+++ /dev/null
---- a/arch/mips/lantiq/machtypes.h
-+++ b/arch/mips/lantiq/machtypes.h
-@@ -20,6 +20,42 @@ enum lantiq_mach_type {
- LANTIQ_MACH_EASY98000, /* Falcon Eval Board, NOR Flash */
- LANTIQ_MACH_EASY98000SF, /* Falcon Eval Board, Serial Flash */
- LANTIQ_MACH_EASY98000NAND, /* Falcon Eval Board, NAND Flash */
-+ LANTIQ_MACH_EASY98020, /* EASY98020 Eval Board */
-+ LANTIQ_MACH_EASY98020_1LAN, /* EASY98020 Eval Board (1 LAN port) */
-+ LANTIQ_MACH_EASY98020_2LAN, /* EASY98020 Eval Board (2 LAN port) */
-+ LANTIQ_MACH_95C3AM1, /* 95C3AM1 Eval Board */
-+
-+ /* Arcadyan */
-+ LANTIQ_MACH_ARV3527P, /* Arcor easybox a401 */
-+ LANTIQ_MACH_ARV4510PW, /* Wippies Homebox */
-+ LANTIQ_MACH_ARV4518PW, /* Airties WAV-221, SMC-7908A-ISP */
-+ LANTIQ_MACH_ARV4519PW, /* Vodafone, Pirelli */
-+ LANTIQ_MACH_ARV4520PW, /* Airties WAV-281, Arcor EasyboxA800 */
-+ LANTIQ_MACH_ARV452CPW, /* Arcor EasyboxA801 */
-+ LANTIQ_MACH_ARV4525PW, /* Speedport W502V */
-+ LANTIQ_MACH_ARV7525PW, /* Speedport W303V */
-+ LANTIQ_MACH_ARV752DPW, /* Arcor easybox a802 */
-+ LANTIQ_MACH_ARV752DPW22, /* Arcor easybox a803 */
-+ LANTIQ_MACH_ARV7518PW, /* ASTORIA */
-+
-+ /* Netgear */
-+ LANTIQ_MACH_DGN3500B, /* Netgear DGN3500 */
-+
-+ /* FRITZ!BOX */
-+ LANTIQ_MACH_FRITZ3370, /* FRITZ!BOX 3370 vdsl cpe */
-+ LANTIQ_MACH_FRITZ7320, /* FRITZ!BOX 7320 1&1 homeserver */
-+
-+ /* Gigaset */
-+ LANTIQ_MACH_GIGASX76X, /* Gigaset SX76x */
-+
-+ /* Buffalo */
-+ LANTIQ_MACH_WBMR, /* WBMR-HP-G300H */
-+
-+ /* ZyXEL */
-+ LANTIQ_MACH_P2601HNFX, /* ZyXEL P-2601HN-Fx */
-+
-+ /* ZTE */
-+ LANTIQ_MACH_H201L, /* ZTE ZXV10 H201L */
- };
-
- #endif
---- a/arch/mips/lantiq/xway/Kconfig
-+++ b/arch/mips/lantiq/xway/Kconfig
-@@ -6,6 +6,38 @@ config LANTIQ_MACH_EASY50712
- bool "Easy50712 - Danube"
- default y
-
-+config LANTIQ_MACH_ARV
-+ bool "ARV"
-+ default y
-+
-+config LANTIQ_MACH_NETGEAR
-+ bool "Netgear"
-+ default y
-+
-+config LANTIQ_MACH_GIGASX76X
-+ bool "GIGASX76X"
-+ default y
-+
-+config LANTIQ_MACH_WBMR
-+ bool "WBMR-HP-G300H"
-+ default y
-+
-+config LANTIQ_MACH_P2601HNFX
-+ bool "P2601HNFX"
-+ default y
-+
-+config LANTIQ_MACH_H201L
-+ bool "H201L"
-+ default y
-+
-+config LANTIQ_MACH_FRITZ_VR9
-+ bool "FRITZ3370"
-+ default y
-+
-+config LANTIQ_MACH_FRITZ_AR9
-+ bool "FRITZ7320"
-+ default y
-+
- endmenu
-
- choice
---- a/arch/mips/lantiq/xway/Makefile
-+++ b/arch/mips/lantiq/xway/Makefile
-@@ -2,3 +2,11 @@ obj-y := sysctrl.o reset.o gpio.o gpio_s
-
- obj-$(CONFIG_LANTIQ_MACH_EASY50712) += mach-easy50712.o
- obj-$(CONFIG_LANTIQ_MACH_EASY50601) += mach-easy50601.o
-+obj-$(CONFIG_LANTIQ_MACH_ARV) += mach-arv.o
-+obj-$(CONFIG_LANTIQ_MACH_FRITZ_AR9) += mach-fritz_ar9.o
-+obj-$(CONFIG_LANTIQ_MACH_FRITZ_VR9) += mach-fritz_vr9.o
-+obj-$(CONFIG_LANTIQ_MACH_GIGASX76X) += mach-gigasx76x.o
-+obj-$(CONFIG_LANTIQ_MACH_NETGEAR) += mach-netgear.o
-+obj-$(CONFIG_LANTIQ_MACH_WBMR) += mach-wbmr.o
-+obj-$(CONFIG_LANTIQ_MACH_P2601HNFX) += mach-p2601hnfx.o
