more danube 2 ifxmips transitions

[openwrt/svn-archive/archive.git] / target / linux / ifxmips / files / include / asm-mips / danube / ifx_peripheral_definitions.h

diff --git a/target/linux/ifxmips/files/include/asm-mips/danube/ifx_peripheral_definitions.h b/target/linux/ifxmips/files/include/asm-mips/danube/ifx_peripheral_definitions.h
deleted file mode 100644 (file)
index 5bd788f..0000000
--- a/target/linux/ifxmips/files/include/asm-mips/danube/ifx_peripheral_definitions.h
+++ /dev/null
@@ -1,119 +0,0 @@
-//*************************************************************************
-//* Summary of definitions which are used in each peripheral              *
-//*************************************************************************
-
-#ifndef peripheral_definitions_h
-#define peripheral_definitions_h
-
-////#include "cpu.h"
-//
-///* These files have to be included by each peripheral */
-//#include <sysdefs.h>
-//#include <excep.h>
-//#include <cpusubsys.h>
-//#include <sys_api.h>
-//#include <mips.h>
-//#include "SRAM_address_map.h"
-//
-///* common header files for all CPU's */
-//#include "iiu.h"
-//#include "bcu.h"
-//#include "FPI_address_map.h"
-//#include "direct_interrupts.h"
-
-/////////////////////////////////////////////////////////////////////////
-
-//extern  int _clz();
-//extern void _nop();
-//extern void _sleep();
-//extern void sys_enable_int();
-
-typedef unsigned char UINT8;
-typedef signed char INT8;
-typedef unsigned short UINT16;
-typedef signed short INT16;
-typedef unsigned int UINT32;
-typedef signed int INT32;
-typedef unsigned long long UINT64;
-typedef signed long long INT64;
-
-#define REG8( addr )             (*(volatile UINT8 *) (addr))
-#define REG16( addr )            (*(volatile UINT16 *)(addr))
-#define REG32( addr )            (*(volatile UINT32 *)(addr))
-#define REG64( addr )            (*(volatile UINT64 *)(addr))
-
-/* define routine to set FPI access in Supervisor Mode */
-#define IFX_SUPERVISOR_ON()                         REG32(FB0_CFG) = 0x01
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_OFF()                        REG32(FB0_CFG) = 0x00
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_MODE()                       REG32(FB0_CFG)
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_SET(svm)                     REG32(FB0_CFG) = svm
-/* enable all Interrupts in IIU */
-//#define IFX_ENABLE_IRQ(irq_mask, im_base)           REG32(im_base | IIU_MASK) = irq_mask
-///* get all high priority interrupt bits in IIU */
-//#define IFX_GET_IRQ_MASKED(im_base)                 REG32(im_base | IIU_IRMASKED)
-///* signal ends of interrupt to IIU */
-//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base)      REG32(im_base | IIU_IR) = irq_bit
-///* force IIU interrupt register */
-//#define IFX_FORCE_IIU_REGISTER(data, im_base)       REG32(im_base | IIU_IRDEBUG) = data
-///* get all bits of interrupt register */
-//#define IFX_GET_IRQ_UNMASKED(im_base)               REG32(im_base | IIU_IR)
-/* insert a NOP instruction */
-#define NOP                                     _nop()
-/* CPU goes to power down mode until interrupt occurs */
-#define IFX_CPU_SLEEP                               _sleep()
-/* enable all interrupts to CPU */
-#define IFX_CPU_ENABLE_ALL_INTERRUPT                sys_enable_int()
-/* get all low priority interrupt bits in peripheral */
-#define IFX_GET_LOW_PRIO_IRQ(int_reg)               REG32(int_reg)
-/* clear low priority interrupt bit in peripheral */
-#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg)    REG32(int_reg) = irq_bit
-/* write FPI bus */
-#define WRITE_FPI_BYTE(data, addr)              REG8(addr) = data
-#define WRITE_FPI_16BIT(data, addr)             REG16(addr) = data
-#define WRITE_FPI_32BIT(data, addr)             REG32(addr) = data
-/* read FPI bus */
-#define READ_FPI_BYTE(addr)                     REG8(addr)
-#define READ_FPI_16BIT(addr)                    REG16(addr)
-#define READ_FPI_32BIT(addr)                    REG32(addr)
-/* write peripheral register */
-#define WRITE_PERIPHERAL_REGISTER(data, addr)   REG32(addr) = data
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-/* read peripheral register */
-#define READ_PERIPHERAL_REGISTER(addr)          REG32(addr)
-
-/* read/modify(or)/write peripheral register */
-#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
-/* read/modify(and)/write peripheral register */
-#define RMW_AND_PERIPHERAL_REGISTER(data, addr)        REG32(addr) = REG32(addr) & (UINT32)data
-
-/* CPU-independent mnemonic constants */
-/* CLC register bits */
-#define IFX_CLC_ENABLE                0x00000000
-#define IFX_CLC_DISABLE               0x00000001
-#define IFX_CLC_DISABLE_STATUS        0x00000002
-#define IFX_CLC_SUSPEND_ENABLE        0x00000004
-#define IFX_CLC_CLOCK_OFF_DISABLE     0x00000008
-#define IFX_CLC_OVERWRITE_SPEN_FSOE   0x00000010
-#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
-#define IFX_CLC_RUN_DIVIDER_MASK      0x0000FF00
-#define IFX_CLC_RUN_DIVIDER_OFFSET    8
-#define IFX_CLC_SLEEP_DIVIDER_MASK    0x00FF0000
-#define IFX_CLC_SLEEP_DIVIDER_OFFSET  16
-#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
-
-/* number of cycles to wait for interrupt service routine to be called */
-#define WAIT_CYCLES   50
-
-#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */