#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_regs.h>
#include <linux/ssb/ssb_driver_gige.h>
-@@ -383,6 +384,35 @@ static int ssb_device_uevent(struct devi
+@@ -139,19 +140,6 @@ static void ssb_device_put(struct ssb_de
+ put_device(dev->dev);
+ }
+
+-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
+-{
+- if (drv)
+- get_driver(&drv->drv);
+- return drv;
+-}
+-
+-static inline void ssb_driver_put(struct ssb_driver *drv)
+-{
+- if (drv)
+- put_driver(&drv->drv);
+-}
+-
+ static int ssb_device_resume(struct device *dev)
+ {
+ struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+@@ -249,11 +237,9 @@ int ssb_devices_freeze(struct ssb_bus *b
+ ssb_device_put(sdev);
+ continue;
+ }
+- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
+- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
+- ssb_device_put(sdev);
++ sdrv = drv_to_ssb_drv(sdev->dev->driver);
++ if (SSB_WARN_ON(!sdrv->remove))
+ continue;
+- }
+ sdrv->remove(sdev);
+ ctx->device_frozen[i] = 1;
+ }
+@@ -292,7 +278,6 @@ int ssb_devices_thaw(struct ssb_freeze_c
+ dev_name(sdev->dev));
+ result = err;
+ }
+- ssb_driver_put(sdrv);
+ ssb_device_put(sdev);
+ }
+
+@@ -383,6 +368,35 @@ static int ssb_device_uevent(struct devi
ssb_dev->id.revision);
}
static struct bus_type ssb_bustype = {
.name = "ssb",
.match = ssb_bus_match,
-@@ -392,6 +422,7 @@ static struct bus_type ssb_bustype = {
+@@ -392,6 +406,7 @@ static struct bus_type ssb_bustype = {
.suspend = ssb_device_suspend,
.resume = ssb_device_resume,
.uevent = ssb_device_uevent,
};
static void ssb_buses_lock(void)
-@@ -527,7 +558,7 @@ error:
+@@ -527,7 +542,7 @@ error:
}
/* Needs ssb_buses_lock() */
{
struct ssb_bus *bus, *n;
int err = 0;
-@@ -738,9 +769,9 @@ out:
+@@ -738,9 +753,9 @@ out:
return err;
}
{
int err;
-@@ -821,8 +852,8 @@ err_disable_xtal:
+@@ -821,8 +836,8 @@ err_disable_xtal:
}
#ifdef CONFIG_SSB_PCIHOST
{
int err;
-@@ -845,9 +876,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
+@@ -845,9 +860,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
#endif /* CONFIG_SSB_PCIHOST */
#ifdef CONFIG_SSB_PCMCIAHOST
{
int err;
-@@ -867,8 +898,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
+@@ -867,8 +882,9 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register
#endif /* CONFIG_SSB_PCMCIAHOST */
#ifdef CONFIG_SSB_SDIOHOST
{
int err;
-@@ -888,9 +920,9 @@ int ssb_bus_sdiobus_register(struct ssb_
+@@ -888,9 +904,9 @@ int ssb_bus_sdiobus_register(struct ssb_
EXPORT_SYMBOL(ssb_bus_sdiobus_register);
#endif /* CONFIG_SSB_PCMCIAHOST */
{
int err;
-@@ -971,8 +1003,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
+@@ -971,8 +987,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
switch (plltype) {
case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
if (m & SSB_CHIPCO_CLK_T6_MMASK)
case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
-@@ -1087,23 +1119,22 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -1062,6 +1078,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+ u32 plltype;
+ u32 clkctl_n, clkctl_m;
+
++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++ return ssb_pmu_get_controlclock(&bus->chipco);
++
+ if (ssb_extif_available(&bus->extif))
+ ssb_extif_get_clockcontrol(&bus->extif, &plltype,
+ &clkctl_n, &clkctl_m);
+@@ -1087,23 +1106,22 @@ static u32 ssb_tmslow_reject_bitmask(str
{
u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
}
int ssb_device_is_enabled(struct ssb_device *dev)
-@@ -1162,10 +1193,10 @@ void ssb_device_enable(struct ssb_device
+@@ -1162,10 +1180,10 @@ void ssb_device_enable(struct ssb_device
}
EXPORT_SYMBOL(ssb_device_enable);
{
int i;
u32 val;