-+obj-$(CONFIG_LANTIQ_MACH_H201L) += mach-h201l.o
---- a/arch/mips/lantiq/falcon/Kconfig
-+++ b/arch/mips/lantiq/falcon/Kconfig
-@@ -6,6 +6,14 @@ config LANTIQ_MACH_EASY98000
- bool "Easy98000"
- default y
-
-+config LANTIQ_MACH_EASY98020
-+ bool "Easy98020"
-+ default y
-+
-+config LANTIQ_MACH_95C3AM1
-+ bool "95C3AM1"
-+ default y
-+
- endmenu
-
- endif
---- a/arch/mips/lantiq/falcon/Makefile
-+++ b/arch/mips/lantiq/falcon/Makefile
-@@ -1,2 +1,6 @@
- obj-y := prom.o reset.o sysctrl.o devices.o gpio.o
-+obj-$(CONFIG_LANTIQ_MACH_EASY98000) += addon-easy98000.o
-+obj-$(CONFIG_LANTIQ_MACH_EASY98000) += dev-leds-easy98000-cpld.o
- obj-$(CONFIG_LANTIQ_MACH_EASY98000) += mach-easy98000.o
-+obj-$(CONFIG_LANTIQ_MACH_EASY98020) += mach-easy98020.o
-+obj-$(CONFIG_LANTIQ_MACH_95C3AM1) += mach-95C3AM1.o
---- a/arch/mips/lantiq/falcon/mach-easy98000.c
-+++ b/arch/mips/lantiq/falcon/mach-easy98000.c
-@@ -1,23 +1,38 @@
--/*
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- *
-- * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
-- * Copyright (C) 2011 John Crispin <blogic@openwrt.org>
-- */
--
-+#include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/gpio.h>
-+#include <linux/gpio_buttons.h>
-+#include <linux/etherdevice.h>
-+#include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/dm9000.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #include <linux/spi/eeprom.h>
-+#include <falcon/lantiq_soc.h>
-
- #include "../machtypes.h"
-
- #include "devices.h"
-+#include "dev-leds-gpio.h"
-+
-+#define EASY98000_GPIO_LED_0 9
-+#define EASY98000_GPIO_LED_1 10
-+#define EASY98000_GPIO_LED_2 11
-+#define EASY98000_GPIO_LED_3 12
-+#define EASY98000_GPIO_LED_4 13
-+#define EASY98000_GPIO_LED_5 14
-
--static struct mtd_partition easy98000_nor_partitions[] = {
-+extern unsigned char ltq_ethaddr[6];
-+
-+static struct mtd_partition easy98000_nor_partitions[] =
-+{
- {
- .name = "uboot",
- .offset = 0x0,
-@@ -35,7 +50,7 @@ static struct mtd_partition easy98000_no
- },
- };
-
--struct physmap_flash_data easy98000_nor_flash_data = {
-+static struct physmap_flash_data easy98000_nor_flash_data = {
- .nr_parts = ARRAY_SIZE(easy98000_nor_partitions),
- .parts = easy98000_nor_partitions,
- };
-@@ -55,12 +70,105 @@ static struct spi_board_info easy98000_s
- .platform_data = &easy98000_spi_flash_platform_data
- };
-
-+static struct gpio_led easy98000_leds_gpio[] __initdata = {
-+ {
-+ .name = "easy98000:green:0",
-+ .gpio = EASY98000_GPIO_LED_0,
-+ .active_low = 0,
-+ }, {
-+ .name = "easy98000:green:1",
-+ .gpio = EASY98000_GPIO_LED_1,
-+ .active_low = 0,
-+ }, {
-+ .name = "easy98000:green:2",
-+ .gpio = EASY98000_GPIO_LED_2,
-+ .active_low = 0,
-+ }, {
-+ .name = "easy98000:green:3",
-+ .gpio = EASY98000_GPIO_LED_3,
-+ .active_low = 0,
-+ }, {
-+ .name = "easy98000:green:4",
-+ .gpio = EASY98000_GPIO_LED_4,
-+ .active_low = 0,
-+ }, {
-+ .name = "easy98000:green:5",
-+ .gpio = EASY98000_GPIO_LED_5,
-+ .active_low = 0,
