ramips: unbreak rt2880 support

[openwrt/svn-archive/archive.git] / target / linux / ramips / dts / V11STFE.dts

diff --git a/target/linux/ramips/dts/V11STFE.dts b/target/linux/ramips/dts/V11STFE.dts
new file mode 100644 (file)
index 0000000..20cbaea
--- /dev/null
+++ b/target/linux/ramips/dts/V11STFE.dts
@@ -0,0 +1,93 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+       compatible = "V11ST-FE", "ralink,rt2880-soc";
+       model = "Ralink V11ST-FE";
+
+       palmbus@300000 {
+               sysc@0 {
+                       ralink,pinmux = "uartlite";
+                       ralink,gpiomux = "i2c", "jtag";
+                       ralink,uartmux = "gpio";
+                       ralink,pcimux = "pci-fnc";
+                       ralink,wdtmux = <0>;
+               };
+
+               gpio0: gpio@600 {
+                       status = "okay";
+               };
+       };
+
+       ethernet@400000 {
+               status = "okay";
+       };
+
+       wmac@480000 {
+               status = "okay";
+       };
+
+       pci@10140000 {
+               status = "okay";
+
+               host-bridge {
+                       pci-bridge@1 {
+                               status = "okay";
+                       };
+               };
+       };
+
+       nor-flash@1c000000 {
+               compatible = "cfi-flash";
+               reg = <0x1c000000 0x800000>;
+
+               bank-width = <2>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               partition@0 {
+                       reg = <0x0 0x0030000>;
+                       label = "u-boot";
+                       read-only;
+               };
+
+               partition@30000 {
+                       reg = <0x00030000 0x00010000>;
+                       label = "u-boot-env";
+                       read-only;
+               };
+
+               partition@40000 {
+                       reg = <0x00040000 0x00010000>;
+                       label = "factory";
+                       read-only;
+               };
+
+               partition@50000 {
+                       reg = <0x00050000 0x003b0000>;
+                       label = "firmware";
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <100>;
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 0 0>;
+                       linux,code = <0x211>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               status {
+                       label = "v11st-fe:green:status";
+                       gpios = <&gpio0 12 1>;
+               };
+       };
+};