+++ /dev/null
-From 07d7d95706c1bf373bd6b30c42f95c7b8dc8b9ce Mon Sep 17 00:00:00 2001
-From: Kumar Gala <galak@codeaurora.org>
-Date: Thu, 3 Apr 2014 14:48:22 -0500
-Subject: [PATCH 094/182] ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410
- board device trees
-
-Add basic APQ8064 SoC include device tree and support for basic booting on
-the IFC6410 board. Also, keep dtb build list and qcom_dt_match in sorted
-order.
-
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
----
- arch/arm/boot/dts/Makefile | 8 +-
- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 16 +++
- arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi | 1 +
- arch/arm/boot/dts/qcom-apq8064.dtsi | 170 ++++++++++++++++++++++++++++
- arch/arm/mach-qcom/board.c | 3 +-
- 5 files changed, 194 insertions(+), 4 deletions(-)
- create mode 100644 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
- create mode 100644 arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
- create mode 100644 arch/arm/boot/dts/qcom-apq8064.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -231,9 +231,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420
- dra7-evm.dtb
- dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
- dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
--dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
-- qcom-msm8960-cdp.dtb \
-- qcom-apq8074-dragonboard.dtb
-+dtb-$(CONFIG_ARCH_QCOM) += \
-+ qcom-apq8064-ifc6410.dtb \
-+ qcom-apq8074-dragonboard.dtb \
-+ qcom-msm8660-surf.dtb \
-+ qcom-msm8960-cdp.dtb
- dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
- ste-hrefprev60-stuib.dtb \
- ste-hrefprev60-tvk.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
-@@ -0,0 +1,16 @@
-+#include "qcom-apq8064-v2.0.dtsi"
-+
-+/ {
-+ model = "Qualcomm APQ8064/IFC6410";
-+ compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
-+
-+ soc {
-+ gsbi@16600000 {
-+ status = "ok";
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ serial@16640000 {
-+ status = "ok";
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
-@@ -0,0 +1 @@
-+#include "qcom-apq8064.dtsi"
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
-@@ -0,0 +1,170 @@
-+/dts-v1/;
-+
-+#include "skeleton.dtsi"
-+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
-+#include <dt-bindings/soc/qcom,gsbi.h>
-+
-+/ {
-+ model = "Qualcomm APQ8064";
-+ compatible = "qcom,apq8064";
-+ interrupt-parent = <&intc>;
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu@0 {
-+ compatible = "qcom,krait";
-+ enable-method = "qcom,kpss-acc-v1";
-+ device_type = "cpu";
-+ reg = <0>;
-+ next-level-cache = <&L2>;
-+ qcom,acc = <&acc0>;
-+ qcom,saw = <&saw0>;
-+ };
-+
-+ cpu@1 {
-+ compatible = "qcom,krait";
-+ enable-method = "qcom,kpss-acc-v1";
-+ device_type = "cpu";
-+ reg = <1>;
-+ next-level-cache = <&L2>;
-+ qcom,acc = <&acc1>;
-+ qcom,saw = <&saw1>;
-+ };
-+
-+ cpu@2 {
-+ compatible = "qcom,krait";
-+ enable-method = "qcom,kpss-acc-v1";
-+ device_type = "cpu";
-+ reg = <2>;
-+ next-level-cache = <&L2>;
-+ qcom,acc = <&acc2>;
-+ qcom,saw = <&saw2>;
-+ };
-+
-+ cpu@3 {
-+ compatible = "qcom,krait";
-+ enable-method = "qcom,kpss-acc-v1";
-+ device_type = "cpu";
-+ reg = <3>;
-+ next-level-cache = <&L2>;
-+ qcom,acc = <&acc3>;
-+ qcom,saw = <&saw3>;
-+ };
-+
-+ L2: l2-cache {
-+ compatible = "cache";
-+ cache-level = <2>;
-+ };
-+ };
-+
-+ cpu-pmu {
-+ compatible = "qcom,krait-pmu";
-+ interrupts = <1 10 0x304>;
-+ };
-+
-+ soc: soc {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ compatible = "simple-bus";
-+
-+ intc: interrupt-controller@2000000 {
-+ compatible = "qcom,msm-qgic2";
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+ reg = <0x02000000 0x1000>,
-+ <0x02002000 0x1000>;
-+ };
-+
-+ timer@200a000 {
-+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
-+ interrupts = <1 1 0x301>,
-+ <1 2 0x301>,
-+ <1 3 0x301>;
-+ reg = <0x0200a000 0x100>;
-+ clock-frequency = <27000000>,
-+ <32768>;
-+ cpu-offset = <0x80000>;
-+ };
-+
-+ acc0: clock-controller@2088000 {
-+ compatible = "qcom,kpss-acc-v1";
-+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-+ };
-+
-+ acc1: clock-controller@2098000 {
-+ compatible = "qcom,kpss-acc-v1";
-+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-+ };
-+
-+ acc2: clock-controller@20a8000 {
-+ compatible = "qcom,kpss-acc-v1";
-+ reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
-+ };
-+
-+ acc3: clock-controller@20b8000 {
-+ compatible = "qcom,kpss-acc-v1";
-+ reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
-+ };
-+
-+ saw0: regulator@2089000 {
-+ compatible = "qcom,saw2";
-+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-+ regulator;
-+ };
-+
-+ saw1: regulator@2099000 {
-+ compatible = "qcom,saw2";
-+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-+ regulator;
-+ };
-+
-+ saw2: regulator@20a9000 {
-+ compatible = "qcom,saw2";
-+ reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
-+ regulator;
-+ };
-+
-+ saw3: regulator@20b9000 {
-+ compatible = "qcom,saw2";
-+ reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
-+ regulator;
-+ };
-+
-+ gsbi7: gsbi@16600000 {
-+ status = "disabled";
-+ compatible = "qcom,gsbi-v1.0.0";
-+ reg = <0x16600000 0x100>;
-+ clocks = <&gcc GSBI7_H_CLK>;
-+ clock-names = "iface";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ serial@16640000 {
-+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-+ reg = <0x16640000 0x1000>,
-+ <0x16600000 0x1000>;
-+ interrupts = <0 158 0x0>;
-+ clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-+ clock-names = "core", "iface";
-+ status = "disabled";
-+ };
-+ };
-+
-+ qcom,ssbi@500000 {
-+ compatible = "qcom,ssbi";
-+ reg = <0x00500000 0x1000>;
-+ qcom,controller-type = "pmic-arbiter";
-+ };
-+
-+ gcc: clock-controller@900000 {
-+ compatible = "qcom,gcc-apq8064";
-+ reg = <0x00900000 0x4000>;
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ };
-+ };
-+};
---- a/arch/arm/mach-qcom/board.c
-+++ b/arch/arm/mach-qcom/board.c
-@@ -15,9 +15,10 @@
- #include <asm/mach/arch.h>
-
- static const char * const qcom_dt_match[] __initconst = {
-+ "qcom,apq8064",
-+ "qcom,apq8074-dragonboard",
- "qcom,msm8660-surf",
- "qcom,msm8960-cdp",
-- "qcom,apq8074-dragonboard",
- NULL
- };
-
projects / openwrt / svn-archive / archive.git / blobdiff