+++ /dev/null
-/*
- * Support for IBM PPC 405EP-based MagicBox board
- * Copyright (C) 2006 Karol Lewandowski
- *
- * Heavily based on bubinga.c
- *
- * Author: SAW (IBM), derived from walnut.c.
- * Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/blkdev.h>
-#include <linux/pci.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/kgdb.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-
-#include <platforms/4xx/ibm405ep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-extern bd_t __res;
-
-/* Some IRQs unique to the board
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {28, 28, 28, 28}, /* IDSEL 1 - PCI slot 1 */
- {29, 29, 29, 29}, /* IDSEL 2 - PCI slot 2 */
- {30, 30, 30, 30}, /* IDSEL 3 - PCI slot 3 */
- {31, 31, 31, 31}, /* IDSEL 4 - PCI slot 4 */
- };
-
- const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-};
-
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-magicbox_early_serial_map(void)
-{
- u32 uart_div;
- int uart_clock;
- struct uart_port port;
-
- /* Calculate the serial clock input frequency
- *
- * The base baud is the PLL OUTA (provided in the board info
- * structure) divided by the external UART Divisor, divided
- * by 16.
- */
- uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
- uart_clock = __res.bi_procfreq / uart_div;
-
- /* Setup serial port access */
- memset(&port, 0, sizeof(port));
- port.membase = (void*)ACTING_UART0_IO_BASE;
- port.irq = ACTING_UART0_INT;
- port.uartclk = uart_clock;
- port.regshift = 0;
- port.iotype = UPIO_MEM;
- port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- port.line = 0;
-
- if (early_serial_setup(&port) != 0) {
- printk("Early serial init of port 0 failed\n");
- }
-
- port.membase = (void*)ACTING_UART1_IO_BASE;
- port.irq = ACTING_UART1_INT;
- port.line = 1;
-
- if (early_serial_setup(&port) != 0) {
- printk("Early serial init of port 1 failed\n");
- }
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-
- unsigned int bar_response, bar;
- /*
- * Expected PCI mapping:
- *
- * PLB addr PCI memory addr
- * --------------------- ---------------------
- * 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
- * 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
- *
- * PLB addr PCI io addr
- * --------------------- ---------------------
- * e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
- *
- * The following code is simplified by assuming that the bootrom
- * has been well behaved in following this mapping.
- */
-
-#ifdef DEBUG
- int i;
-
- printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
- printk("PCI bridge regs before fixup \n");
- for (i = 0; i <= 3; i++) {
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
- }
- printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
- printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
- printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
- printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
- /* added for IBM boot rom version 1.15 bios bar changes -AK */
-
- /* Disable region first */
- out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
- /* PLB starting addr, PCI: 0x80000000 */
- out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
- /* PCI start addr, 0x80000000 */
- out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
- /* 512MB range of PLB to PCI */
- out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
- /* Enable no pre-fetch, enable region */
- out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
- (PPC405_PCI_UPPER_MEM -
- PPC405_PCI_MEM_BASE)) | 0x01));
-
- /* Disable region one */
- out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
- out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
- out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
- /* Disable region two */
- out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
- out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
- out_le32((void *) &(pcip->ptm2ms), 0x00000000);
- out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
- /* Zero config bars */
- for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
- early_write_config_dword(hose, hose->first_busno,
- PCI_FUNC(hose->first_busno), bar,
- 0x00000000);
- early_read_config_dword(hose, hose->first_busno,
- PCI_FUNC(hose->first_busno), bar,
- &bar_response);
- DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
- hose->first_busno, PCI_SLOT(hose->first_busno),
- PCI_FUNC(hose->first_busno), bar, bar_response);
- }
- /* end workaround */
-
-#ifdef DEBUG
- printk("PCI bridge regs after fixup \n");
- for (i = 0; i <= 3; i++) {
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
- printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
- }
- printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
- printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
- printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
- printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-}
-
-static struct resource magicbox_flash_resource = {
- .start = 0xffc00000,
- .end = 0xffffffffULL,
- .flags = IORESOURCE_MEM,
-};
-
-static struct mtd_partition magicbox_flash_parts[] = {
- {
- .name = "linux",
- .offset = 0x0,
- .size = 0x3c0000,
- },
- {
- .name = "rootfs",
- .offset = 0x100000,
- .size = 0x2c0000,
- }
-};
-
-static struct physmap_flash_data magicbox_flash_data = {
- .width = 2,
- .parts = magicbox_flash_parts,
- .nr_parts = ARRAY_SIZE(magicbox_flash_parts),
-};
-
-static struct platform_device magicbox_flash_device = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &magicbox_flash_data,
- },
- .num_resources = 1,
- .resource = &magicbox_flash_resource,
-};
-
-static int magicbox_setup_flash(void)
-{
- platform_device_register(&magicbox_flash_device);
-
- return 0;
-};
-
-arch_initcall (magicbox_setup_flash);
-
-void __init
-magicbox_setup_arch(void)
-{
- ppc4xx_setup_arch();
-
- ibm_ocp_set_emac(0, 1);
-
- magicbox_early_serial_map();
-
- /* Identify the system */
- printk("MagicBox port (C) 2005 Karol Lewandowski <kl@jasmine.eu.org>\n");
-}
-
-void __init
-magicbox_map_io(void)
-{
- ppc4xx_map_io();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
- unsigned long r6, unsigned long r7)
-{
- ppc4xx_init(r3, r4, r5, r6, r7);
-
- ppc_md.setup_arch = magicbox_setup_arch;
- ppc_md.setup_io_mappings = magicbox_map_io;
-
-#ifdef CONFIG_KGDB
- ppc_md.early_serial_map = bubinga_early_serial_map;
-#endif
-}
-
projects / openwrt / svn-archive / archive.git / blobdiff