-@@ -1173,7 +1204,7 @@ static int ssb_wait_bit(struct ssb_devic
+@@ -1173,7 +1191,7 @@ static int ssb_wait_bit(struct ssb_devic
for (i = 0; i < timeout; i++) {
val = ssb_read32(dev, reg);
if (set) {
return 0;
} else {
if (!(val & bitmask))
-@@ -1190,20 +1221,38 @@ static int ssb_wait_bit(struct ssb_devic
+@@ -1190,20 +1208,38 @@ static int ssb_wait_bit(struct ssb_devic
void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
{
ssb_write32(dev, SSB_TMSLOW,
reject | SSB_TMSLOW_RESET |
-@@ -1212,13 +1261,34 @@ void ssb_device_disable(struct ssb_devic
+@@ -1212,13 +1248,34 @@ void ssb_device_disable(struct ssb_devic
}
EXPORT_SYMBOL(ssb_device_disable);
default:
__ssb_dma_not_implemented(dev);
}
-@@ -1261,20 +1331,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1261,20 +1318,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
{
return 0;
error:
ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
-@@ -1282,6 +1352,37 @@ error:
+@@ -1282,6 +1339,37 @@ error:
}
EXPORT_SYMBOL(ssb_bus_powerup);
* Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
-@@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss
- out->antenna_gain.ghz5.a3 = gain;
- }
-
+@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss
+ {
+ int i;
+ u16 v;
+- s8 gain;
+ u16 loc[3];
+
+ if (out->revision == 3) /* rev 3 moved MAC */
+@@ -390,20 +389,52 @@ static void sprom_extract_r123(struct ss
+ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
+
+ /* Extract the antenna gain values. */
+- gain = r123_extract_antgain(out->revision, in,
+- SSB_SPROM1_AGAIN_BG,
+- SSB_SPROM1_AGAIN_BG_SHIFT);
+- out->antenna_gain.ghz24.a0 = gain;
+- out->antenna_gain.ghz24.a1 = gain;
+- out->antenna_gain.ghz24.a2 = gain;
+- out->antenna_gain.ghz24.a3 = gain;
+- gain = r123_extract_antgain(out->revision, in,
+- SSB_SPROM1_AGAIN_A,
+- SSB_SPROM1_AGAIN_A_SHIFT);
+- out->antenna_gain.ghz5.a0 = gain;
+- out->antenna_gain.ghz5.a1 = gain;
+- out->antenna_gain.ghz5.a2 = gain;
+- out->antenna_gain.ghz5.a3 = gain;
++ out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
++ SSB_SPROM1_AGAIN_BG,
++ SSB_SPROM1_AGAIN_BG_SHIFT);
++ out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
++ SSB_SPROM1_AGAIN_A,
++ SSB_SPROM1_AGAIN_A_SHIFT);
++}
++
+/* Revs 4 5 and 8 have partially shared layout */
+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
+{
+ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
+ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
+ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
+ }
+
static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
- {
- int i;
-@@ -428,10 +468,14 @@ static void sprom_extract_r45(struct ssb
+@@ -428,10 +459,14 @@ static void sprom_extract_r45(struct ssb
SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
}
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
+@@ -460,16 +495,16 @@ static void sprom_extract_r45(struct ssb
+ }
-+ sprom_extract_r458(out, in);
+ /* Extract the antenna gain values. */
+- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
++ SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
+ SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
+- SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
++ SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
+ SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
+- SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
++ SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
+ SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
+- SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
++ SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
+ SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
+- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+- sizeof(out->antenna_gain.ghz5));
+
++ sprom_extract_r458(out, in);
+
/* TODO - get remaining rev 4 stuff needed */
}
-
+@@ -477,7 +512,13 @@ static void sprom_extract_r45(struct ssb
static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
{
int i;
/* extract the MAC address */
for (i = 0; i < 3; i++) {
-@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- sizeof(out->antenna_gain.ghz5));
-
+@@ -550,16 +591,71 @@ static void sprom_extract_r8(struct ssb_
+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
+
+ /* Extract the antenna gain values. */
+- SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
+ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
+- SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
+ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
+- SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
+ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
+- SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
+ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
+- memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+- sizeof(out->antenna_gain.ghz5));
++
+ /* Extract cores power info info */
+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+ o = pwr_info_offset[i];
+ SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
+
+ sprom_extract_r458(out, in);
-+
+
/* TODO - get remaining rev 8 stuff needed */
}
-
-@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus
+@@ -573,37 +669,34 @@ static int sprom_extract(struct ssb_bus
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
memset(out->et1mac, 0xFF, 6);
}
if (out->boardflags_lo == 0xFFFF)
-@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus
+@@ -617,15 +710,14 @@ static int sprom_extract(struct ssb_bus
static int ssb_pci_sprom_get(struct ssb_bus *bus,
struct ssb_sprom *sprom)
{
/*
* get SPROM offset: SSB_SPROM_BASE1 except for
* chipcommon rev >= 31 or chip ID is 0x4312 and
-@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -645,7 +737,7 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
if (!buf)
bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
sprom_do_read(bus, buf);
err = sprom_check_crc(buf, bus->sprom_size);
-@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -655,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
GFP_KERNEL);
if (!buf)
err = 0;
goto out_free;
}
-@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -677,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_
out_free:
kfree(buf);
bus->chip_package = 0;
} else {
bus->chip_id = 0x4710;
-@@ -405,10 +407,10 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -316,6 +318,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ bus->chip_package = 0;
+ }
+ }
++ ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
++ "package 0x%02X\n", bus->chip_id, bus->chip_rev,
++ bus->chip_package);
+ if (!bus->nr_devices)
+ bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+@@ -405,10 +410,10 @@ int ssb_bus_scan(struct ssb_bus *bus,
/* Ignore PCI cores on PCI-E cards.
* Ignore PCI-E cores on PCI cards. */
if (dev->id.coreid == SSB_DEV_PCI) {
continue;
}
}
-@@ -420,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -420,6 +425,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
bus->pcicore.dev = dev;
#endif /* CONFIG_SSB_DRIVER_PCICORE */
break;
+struct ssb_sprom_core_pwr_info {
+ u8 itssi_2g, itssi_5g;
+ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
-+ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++ u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
+};
+
struct ssb_sprom {
