from Marvell and you have entered into a commercial
-license agreement (a "Commercial License") with Marvell, the File is licensed
-to you under the terms of the applicable Commercial License.
-
-********************************************************************************
-Marvell GPL License Option
-
-If you received this File from Marvell, you may opt to use, redistribute and/or
-modify this File in accordance with the terms and conditions of the General
-Public License Version 2, June 1991 (the "GPL License"), a copy of which is
-available along with the File in the license.txt file or by writing to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
-on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
-
-THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
-WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
-DISCLAIMED. The GPL License provides additional details about this warranty
-disclaimer.
-********************************************************************************
-Marvell BSD License Option
-
-If you received this File from Marvell, you may opt to use, redistribute and/or
-modify this File under the following licensing terms.
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- * Neither the name of Marvell nor the names of its contributors may be
- used to endorse or promote products derived from this software without
- specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*******************************************************************************/
-
-
-#ifndef __INCPCIH
-#define __INCPCIH
-
-#include "mvCommon.h"
-#include "mvOs.h"
-#include "ctrlEnv/mvCtrlEnvSpec.h"
-#include "pci/mvPciRegs.h"
-
-
-/* NOTE not supported in this driver:
-
- Built In Self Test (BIST)
- Vital Product Data (VPD)
- Message Signaled Interrupt (MSI)
- Power Management
- Compact PCI Hot Swap
- Header retarget
-
-Registers not supported:
-1) PCI DLL Status and Control (PCI0 0x1D20, PCI1 0x1DA0)
-2) PCI/MPP Pads Calibration (CI0/MPP[31:16] 0x1D1C, PCI1/MPP[15:0] 0X1D9C)
-*/
-
-/* defines */
-/* The number of supported PCI interfaces depend on Marvell controller */
-/* device number. This device number ID is located on the PCI unit */
-/* configuration header. This creates a loop where calling PCI */
-/* configuration read/write routine results a call to get PCI configuration */
-/* information etc. This macro defines a default PCI interface. This PCI */
-/* interface is sure to exist. */
-#define PCI_DEFAULT_IF 0
-
-
-/* typedefs */
-/* The Marvell controller supports both conventional PCI and PCI-X. */
-/* This enumeration describes the PCI type. */
-typedef enum _mvPciType
-{
- MV_PCI_CONV, /* Conventional PCI */
- MV_PCIX /* PCI-X */
-}MV_PCI_TYPE;
-
-typedef enum _mvPciMod
-{
- MV_PCI_MOD_HOST,
- MV_PCI_MOD_DEVICE
-}MV_PCI_MOD;
-
-
-/* The Marvell controller supports both PCI width of 32 and 64 bit. */
-/* This enumerator describes PCI width */
-typedef enum _mvPciWidth
-{
- MV_PCI_32, /* PCI width 32bit */
- MV_PCI_64 /* PCI width 64bit */
-}MV_PCI_WIDTH;
-
-/* This structure describes the PCI unit configured type, speed and width. */
-typedef struct _mvPciMode
-{
- MV_PCI_TYPE pciType; /* PCI type */
- MV_U32 pciSpeed; /* Assuming PCI base clock on board is 33MHz */
- MV_PCI_WIDTH pciWidth; /* PCI bus width */
-}MV_PCI_MODE;
-
-/* mvPciInit - Initialize PCI interfaces*/
-MV_VOID mvPciHalInit(MV_U32 pciIf, MV_PCI_MOD pciIfmod);
-
-/* mvPciCommandSet - Set PCI comman register value.*/
-MV_STATUS mvPciCommandSet(MV_U32 pciIf, MV_U32 command);
-
-/* mvPciModeGet - Get PCI interface mode.*/
-MV_STATUS mvPciModeGet(MV_U32 pciIf, MV_PCI_MODE *pPciMode);
-
-/* mvPciRetrySet - Set PCI retry counters*/
-MV_STATUS mvPciRetrySet(MV_U32 pciIf, MV_U32 counter);
-
-/* mvPciDiscardTimerSet - Set PCI discard timer*/
-MV_STATUS mvPciDiscardTimerSet(MV_U32 pciIf, MV_U32 pClkCycles);
-
-/* mvPciArbEnable - PCI arbiter enable/disable*/
-MV_STATUS mvPciArbEnable(MV_U32 pciIf, MV_BOOL enable);
-
-/* mvPciArbParkDis - Disable arbiter parking on agent */
-MV_STATUS mvPciArbParkDis(MV_U32 pciIf, MV_U32 pciAgentMask);
-
-/* mvPciArbBrokDetectSet - Set PCI arbiter broken detection */
-MV_STATUS mvPciArbBrokDetectSet(MV_U32 pciIf, MV_U32 pClkCycles);
-
-/* mvPciConfigRead - Read from configuration space */
-MV_U32 mvPciConfigRead (MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
- MV_U32 func,MV_U32 regOff);
-
-/* mvPciConfigWrite - Write to configuration space */
-MV_STATUS mvPciConfigWrite(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,
- MV_U32 func, MV_U32 regOff, MV_U32 data);
-
-/* mvPciMasterEnable - Enable/disale PCI interface master transactions.*/
-MV_STATUS mvPciMasterEnable(MV_U32 pciIf, MV_BOOL enable);
-
-/* mvPciSlaveEnable - Enable/disale PCI interface slave transactions.*/
-MV_STATUS mvPciSlaveEnable(MV_U32 pciIf, MV_U32 bus, MV_U32 dev,MV_BOOL enable);
-
-/* mvPciLocalBusNumSet - Set PCI interface local bus number.*/
-MV_STATUS mvPciLocalBusNumSet(MV_U32 pciIf, MV_U32 busNum);
-
-/* mvPciLocalBusNumGet - Get PCI interface local bus number.*/
-MV_U32 mvPciLocalBusNumGet(MV_U32 pciIf);
-
-/* mvPciLocalDevNumSet - Set PCI interface local device number.*/
-MV_STATUS mvPciLocalDevNumSet(MV_U32 pciIf, MV_U32 devNum);
-
-/* mvPciLocalDevNumGet - Get PCI interface local device number.*/
-MV_U32 mvPciLocalDevNumGet(MV_U32 pciIf);
-
-
-#endif /* #ifndef __INCPCIH */
-
-
-
projects / openwrt / svn-archive / archive.git / blobdiff