-+ }
-+};
-+
-+#define CONFIG_DM9000_BASE 0x14000000
-+#define DM9000_IO (CONFIG_DM9000_BASE + 3)
-+#define DM9000_DATA (CONFIG_DM9000_BASE + 1)
-+
-+static struct dm9000_plat_data dm9000_plat_data = {
-+ .flags = DM9000_PLATF_8BITONLY,
-+ //.dev_addr = { }, /* possibility to provide an ethernet address for the chip */
-+};
-+
-+static struct resource dm9000_resources[] = {
-+ MEM_RES("dm9000_io", DM9000_IO, DM9000_IO),
-+ MEM_RES("dm9000_data", DM9000_DATA, DM9000_DATA),
-+ [2] = {
-+ /* with irq (210 -> gpio 110) the driver is very unreliable */
-+ .start = -1, /* use polling */
-+ .end = -1,
-+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-+ },
-+};
-+
-+static struct platform_device dm9000_platform = {
-+ .name = "dm9000",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(dm9000_resources),
-+ .resource = dm9000_resources,
-+ .dev = {
-+ .platform_data = (void *) &dm9000_plat_data,
-+ }
-+};
-+
-+extern int easy98000_addon_has_dm9000(void);
-+static void __init register_davicom(void)
-+{
-+ if (!easy98000_addon_has_dm9000())
-+ return;
-+
-+ if (!is_valid_ether_addr(ltq_ethaddr))
-+ random_ether_addr(dm9000_plat_data.dev_addr);
-+ else {
-+ memcpy(dm9000_plat_data.dev_addr, ltq_ethaddr, 6);
-+ /* change to "Locally Administered Address" */
-+ dm9000_plat_data.dev_addr[0] |= 0x2;
-+ }
-+ platform_device_register(&dm9000_platform);
-+}
-+
-+static struct i2c_gpio_platform_data easy98000_i2c_gpio_data = {
-+ .sda_pin = 107,
-+ .scl_pin = 108,
-+};
-+
-+static struct platform_device easy98000_i2c_gpio_device = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &easy98000_i2c_gpio_data,
-+ }
-+};
-+
-+void __init register_easy98000_cpld(void)
-+{
-+ platform_device_register_simple("easy98000_cpld_led", 0, NULL, 0);
-+ platform_device_register_simple("easy98000_addon", 0, NULL, 0);
-+}
-+
- /* setup gpio based spi bus/device for access to the eeprom on the board */
--#define SPI_GPIO_MRST 102
--#define SPI_GPIO_MTSR 103
--#define SPI_GPIO_CLK 104
--#define SPI_GPIO_CS0 105
--#define SPI_GPIO_CS1 106
-+#define SPI_GPIO_MRST 102
-+#define SPI_GPIO_MTSR 103
-+#define SPI_GPIO_CLK 104
-+#define SPI_GPIO_CS0 105
-+#define SPI_GPIO_CS1 106
- #define SPI_GPIO_BUS_NUM 1
-
- static struct spi_gpio_platform_data easy98000_spi_gpio_data = {
-@@ -94,11 +202,22 @@ static struct spi_board_info easy98000_s
- };
-
- static void __init
--easy98000_init_common(void)
-+easy98000_spi_gpio_init(void)
- {
- spi_register_board_info(&easy98000_spi_gpio_devices, 1);
- platform_device_register(&easy98000_spi_gpio_device);
-+}
-+
-+static void __init
-+easy98000_init_common(void)
-+{
- falcon_register_i2c();
-+ platform_device_register(&easy98000_i2c_gpio_device);
-+ register_davicom();
-+ ltq_add_device_leds_gpio(-1, ARRAY_SIZE(easy98000_leds_gpio),
-+ easy98000_leds_gpio);
-+ register_easy98000_cpld();
-+ easy98000_spi_gpio_init();
- }
-
- static void __init
projects / openwrt / svn-archive / archive.git / blobdiff