u8 revision;
u8 il0mac[6]; /* MAC address for 802.11b/g */
-@@ -25,8 +31,10 @@ struct ssb_sprom {
+@@ -25,8 +31,13 @@ struct ssb_sprom {
u8 et1phyaddr; /* MII address for enet1 */
u8 et0mdcport; /* MDIO for enet0 */
u8 et1mdcport; /* MDIO for enet1 */
- u8 board_rev; /* Board revision number from SPROM. */
+ u16 board_rev; /* Board revision number from SPROM. */
++ u16 board_num; /* Board number from SPROM. */
++ u16 board_type; /* Board type from SPROM. */
u8 country_code; /* Country Code */
-+ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */
-+ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
++ char alpha2[2]; /* Country Code as two chars like EU or US */
++ u8 leddc_on_time; /* LED Powersave Duty Cycle On Count */
++ u8 leddc_off_time; /* LED Powersave Duty Cycle Off Count */
u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
u16 pa0b0;
-@@ -55,6 +63,10 @@ struct ssb_sprom {
+@@ -45,18 +56,22 @@ struct ssb_sprom {
+ u8 gpio1; /* GPIO pin 1 */
+ u8 gpio2; /* GPIO pin 2 */
+ u8 gpio3; /* GPIO pin 3 */
+- u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
+- u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++ u8 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
+ u8 itssi_a; /* Idle TSSI Target for A-PHY */
+ u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
+ u8 tri2g; /* 2.4GHz TX isolation */
u8 tri5gl; /* 5.2GHz TX isolation */
u8 tri5g; /* 5.3GHz TX isolation */
u8 tri5gh; /* 5.8GHz TX isolation */
+- u8 rxpo2g; /* 2GHz RX power offset */
+- u8 rxpo5g; /* 5GHz RX power offset */
+ u8 txpid2g[4]; /* 2GHz TX power index */
+ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */
+ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */
+ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */
- u8 rxpo2g; /* 2GHz RX power offset */
- u8 rxpo5g; /* 5GHz RX power offset */
++ s8 rxpo2g; /* 2GHz RX power offset */
++ s8 rxpo5g; /* 5GHz RX power offset */
u8 rssisav2g; /* 2GHz RSSI params */
-@@ -76,6 +88,8 @@ struct ssb_sprom {
+ u8 rssismc2g;
+ u8 rssismf2g;
+@@ -76,26 +91,104 @@ struct ssb_sprom {
u16 boardflags2_hi; /* Board flags (bits 48-63) */
/* TODO store board flags in a single u64 */
/* Antenna gain values for up to 4 antennas
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
* loss in the connectors is bigger than the gain. */
-@@ -88,6 +102,15 @@ struct ssb_sprom {
- } ghz5; /* 5GHz band */
+ struct {
+- struct {
+- s8 a0, a1, a2, a3;
+- } ghz24; /* 2.4GHz band */
+- struct {
+- s8 a0, a1, a2, a3;
+- } ghz5; /* 5GHz band */
++ s8 a0, a1, a2, a3;
} antenna_gain;
+- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
+ struct {
+ struct {
+ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut;
+ } ghz5;
+ } fem;
+
- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
++ u16 mcs2gpo[8];
++ u16 mcs5gpo[8];
++ u16 mcs5glpo[8];
++ u16 mcs5ghpo[8];
++ u8 opo;
++
++ u8 rxgainerr2ga[3];
++ u8 rxgainerr5gla[3];
++ u8 rxgainerr5gma[3];
++ u8 rxgainerr5gha[3];
++ u8 rxgainerr5gua[3];
++
++ u8 noiselvl2ga[3];
++ u8 noiselvl5gla[3];
++ u8 noiselvl5gma[3];
++ u8 noiselvl5gha[3];
++ u8 noiselvl5gua[3];
++
++ u8 regrev;
++ u8 txchain;
++ u8 rxchain;
++ u8 antswitch;
++ u16 cddpo;
++ u16 stbcpo;
++ u16 bw40po;
++ u16 bwduppo;
++
++ u8 tempthresh;
++ u8 tempoffset;
++ u16 rawtempsense;
++ u8 measpower;
++ u8 tempsense_slope;
++ u8 tempcorrx;
++ u8 tempsense_option;
++ u8 freqoffset_corr;
++ u8 iqcal_swp_dis;
++ u8 hw_iqcal_en;
++ u8 elna2g;
++ u8 elna5g;
++ u8 phycal_tempdelta;
++ u8 temps_period;
++ u8 temps_hysteresis;
++ u8 measpower1;
++ u8 measpower2;
++ u8 pcieingress_war;
++
++ /* power per rate from sromrev 9 */
