kirkwood: prepare for 3.10

[openwrt/svn-archive/archive.git] / target / linux / kirkwood / files / arch / arm / mach-kirkwood / iconnect-setup.c

diff --git a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c b/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
deleted file mode 100644 (file)
index 4e8d192..0000000
--- a/target/linux/kirkwood/files/arch/arm/mach-kirkwood/iconnect-setup.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/iconnect-setup.c
- *
- * Iomega iConnect Wireless
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition iconnect_nand_parts[] = {
-       {
-               .name = "u-boot",
-               .offset = 0,
-               .size = SZ_1M
-       }, {
-               .name = "uImage",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size = SZ_1M + SZ_2M
-       }, {
-               .name = "rootfs",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size = SZ_32M,
-       }, {
-               .name = "data",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size = MTDPART_SIZ_FULL
-       },
-};
-
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-       .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
-};
-
-static struct gpio_led iconnect_led_pins[] = {
-       {
-               .name                   = "iconnect:blue:power",
-               .default_trigger        = "default-on",
-               .gpio                   = 42,
-       },
-       {
-               .name                   = "iconnect:red:power",
-               .gpio                   = 43,
-       },
-       {
-               .name                   = "iconnect:blue:usb1",
-               .gpio                   = 44,
-       },
-       {
-               .name                   = "iconnect:blue:usb2",
-               .gpio                   = 45,
-       },
-       {
-               .name                   = "iconnect:blue:usb3",
-               .gpio                   = 46,
-       },
-       {
-               .name                   = "iconnect:blue:usb4",
-               .gpio                   = 47,
-       },
-       {
-               .name                   = "iconnect:blue:otb",
-               .gpio                   = 48,
-       },
-};
-
-static struct gpio_led_platform_data iconnect_led_data = {
-       .leds           = iconnect_led_pins,
-       .num_leds       = ARRAY_SIZE(iconnect_led_pins),
-};
-
-static struct platform_device iconnect_leds = {
-       .name   = "leds-gpio",
-       .id     = -1,
-       .dev    = {
-               .platform_data  = &iconnect_led_data,
-       }
-};
-
-#define ICONNECT_GPIO_KEY_RESET                12
-#define ICONNECT_GPIO_KEY_OTB          35
-
-#define ICONNECT_SW_RESET              0x00
-#define ICONNECT_SW_OTB                        0x01
-
-static struct gpio_keys_button iconnect_buttons[] = {
-       {
-               .type           = EV_SW,
-               .code           = ICONNECT_SW_RESET,
-               .gpio           = ICONNECT_GPIO_KEY_RESET,
-               .desc           = "Reset Button",
-               .active_low     = 1,
-               .debounce_interval = 100,
-       },
-       {
-               .type           = EV_SW,
-               .code           = ICONNECT_SW_OTB,
-               .gpio           = ICONNECT_GPIO_KEY_OTB,
-               .desc           = "OTB Button",
-               .active_low     = 1,
-               .debounce_interval = 100,
-       },
-};
-
-static struct gpio_keys_platform_data iconnect_button_data = {
-       .buttons        = iconnect_buttons,
-       .nbuttons       = ARRAY_SIZE(iconnect_buttons),
-};
-
-static struct platform_device iconnect_button_device = {
-       .name           = "gpio-keys",
-       .id             = -1,
-       .num_resources  = 0,
-       .dev = {
-               .platform_data = &iconnect_button_data,
-       },
-};
-
-static unsigned int iconnect_mpp_config[] __initdata = {
-       MPP12_GPIO, /*Input for reset button*/
-       MPP35_GPIO, /*Input for OTB button*/
-       MPP42_GPIO,
-       MPP43_GPIO,
-       MPP44_GPIO,
-       MPP45_GPIO,
-       MPP46_GPIO,
-       MPP47_GPIO,
-       MPP48_GPIO,
-       0
-};
-
-static void __init iconnect_init(void)
-{
-       u32 dev, rev;
-
-       /*
-        * Basic setup. Needs to be called early.
-        */
-       kirkwood_init();
-       kirkwood_mpp_conf(iconnect_mpp_config);
-
-       kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
-       kirkwood_ehci_init();
-
-       kirkwood_ge00_init(&iconnect_ge00_data);
-       kirkwood_pcie_id(&dev, &rev);
-
-       kirkwood_uart0_init();
-       kirkwood_i2c_init();
-
-       platform_device_register(&iconnect_leds);
-       platform_device_register(&iconnect_button_device);
-}
-
-static int __init iconnect_pci_init(void)
-{
-       if (machine_is_iconnect())
-               kirkwood_pcie_init(KW_PCIE0);
-
-       return 0;
-}
-subsys_initcall(iconnect_pci_init);
-
-
-MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
-       .atag_offset    = 0x100,
-       .init_machine   = iconnect_init,
-       .map_io         = kirkwood_map_io,
-       .init_early     = kirkwood_init_early,
-       .init_irq       = kirkwood_init_irq,
-       .timer          = &kirkwood_timer,
-       .restart        = kirkwood_restart,
-MACHINE_END