rename target/linux/generic-2.6 to generic

[openwrt/svn-archive/archive.git] / target / linux / generic / image / lzma-loader / src / uart16550.c

diff --git a/target/linux/generic/image/lzma-loader/src/uart16550.c b/target/linux/generic/image/lzma-loader/src/uart16550.c
new file mode 100644 (file)
index 0000000..7df5727
--- /dev/null
+++ b/target/linux/generic/image/lzma-loader/src/uart16550.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+
+#include "uart16550.h"
+
+/* === CONFIG === */
+
+#define         BASE                    0xb8058000
+#define         MAX_BAUD                1152000
+#define         REG_OFFSET              4
+
+/* === END OF CONFIG === */
+
+/* register offset */
+#define         OFS_RCV_BUFFER          (0*REG_OFFSET)
+#define         OFS_TRANS_HOLD          (0*REG_OFFSET)
+#define         OFS_SEND_BUFFER         (0*REG_OFFSET)
+#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
+#define         OFS_INTR_ID             (2*REG_OFFSET)
+#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
+#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
+#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
+#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
+#define         OFS_LINE_STATUS         (5*REG_OFFSET)
+#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
+#define         OFS_RS232_INPUT         (6*REG_OFFSET)
+#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
+
+#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
+#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define         UART16550_READ(y)    (*((volatile uint32*)(BASE + y)))
+#define         UART16550_WRITE(y, z)  ((*((volatile uint32*)(BASE + y))) = z)
+
+#define DEBUG_LED (*(unsigned short*)0xb7ffffc0)
+#define OutputLED(x)  (DEBUG_LED = x)
+
+void Uart16550Init(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+    /* disable interrupts */
+    UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+    /* set up buad rate */
+    { 
+        uint32 divisor;
+       
+        /* set DIAB bit */
+        UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+        
+        /* set divisor */
+        divisor = MAX_BAUD / baud;
+        UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+        UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8);
+
+        /* clear DIAB bit */
+        UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+    }
+
+    /* set data format */
+    UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+uint8 Uart16550GetPoll()
+{
+    while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+    return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+void Uart16550Put(uint8 byte)
+{
+    while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0);
+    UART16550_WRITE(OFS_SEND_BUFFER, byte);
+}
+