++ u16 cckbw202gpo;
++ u16 cckbw20ul2gpo;
++ u32 legofdmbw202gpo;
++ u32 legofdmbw20ul2gpo;
++ u32 legofdmbw205glpo;
++ u32 legofdmbw20ul5glpo;
++ u32 legofdmbw205gmpo;
++ u32 legofdmbw20ul5gmpo;
++ u32 legofdmbw205ghpo;
++ u32 legofdmbw20ul5ghpo;
++ u32 mcsbw202gpo;
++ u32 mcsbw20ul2gpo;
++ u32 mcsbw402gpo;
++ u32 mcsbw205glpo;
++ u32 mcsbw20ul5glpo;
++ u32 mcsbw405glpo;
++ u32 mcsbw205gmpo;
++ u32 mcsbw20ul5gmpo;
++ u32 mcsbw405gmpo;
++ u32 mcsbw205ghpo;
++ u32 mcsbw20ul5ghpo;
++ u32 mcsbw405ghpo;
++ u16 mcs32po;
++ u16 legofdm40duppo;
++ u8 sar2g;
++ u8 sar5g;
};
-@@ -95,7 +118,7 @@ struct ssb_sprom {
+ /* Information about the PCB the circuitry is soldered on. */
struct ssb_boardinfo {
u16 vendor;
u16 type;
};
-@@ -225,10 +248,9 @@ struct ssb_driver {
+@@ -225,10 +318,9 @@ struct ssb_driver {
#define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
extern void ssb_driver_unregister(struct ssb_driver *drv);
-@@ -304,7 +326,7 @@ struct ssb_bus {
+@@ -304,7 +396,7 @@ struct ssb_bus {
/* ID information about the Chip. */
u16 chip_id;
u16 sprom_offset;
u16 sprom_size; /* number of words in sprom */
u8 chip_package;
-@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc
+@@ -400,7 +492,9 @@ extern bool ssb_is_sprom_available(struc
/* Set a fallback SPROM.
* See kdoc at the function definition for complete documentation. */
/* Suspend a SSB bus.
* Call this from the parent bus suspend routine. */
-@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -514,6 +608,7 @@ extern int ssb_bus_may_powerdown(struct
* Otherwise static always-on powercontrol will be used. */
extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
* Copyright 2007, Broadcom Corporation
*
* Licensed under the GNU/GPL. See COPYING for details.
-@@ -417,12 +417,14 @@ static void ssb_pmu_resources_init(struc
+@@ -12,6 +12,9 @@
+ #include <linux/ssb/ssb_regs.h>
+ #include <linux/ssb/ssb_driver_chipcommon.h>
+ #include <linux/delay.h>
++#ifdef CONFIG_BCM47XX
++#include <asm/mach-bcm47xx/nvram.h>
++#endif
+
+ #include "ssb_private.h"
+
+@@ -91,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s
+ u32 pmuctl, tmp, pllctl;
+ unsigned int i;
+
+- if ((bus->chip_id == 0x5354) && !crystalfreq) {
+- /* The 5354 crystal freq is 25MHz */
+- crystalfreq = 25000;
+- }
+ if (crystalfreq)
+ e = pmu0_plltab_find_entry(crystalfreq);
+ if (!e)
+@@ -320,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_
+ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
+
+ if (bus->bustype == SSB_BUSTYPE_SSB) {
+- /* TODO: The user may override the crystal frequency. */
++#ifdef CONFIG_BCM47XX
++ char buf[20];
++ if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
++ crystalfreq = simple_strtoul(buf, NULL, 0);
++#endif
+ }
+
+ switch (bus->chip_id) {
+@@ -329,7 +332,11 @@ static void ssb_pmu_pll_init(struct ssb_
+ ssb_pmu1_pllinit_r0(cc, crystalfreq);
+ break;
+ case 0x4328:
++ ssb_pmu0_pllinit_r0(cc, crystalfreq);
++ break;
+ case 0x5354:
++ if (crystalfreq == 0)
++ crystalfreq = 25000;
+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
+ break;
+ case 0x4322:
+@@ -417,12 +424,14 @@ static void ssb_pmu_resources_init(struc
u32 min_msk = 0, max_msk = 0;
unsigned int i;
const struct pmu_res_updown_tab_entry *updown_tab = NULL;
case 0x4322:
/* We keep the default settings:
* min_msk = 0xCBB
+@@ -604,3 +613,34 @@ void ssb_pmu_set_ldo_paref(struct ssb_ch
+
+ EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
+ EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
++
++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++
++ switch (bus->chip_id) {
++ case 0x5354:
++ /* 5354 chip uses a non programmable PLL of frequency 240MHz */
++ return 240000000;
++ default:
++ ssb_printk(KERN_ERR PFX
++ "ERROR: PMU cpu clock unknown for device %04X\n",
++ bus->chip_id);
++ return 0;
++ }
++}
++
++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
++{
++ struct ssb_bus *bus = cc->dev->bus;
++
++ switch (bus->chip_id) {
++ case 0x5354:
++ return 120000000;
++ default:
++ ssb_printk(KERN_ERR PFX
++ "ERROR: PMU controlclock unknown for device %04X\n",
++ bus->chip_id);
++ return 0;
++ }
++}
--- a/drivers/ssb/driver_gige.c
+++ b/drivers/ssb/driver_gige.c
@@ -3,7 +3,7 @@
static inline
u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
+@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_
+ u32 tmp;
+
+ /* We do only have one cardbus device behind the bridge. */
+- if (pc->cardbusmode && (dev >= 1))
++ if (pc->cardbusmode && (dev > 1))
+ goto out;
+
+ if (bus == 0) {
@@ -309,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st
return ssb_mips_irq(extpci_core->dev) + 2;
}
/* core.c */
+@@ -206,4 +207,8 @@ static inline void b43_pci_ssb_bridge_ex
+ }
+ #endif /* CONFIG_SSB_B43_PCI_BRIDGE */
+
++/* driver_chipcommon_pmu.c */
++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
++
+ #endif /* LINUX_SSB_PRIVATE_H_ */
--- a/include/linux/ssb/ssb_driver_chipcommon.h
+++ b/include/linux/ssb/ssb_driver_chipcommon.h
@@ -8,7 +8,7 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
+@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+ struct ssb_bus *bus = mcore->dev->bus;
+ u32 pll_type, n, m, rate = 0;
+
++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++ return ssb_pmu_get_cpu_clock(&bus->chipco);
++
+ if (bus->extif.dev) {
+ ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
+ } else if (bus->chipco.dev) {
--- a/drivers/ssb/embedded.c
+++ b/drivers/ssb/embedded.c
@@ -3,7 +3,7 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*/
+@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants(
+ case SSB_PCMCIA_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->TupleDataLen != 2,
+ "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
+- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++ sprom->antenna_gain.a0 = tuple->TupleData[1];
++ sprom->antenna_gain.a1 = tuple->TupleData[1];
++ sprom->antenna_gain.a2 = tuple->TupleData[1];
++ sprom->antenna_gain.a3 = tuple->TupleData[1];
+ break;
+ case SSB_PCMCIA_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
--- a/drivers/ssb/sdio.c
+++ b/drivers/ssb/sdio.c
@@ -6,7 +6,7 @@
*
* Licensed under the GNU/GPL. See COPYING for details.
*
+@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b
+ case SSB_SDIO_CIS_ANTGAIN:
+ GOTO_ERROR_ON(tuple->size != 2,
+ "antg tpl size");
+- sprom->antenna_gain.ghz24.a0 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a1 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a2 = tuple->data[1];
+- sprom->antenna_gain.ghz24.a3 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a0 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a1 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a2 = tuple->data[1];
+- sprom->antenna_gain.ghz5.a3 = tuple->data[1];
++ sprom->antenna_gain.a0 = tuple->data[1];
++ sprom->antenna_gain.a1 = tuple->data[1];
++ sprom->antenna_gain.a2 = tuple->data[1];
++ sprom->antenna_gain.a3 = tuple->data[1];
+ break;
+ case SSB_SDIO_CIS_BFLAGS:
+ GOTO_ERROR_ON((tuple->size != 3) &&
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -2,6 +2,7 @@
+ #define LINUX_SSB_DRIVER_GIGE_H_
+
+ #include <linux/ssb/ssb.h>
++#include <linux/bug.h>
+ #include <linux/pci.h>
+ #include <linux/spinlock.h>
+
projects / openwrt / svn-archive / archive.git / blobdiff